V-tech CS6124 User manual

Online user’s manual
w w w.v t e c h p h o n e s . c o m
Models:
CS6120-2/CS6124

Congratulations
on purchasing your new VTech product. Before using this telephone, please read
Important safety instructions on page 40 of this manual.
This manual has all the feature operations and troubleshooting necessary to install
and operate your new VTech telephone. Please review this manual thoroughly to
ensure proper installation and operation of this innovative and feature rich VTech
product. For support, shopping, and everything new at VTech, visit our website at
www.vtechphones.com. In Canada, please visit www.vtechcanada.com.
The ENERGY STAR®program (www.energystar.gov) recognizes and
encourages the use of products that save energy and help protect our
environment. We are proud to mark this product with the ENERGY STAR®
label indicating it meets the latest energy efciency guidelines.
T
Compatible with
Hearing Aid T-Coil
TIA-1083
Telephones identied with this logo have reduced noise and interference
when used with most T-coil equipped hearing aids and cochlear implants. The
TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry
Association. Used under license.
i

Table of contents
ii
Getting started . . . . . . . . . . . . . . . . .1
Partschecklist ..................1
Telephone base and charger
installation....................2
Wall mounting (optional). . . . . . . . . . .2
Battery installation . . . . . . . . . . . . . . .3
Battery charging . . . . . . . . . . . . . . . . .3
Handset layout . . . . . . . . . . . . . . . . . .4
Telephone base layout . . . . . . . . . . . .6
Telephone settings. . . . . . . . . . . . . .7
Usingthemenu .................7
Ringer volume (telephone base) . . . .7
Ringer volume (handset) . . . . . . . . . .7
Ringertone.....................7
LCDlanguage...................8
Clearvoicemail..................8
Keytone.......................9
Setdateandtime................9
Homeareacode................10
Dialmode.....................10
Website.......................10
Telephone operation . . . . . . . . . . .11
Makeacall....................11
Predialacall...................11
Answeracall ..................11
Endacall.....................11
Volume.......................11
Mute . . . . . . . . . . . . . . . . . . . . . . . . .11
Callwaiting....................11
Temporary ringer silencing. . . . . . . .12
Temporary tone dialing. . . . . . . . . . .12
Findhandset...................12
Multiple handset use. . . . . . . . . . . . .13
Chaindialing...................13
Rediallist.....................14
Review and dial from the
rediallist....................14
Delete a redial entry . . . . . . . . . . . . .14
Directory......................14
Add a directory entry . . . . . . . . . . . .15
Review and dial from
thedirectory .................16
Alphabetical search . . . . . . . . . . . . .16
Edit a directory entry. . . . . . . . . . . . .17
Delete a directory entry . . . . . . . . . .17
AboutcallerID.................18
Call log . . . . . . . . . . . . . . . . . . . . . . .18
Missed call indicator . . . . . . . . . . . . .19
Memorymatch.................19
Review and dial from the
calllog......................19
View dialing options . . . . . . . . . . . . .20
Save a call log entry to
thedirectory .................20
Delete the call log entries . . . . . . . . .21
Call log display screen
messages . . . . . . . . . . . . . . . . . . .21
Answering system settings. . . . . . 22
Answering system setup. . . . . . . . . .22
AnswerON/OFF................22
Callscreening..................22
Number of rings . . . . . . . . . . . . . . . .23
Remote access code . . . . . . . . . . . .23
Message alert tone. . . . . . . . . . . . . . 23
Recordingtime.................24
Announcement.................24
Record your own
announcement . . . . . . . . . . . . . . .24
Play or delete your own
announcement . . . . . . . . . . . . . . .25
Answering system operation . . . .26
Answering system and
voicemail....................26
Message capacity. . . . . . . . . . . . . . .26
New message indication. . . . . . . . . .27
Callintercept...................27
Message playback . . . . . . . . . . . . . .27
Delete all messages . . . . . . . . . . . . .28
Record, play or delete memos . . . . .28
Message window displays . . . . . . . .29
Remoteaccess.................30

iii
Table of contents
Appendix.....................31
Display screen messages. . . . . . . . .31
Handset and telephone base
indicators....................32
Handset screen icons. . . . . . . . . . . . 32
Battery .......................33
Troubleshooting . . . . . . . . . . . . . . . .34
Important safety instructions. . . . . . .40
Precautions for users of implanted
cardiac pacemakers . . . . . . . . . . .41
Operating range . . . . . . . . . . . . . . . .41
Maintenance...................41
About cordless telephones . . . . . . . .42
The RBRC®seal................42
Limited warranty . . . . . . . . . . . . . . . .43
FCC, ACTA and IC regulations . . . .45
Technical specications . . . . . . . . . .46
Index ........................47

1
Parts checklist
Your telephone contains the following items. Save your sales receipt and original
packaging in the event warranty service is necessary.
To purchase a replacement battery or power adapter, visit our website at
www.vtechphones.com or call 1 [phone]. In Canada, go to
www.vtechcanada.com or call 1 [phone].
•
Getting started
User’s manual
Telephone base
Telephone base
power adapter
Telephone
line cord
Quick start guide
Battery compartment
cover
(1 for CS6124 and 2 for CS6120-2)
Battery
(1 for CS6124 and
2 for CS6120-2)
Handset
(1 for CS6124 and
2 for CS6120-2)
Charger and
charger adapter
(1 for CS6120-2)
User’s manual Quick start guide

2
Use only the power adapters supplied with this product.
The power adapters are intended to be correctly oriented in a vertical or oor mount
position. The prongs are not designed to hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
•
•
Getting started
Wall mounting (optional)
Your telephone comes ready for tabletop use.
To mount your telephone on the wall:
Position the top hole at the back of
the telephone base against the top
mounting stud [A].
Slide the telephone base down on
the mounting studs [A] and [B] until
it locks into place.
1.
2.
Telephone base
[A]
[B]
Mounting
studs
Telephone base and charger installation
Install the telephone base and charger as shown below.
If you subscribe to digital subscriber line (DSL) high-speed Internet service through
your telephone line, you must install a DSL lter between the telephone line cord
and telephone wall jack. Contact your DSL service provider for more information
about DSL lter.
Telephone base
Telephone
line cord
Electrical outlet
(not controlled by
a wall switch)
Telephone
wall jack
A DSL lter (not
included) is required
if you have DSL
high-speed Internet
service
Telephone base
power adapter
Charger
Charger
adapter

3
If the handset will not be used for a long period of time, disconnect and remove the
battery to prevent any possible leakage.
Battery installation
Install the battery as shown below.
1
CHARGE light remains
on when charging.
2
3
Plug the battery connector securely
into the socket.
Place the battery with the wires inside
the battery compartment.
Slide the battery compartment
cover towards the center of the
handset until it clicks into place.
Place the handset in the telephone
base or charger to charge.
4
If you are on a call in low battery mode, the handset beeps every 50 seconds.
If you place the handset in the telephone base or charger without plugging in the
battery, the screen displays No battery.
•
•
Battery charging
Once you have installed the battery, the screen indicates the battery status. For best
performance, keep the handset in the telephone base or charger when not in use.
The battery is fully charged after 16 hours of continuous charging.
Battery indicators Battery status Action
The screen is blank, or
displays Place in charger
and ashes.
Battery has very little or no
charge. The handset cannot
be used.
Charge without interruption (at
least 30 minutes).
The screen displays Low
battery and ashes.
Battery has enough charge to
be used for a short time.
Charge without interruption
(about 30 minutes).
The screen displays
HANDSET X and
-:-- --/--.
Battery is charged. To keep the battery charged,
place it in the telephone base
or charger when not in use.
Getting started

4
Handset layout
CID/VOL- (caller ID/volume)
Press to review the call log when the telephone is not
in use (page 19).
During a call, press to decrease the listening volume. A
double beep sounds at the lowest setting (page 11).
Press to scroll down while in a menu, or reviewing the
directory, call log or redial list.
When entering numbers or names in the directory,
press to move the cursor to the left.
/FLASH
Press to make or answer a call (page 11).
During a call, press to answer an incoming call when you
receive a call waiting alert (page 11).
CHARGE light
On when the handset is charging in the telephone
base or charger (page 3).
CANCEL
MUTE/DELETE
While on a call, press to mute the microphone (page 11).
While using the dialing keys, press to delete digits and
characters.
While the handset is ringing, press to silence the ringer
temporarily (page 12).
When reviewing the directory, call log or redial list, press to delete the
displayed entry (page 17, 21 or 14).
TONE
While on a call, press to switch to tone dialing
temporarily when using the pulse service (page 12).
Dialing keys
Press to enter numbers or characters.
1
Press repeatedly to add or remove 1in front of
the call log entry before dialing or saving it to
the directory (page 20).
Getting started

5
Getting started
Handset layout
/VOL+ (directory/volume)
Press to review the directory when the telephone is not
in use (page 16).
During a call, press to increase the listening volume. A
double beep sounds at the highest setting (page 11).
Press to scroll up while in a menu, or reviewing the
directory, call log or redial list.
When entering numbers or names in the directory, press
to move the cursor to the right.
MENU/SELECT
Press to show the menu.
While in a menu, press to choose an item, or save an
entry or setting.
OFF/CANCEL
During a call, press to hang up.
While the handset is ringing, press to silence the ringer
temporarily (page 12).
While the telephone is not in use, press and hold to erase
the missed call indicator (page 19).
While in a menu, press to return to the previous menu.
While in a menu, press and hold to return to idle mode.
While predialing, press to delete digits (page 11).
REDIAL/PAUSE
Press repeatedly to review the redial list (page 14).
While dialing or entering numbers into the directory, press
and hold to insert a dialing pause (pages 11 and 15).
#
Press repeatedly to show other dialing options when
reviewing a call log entry (page 20).
CANCEL

6
Getting started
Telephone base layout
/FIND HANDSET
Press once and then
release to page all system
handsets (page 12).
Message window
Shows the number of
messages and other
answering system information
(page 29).
X/DELETE
Press to delete the message
currently playing (page 27).
When the telephone is not
in use, press twice to delete
all previously reviewed
messages (page 28).
/ANS ON/OFF
Press to turn the answering
system on or off (page 22).
/PLAY/STOP
Press to play messages (page
27).
Press to stop message
playback (page 27).
/ /VOLUME
Press to adjust the volume during playback
(page 27).
When the phone is not in use, press to adjust
the telephone base ringer volume (page 7).
IN USE light
Flashes when there is an
incoming call, or another
telephone sharing the same
line is in use.
On when the telephone is in
use, or the answering system
is answering a call.
/SKIP
Press to skip to the next
message (page 27).
/REPEAT
Press to repeat the message
or press twice to play
the previous message
(page 27).

7
Using the menu
To enter the handset menu:
Press MENU/SELECT when the telephone is not in use.
Press CID or until the screen displays the desired feature menu.
Press MENU/SELECT to enter that menu.
To return to the previous menu, press OFF/CANCEL.
To return to idle mode, press and hold OFF/CANCEL.
Ringer volume (telephone base)
Press /VOLUME or /VOLUME on the telephone base to adjust the ringer volume
when the telephone is not in use. When you set the ringer volume to zero, the base
ringer is off and the system announces, “ Base ringer is off.”
Ringer volume (handset)
You can adjust the ringer volume or turn the ringer off.
Press MENU/SELECT when the handset is not in use.
Press CID or until the screen displays Ringers, then
pressress MENU/SELECT twice.
The screen displays Volume: with the current setting
ashing. Press CID or to choose Off, Low or High.
A sample of each ringer volume plays as you scroll through
the choices.
Press MENU/SELECT to save your selection. You hear a
conrmation tone.
Ringer tone
You can change the handset ringer tone.
Press MENU/SELECT when the handset is not in use.
Press CID or until the screen displays Ringers,
then press MENU/SELECT.
Press CID or until the screen displays
Ringer tone, then press MENU/SELECT.
The screen displays Tone: with the current setting
ashing. PressPress CID or to choose 1, 2,3, or 4.
A sample of each ringer tone plays as you scroll through
the choices.
Press MENU/SELECT to save your selection. You hear a
conrmation tone.
1.
2.
3.
•
•
1.
2.
3.
4.
1.
2.
3.
4.
5.
Telephone settings
Ringers
Volume:High
If the ringer volume is set to Off, Ringer off is displayed on the idle screen.
When the ringer volume is set to Off, the handset still rings when you press
/FIND HANDSET.
•
•
If you turn off the ringer volume, you will not hear ringer
tone samples.
•
Ringers
Ringer tone
Tone: 1

8
Telephone settings
LCD language
The LCD language is preset to English. You can select English, French or Spanish to
be used in all screen displays.
To select a language:
Press MENU/SELECT when the handset is not in use.
Press CID or until the screen displays Settings,then
press MENU/SELECT twice.
Press CID or to choose English, Français or
Español, then press MENU/SELECT to save your setting.
You hear a conrmation tone.
Clear voicemail
If you subscribe to voicemail service offered by your telephone service provider,
New voicemail and are displayed on the handset when you have new voicemail
messages. Contact your telephone service provider for more information about
using your voicemail service.
After you have listened to all new voicemail messages, the indicators on the handset
turn off automatically.
Use the clear voicemail feature when the telephone indicates that there is new
voicemail but there are none (for example, when you have accessed your voicemail
while away from home). The clear voicemail feature only turns off the indicators;
it does not delete your voicemail messages. As long as you have new voicemail
messages, your telephone service provider continues to send the signal that turns
on the indicators.
To manually turn off these indicators:
Press MENU/SELECT when the handset is not in use.
Press CID or until the screen displays Settings,then
press MENU/SELECT.
Press CID or until the screen displays Clr voicemail,
then press MENU/SELECT. The screen displays
Clear VM icon?
Press MENU/SELECT to conrm your selection. You hear a
conrmation tone.
1.
2.
3.
1.
2.
3.
3.
Your telephone service provider may alert you of new
messages with a stutter (broken) dial tone. Contact your
telephone service provider for details.
•
Settings
LCD language
Settings
Clr voicemail
Clear VM icon?

9
Telephone settings
Key tone
You can turn the key tone on or off.
Press MENU/SELECT when the handset is not in use.
Press CID or until the screen displays Settings,then
press MENU/SELECT.
Press CID or until the screen displays Key tone,
then press MENU/SELECT.
Press CID or to choose On or Off, then press
MENU/SELECT to conrm your selection. You hear a
conrmation tone.
Set date and time
The answering system announces the date and time of each message prior to
playing it. Before using the answering system, set the date and time as follows. If
you subscribe to caller ID service, the day, month and time are set automatically
with each incoming call. However, the year must be correct so that the day of the
week can be calculated from the caller ID information.
To change the setting:
Press MENU/SELECT when the handset is not in use.
Press CID or until the screen displays Settings,
then press MENU/SELECT.
Press CID or until the screen displays
Set date/time, then press MENU/SELECT.
When the month is ashing, press CID or until the
screen displays the correct month and then press
MENU/SELECT; or, press the dialing keys (0-9) to enter the
current month (for example, if the month is March, you
must enter 03).
Repeat step 4 to set the correct date and year and then
press MENU/SELECT to advance to time setting.
When the hour is ashing, press CID or until the
screen displays the correct hour and then press
MENU/SELECT; or, press the dialing keys (0-9) to enter the
current hour (for example, if the time is two o’clock, you
must enter 02).
Repeat step 6 to set the correct minute. When AM or PM
is ashing, press CID or to select AM or PM. Press
MENU/SELECT to save your settings. You hear a conrmation tone.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
7.
If the date and time are not set when a message is recorded, the system
announces, “Time and date not set,” before each message plays.
When there is a power failure or after battery replacement, the date and time need
to be reset.
•
•
Settings
Key tone
On
Settings
Set date/time
Date: 03/25/10
Time: 02:35 PM

10
Telephone settings
Home area code
If you dial local calls using only seven digits (area code not required), you can
program your home area code so that when you receive a call within your local area,
the telephone number is automatically stored in the call log without the area code.
To change the setting:
Press MENU/SELECT when the handset is not in use.
Press CID or until the screen displays Settings,
then press MENU/SELECT.
Press CID or until the screen displays
Home area code, then press MENU/SELECT. The screen
displays the current stored home area code.
Use the dialing keys (0-9) to enter the desired home
area code.
Press MUTE/DELETE to delete a digit.
Press and hold MUTE/DELETE to delete all digits.
Press MENU/SELECT to conrm. You hear a conrmation tone.
Dial mode
The default dial mode is tone dialing. If you have pulse (rotary) service, you need to
change the dial mode to pulse dialing.
To change the setting:
Press MENU/SELECT when the handset is not in use.
Press CID or until the screen displays Settings, then press
MENU/SELECT.
Press CID or until the screen displays Dial mode, then press
MENU/SELECT.
Press CID or to choose Tone or Pulse, then press MENU/SELECT to conrm
your selection. You hear a conrmation tone.
Website
Use this feature to view the VTech website address.
Press MENU/SELECT when the handset is not in use.
Press CID or until the screen displays Website, then press
MENU/SELECT. The screen displays the VTech website address.
1.
2.
3.
4.
•
•
5.
1.
2.
3.
4.
1.
2.
Home area code
Home area code
___
If, in the future, your telephone service provider requires you to dial the area code
when making a local call, or, if you move to a location that requires it, delete the home
area code you have already programmed following the steps above. After you have
deleted the home area code, _ _ _ appears.

11
Telephone operation
Make a call
Press /FLASH and then use the dialing keys (0-9) to dial
the telephone number.
Predial a call
Enter the telephone number using the dialing keys (0-9), then
press /FLASH to dial.
Answer a call
Press /FLASH or any of the dialing keys (0-9, TONE or #).
End a call
Press OFF/CANCEL or put the handset to the telephone base or charger.
Volume
During a call, press CID/VOL-or /VOL+to adjust the
listening volume.
Mute
The mute function allows you to hear the other party but the
other party cannot hear you.
During a call, press MUTE/DELETE on the handset.
The handset screen displays Muted until the mute
function is turned off.
Press MUTE/DELETE again to resume the conversation. The
handset screen temporarily displays Microphone on.
Call waiting
When you subscribe to call waiting service from your telephone service provider,
you hear an alert tone if there is an incoming call while you are on another call.
Press /FLASH to put the current call on hold and take the new call.
Press /FLASH at any time to switch back and forth between calls.
•
•
•
•
•
1.
2.
•
•
Muted
10:15 PM 12/25
CANCEL
CANCEL
CANCEL
CANCEL
CANCEL
CANCEL
The screen shows the elapsed time as you talk (in hours, minutes and seconds).
When predialing (preview numbers before dialing), press MUTE/DELETE or
OFF/CANCEL to backspace and delete; press and hold REDIAL/PAUSE to insert a
dialing pause (a Pappears).
If the handset is moved out of range while on a call, it will beep three times.
•
•
•

12
Telephone operation
Temporary ringer silencing
When the telephone is ringing, you can temporarily silence the ringer of the handset
or telephone base without disconnecting the call. The next call rings normally at the
preset volume.
To silence the handset ringer:
Press OFF/CANCEL or MUTE/DELETE and then
Ringer muted displays.
To silence the telephone base ringer:
Press /VOLUME once.
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to tone dialing
temporarily during a call. This is useful if you need to send touch-tone signals to
access your telephone banking or long distance services.
During a call, press TONE .
Use the dialing keys to enter the number. The telephone sends touch-tone signals.
The telephone automatically returns to pulse dialing mode after you end the call.
Find handset
Use this feature to nd all system handsets.
To start paging:
Press /FIND HANDSET on the telephone base once
and then release when the telephone is not in use.
All idle system handsets ring and the screens ash
** Paging ** for 60 seconds.
To end paging:
Press /FIND HANDSET on the telephone base once
and then release.
-OR-
Press /FLASH or any of the dialing keys (0-9, TONE
or #) on the handset to stop the paging tone.
•
•
1.
2.
3.
1.
2.
•
•
Ringer muted
10:15 PM 12/25
Do not press and hold /FIND HANDSET for more than four seconds. It may
lead to handset deregistration. If Not registered displays on the handset, refer to
Troubleshooting on page 34 to register the handset to the telephone base.

13
Telephone operation
Multiple handset use (for model CS6120-2 only)
You can use both handsets at the same time on an outside call.
To share an outside call:
When a handset is already on a call and you would like to join the call, press
/FLASH on the other handset to join the call.
To end the call, press OFF/CANCEL or place the handset in the telephone base or charger.
The call continues until all handsets hang up.
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the directory,
call log or redial while you are on a call. Chain dialing can be useful if you wish to
access other numbers (such as bank account numbers or access codes) from the
directory, call log or redial list.
To access a number in the directory while on a call:
Press MENU/SELECT twice to select Directory.
Press CID or to scroll to the desired entry.
Press MENU/SELECT to dial the displayed number.
To access a number in the call log while on a call:
Press MENU/SELECT and then press CID or to select Call log.
Press MENU/SELECT and then press CID or to scroll to the desired entry.
Press MENU/SELECT to dial the displayed number.
To access a number in the redial list while on a call:
Press REDIAL/PAUSE.
Press CID, or REDIAL/PAUSE repeatedly to browse to the desired entry.
Press MENU/SELECT to dial the displayed number.
•
•
1.
2.
3.
1.
2.
3.
1.
2.
3.
You cannot edit a directory entry while on a call. For more details about the
directory, see page 14.
You cannot copy a call log entry into the directory while on a call. For more
details about the call log, see page 18.
You cannot erase a redial entry while on a call. For more details about the
redial memory, see page 14.
Press OFF/CANCEL to exit the directory, call log or redial list when you are on
a call.
•
•
•
•

14
Telephone operation
Redial list
The telephone stores the ve most recently dialed numbers.
When there are already ve entries, the oldest entry is deleted
to make room for the new entry.
Entries are shown in reverse chronological order.
Review and dial from the redial list
Press REDIAL/PAUSE when the handset is not in use.
Press CID, or REDIAL/PAUSE repeatedly until the desired
entry displays.
Press /FLASH to dial.
-OR-
Press /FLASH when the handset is not in use.
Press REDIAL/PAUSE and then press CID, or REDIAL/PAUSE repeatedly
until the desired entry displays.
Press MENU/SELECT to dial.
Delete a redial entry
Press REDIAL/PAUSE when the handset is not in use.
Press CID, or REDIAL/PAUSE repeatedly to browse to the desired entry.
Press MUTE/DELETE to delete the displayed number. You hear a
conrmation tone.
Directory
The directory can store up to 30 entries. Each entry may consist of a phone number
up to 30 digits and a name up to 15 characters.
Each handset directory is independent (for model CS6120-2
only). Any additions, deletions or edits made on one handset
are not reected on the other handset.
When there are no records in the directory, the screen
displays Directory empty.
When the directory is full and you try to save an entry, the
screen displays Directory full.
If you try to save an entry already stored in the directory, the
screen displays Number repeated.
If the telephone number in the directory exceeds 15 digits, a
dash appears after the 14th digit and the remaining digits are
shown after two seconds beginning with a dash.
•
•
1.
2.
3.
1.
2.
3.
1.
2.
3.
•
•
•
•
•
Elizabeth Jones
18001234567890-
Elizabeth Jones
-1234567890123-
Elizabeth Jones
-456
CANCEL
CANCEL

15
Telephone operation
Add a directory entry
Enter the number when the handset is not in use and press MENU/SELECT,
then go to step 3.
-OR-
When the handset is not in use, press MENU/SELECT then
scroll to Directory and press MENU/SELECT twice.
2. When the screen displays Enter number:
Use the dialing keys to enter the number.
Press MUTE/DELETE to backspace and erase a digit.
Press and hold MUTE/DELETE to erase the entire entry.
Press CID or to move the cursor to the left or right.
Press and hold REDIAL/PAUSE to insert a dialing pause
(a Pappears).
-OR-
Copy a number from the redial list by pressing
REDIAL/PAUSE and then press CID, or REDIAL/PAUSE
repeatedly to select a number. Press MENU/SELECT to copy
the number.
Press MENU/SELECT to move to the name. The screen
displays Enter name.
Use the dialing keys to enter the name (up to 15 characters).
Additional key presses show other characters of that
particular key.
Press MUTE/DELETE to backspace and erase a character.
Press and hold MUTE/DELETE to erase the entire entry.
Press CID or to move the cursor to the left or right.
Press MENU/SELECT to conrm. The screen displays Saved and then you hear a
conrmation tone.
1.
•
•
•
•
3.
4.
•
•
•
5.
Enter name
Mike_
Enter number
-
Add contact
Directory
When entering a name in the directory, the rst letter of each word is automatically
capitalized. Press the number key repeatedly until the desired character appears.
•

16
Telephone operation
Review and dial from the directory
Entries are sorted alphabetically.
Press when the handset is not in use. Press CID or
to browse.
When the desired entry displays, press /FLASH to dial.
-OR-
When the handset is not in use, press MENU/SELECT then
scroll to Directory and press MENU/SELECT again.
Press CID or to select Review.
Press MENU/SELECT and then press CID or to browse.
When the desired entry displays, press /FLASH to dial.
Alphabetical search
To start an alphabetical search:
Press when the handset is not in use.
-OR-
When the handset is not in use, press MENU/SELECT then scroll to
Directory and press MENU/SELECT again. Press CID or to select
Review. Press MENU/SELECT again.
Use the dialing keys to enter the letters associated with the name. For example,
if you have entries for Jenny, Jessie, Kristen and Laura in your directory, press
5(JKL) once to see Jenny (when Jenny displays, press CID to see Jessie),
twice to see Kristen, or three times to see Laura. If there is no name entry
matching your search, the next closest match in alphabetical order appears. If
necessary, press CID or to browse.
1.
2.
1.
2.
3.
4.
1.
2.
Mike Smith
800-595-9511
Review