V-tech SN6127 User manual

CareLine™
Quick start guide
SN6127/SN6127-2/SN6187
Register online to get an additional
3-month warranty!
Go to www.vtechphones.com to register your
product for enhanced warranty support and latest
VTech product news.
All manuals and user guides at all-guides.com

For abridged instructions, see the Abridged user’s
manual in the product package. For complete
instructions, see the online Complete user’s manual
at www.vtechphones.com.
Basic installation
Telephone base installation
Handset battery installation
Handset charger installation
Pendant charger installation
Pendant lanyard
Pendant belt clip
Common settings
Set date and time
Set speed dial number for pendant
Common operations
Voice command
Make, answer or end a call
Answering system
Reminders
•
•
•
•
•
•
•
•
•
•
•
•
Basic steps to set up and operate
All manuals and user guides at all-guides.com

1
Telephone base installation
Plug the DSL
filter into the
telephone
wall jack.
Click!
Plug!
Plug!
Click!
i
If you subscribe to telephone service from a cable
company or a VoIP service provider, contact your cable/
VoIP service provider for more information.
All manuals and user guides at all-guides.com

2
Handset battery installation
12
3
Click!
Plug!
All manuals and user guides at all-guides.com

3
Handset charger installation
2
1
Charge for at least
30 minutes before
initial settings.
CMYK=2,64,100,0
Light on!
Plug!
All manuals and user guides at all-guides.com

4
Pendant charger installation
1 2
3
Charge for at
least 30 minutes
before use.
Light on!
CMYK=2,64,100,0
i
If you do not have a pendant (for SN6127/SN6127-2),
you can buy a new pendant (SN6166/SN6167) for your
telephone base. To purchase a pendant, visit our website
at www.vtechphones.com or call 1 [phone].
In Canada, go to www.vtechcanada.com or call
1 [phone].
Read only if you have a pendant.
All manuals and user guides at all-guides.com

5
Pendant lanyard
Pendant belt clip
Click!
Necklet
Press down
to remove the
necklet.
Press down to
adjust the length.
Read only if you have a pendant.
Remove the necklet of the pendant lanyard or the
whole pendant lanyard before you use the pendant
belt clip.
Read only if you have a pendant.
All manuals and user guides at all-guides.com

6
If you subscribe to caller ID
service, the date and time are
set automatically with each
incoming call. You can also set
the date and time manually.
Press MENU >>
Scroll to Set date/time >>
Press SELECT.
Enter the month (MM),
date (DD) and year (YY) >>
Press SELECT.
Enter the hour (HH) and minute (MM) >>
Scroll to AM or PM>> Press SELECT.
1.
2.
3.
Ringers
>Set date/time
SET DATE
MM/DD/YY
Set date and time
All manuals and user guides at all-guides.com

7
Set speed dial number for pendant
Read only if you have a pendant.
We recommend you store two
contacts that you may need
to call them more often or
immediately to speed dial keys
1and 2on the pendant. Use a
handset to set the speed dial
numbers.
Press MENU >>
Scroll to Pendant >>
Press SELECT.
Scroll to Memory 1 or
Memory 2 >> Press SELECT.
Enter the number >>
Press SELECT.
Enter the name >>
Press SELECT.
1.
2.
3.
4.
Set date/time
>Pendant
MEMORY 1 NUMBER
_
MEMORY 1 NAME
_
All manuals and user guides at all-guides.com

8
Read only if you have a pendant.
By saying certain commands to the pendant, you
can hear information such as the date or time, or
call speed dial numbers, or even review call log,
messages or reminders.
Press the VOICE key on either side of the
pendant. After you hear a beep, say your
command to the pendant.
VOICE
Voice command
VOICE
Press
What can I say?
All manuals and user guides at all-guides.com