V-TUF RAPID-VSC Operation instructions

RAPID-VSC
ELECTRIC INDUSTRIAL
MOBILE STAINLESS STEEL
HOT WATER PRESURE WASHER
User Operating Manual
English
Operators
Manual
CE
© V-TUF

3
Contents
Contents Page
Important Safety Instructions 6
General Points & Information 7
Safety Norms & Usage 8-10
Technical Data 11
Identification Data 12
Installation 13
Cold & Hot Water Use 14
Important Advice 16
Transport / Lifting / Storing 17-18
Regulation of Start Electrodes 19
Troubleshooting 20-23
Electric Diagrams 25-27
Functionality 27-28
Pump & Motor Parts Diagram & Parts List 29
Frame Parts Diagram & Parts List 30
Boiler Parts Diagram & Parts List 31-33
Electric Box Parts Diagram & Parts List 34-35
Accessories Parts Diagram & Parts List 36
XHDM150/XHDM160 Pump Parts Diagram & Parts List 37-38

4
This book has important information for the use and safe operation of this machine.
Read and understand all warnings before you start working.
IDENTIFICATION LABEL
Before using this machine, make sure that it is provided with the identification
Label. In case the identification Label is missing, do not use the machine and
consult your dealer immediately.
The Identification Label with the technical specifications is fixed to the Chassis on
the rear of the electrical enclosure inside the cabinet
Check that your mains voltage is the same as shown on the identification label.
WHEN USING THIS MACHINE, PLEASE FOLLOW THESE BASIC PRECAUTIONS
1. Read and understand all the instructions before using the machine.
2. Know how to stop the machine and release pressure quickly, be familiar with all the
controls.
3. The jet must not be directed at persons, animals, live electrical equipment or the appliance
itself.
4. Do not direct the jet against yourself or others in order to clean clothes or foot-wear.
5. Disconnect from the electrical power supply before carrying out user maintenance.
6. High pressure cleaners must not be used by children or untrained personnel.
7. High pressure hoses, fittings and couplings are important for the safety of the appliance. Use
only hoses, fittings and couplings recommended by the V-TUF.
8. Always wear suitable eye, face and body protection.
9. Do not operate the machine when fatigued or under the influence of alcohol or drugs.
10. Keep operating area clear of all persons.
11. Do not overreach or stand on any unstable ground, keep good footing and balance at all
times.
12. Follow the maintenance instructions specified in the manual.
13. Read carefully instructions concerning grounding (Earthing) and extension cables.
14. To prevent fire hazard, do not use with or near inflammable substances such as:
petrol, solvents or thinners.
This manual should be considered a permanent part of the machine and
should remain with it if ownership is transferred.
Save These Instructions in a Safe Place

5
General Points
Instruction Manual
Please check that the manual is in good condition and that all of the pages are clearly legible. Should the
manual be damaged, or missing any pages, please return it immediately to your re-seller who will provide
you with a replacement copy. Alternatively, you can download this document as a pdf from the website at
v-tuf.com and search for this Rapid-VSC Industrial Stainless Hot Water Pressure Washer.
Conservation of the Manual
This manual should be retained for the full working life of the machine. In case of loss or damage, please
request a copy from V-TUF, quoting type of machine, matriculation number and the year of manufacture.
Trial before shipment
The machine has been tested at the manufacturer’s factory to check that all of the components are
functioning correctly according to the machine’s specifications.
Guarantee Terms
The machine is under guarantee according to agreed contractual terms which constitute an integral part of
the order or the rules in force, in all cases, for a maximum period equivalent to twelve (12) months from
the date of dispatch from the factory. The guarantee covers exclusively breakages which could be due to
defective mechanics or assembly. The guarantee does not cover parts subject to wear and tear. The
guarantee is considered forfeit in the following cases:
1. Improper use of the machine, failure to observe the rules of use,
2. Use of non-original parts, those not sold directly by the manufacturer or an authorised re-seller,
3. Modifications made to the machine, or repairs made to the machine by anyone not specifically
authorised by the manufacturer or by the re-seller.
Packaging
The packing materials and any parts replaced during maintenance should be collected and sent to a
specialist waste disposal firm (wood, plastic, metal etc.) and not left within the reach of children or animals.
Delivery
The transport will be carried out by qualified companies, in respect to regulations in force and legislation
relative to weight and length. The merchandise travels under the full responsibility of the transporter and
the user; in the event of an accident, or late delivery, the manufacturer accepts no liability.
Checks
Upon receipt of the goods, check the condition that they are in. Should they appear damaged, avoid any
type of installation and immediately advise the transporter and the supplier.
To ascertain the condition of the parcel, proceed to unpack the goods and check that the delivery is
complete (check the correspondence with the delivery note), ascertain whether the machine has arrived in
generally good condition, free of breakages or dents. In the event of missing or damaged items,
immediately advise the re-seller and / or the manufacturer after having reported these when signing the
transporter’s delivery note.
Personal identifying data
An exact description of the model, serial number and installed accessories will aid a quick and efficient
response on the part of the manufacturer or help centre. Always provide the type, model of machine and its
serial number each time you contact the help centre. To help you remember, we suggest that you place the
relevant machine details in the panel below:
Model
Serial N°
Year of manufacture
Type of pump
Type of motor

6
Prior to use, please carefully read the instructions, paying particular attention to
"IMPORTANT RECOMMENDATIONS", "SECURITY NORMS" and "PRECAUTIONS".
It is forbidden to remove or tamper with the protective parts of the machine.
It is forbidden to use inflammable, explosive or toxic substances.
It is obligatory to use appropriate protective equipment.
It is obligatory to keep the machine clean and in good working order, in particular the controls, the
connections and the technical data panel.
For your safety, and that of those around you, and for the continued working of the machine, do not use
parts other than those prescribed by the constructor.
Before using the high pressure cleaner, always try to ensure that any potential hazardous conditions have
been removed or eliminated from the area of usage.
The high pressure cleaner should be used with clean water. Unfiltered water and/or corrosive chemicals will
cause damage to the machine.
IMPORTANT RECOMMENDATIONS
The ordinary use of this machine does not require particularly specialised training, as long as the user has
sufficient competence and training to carry it out, knowledge of this manual and is aware of general safety
procedures.
Follow the instructions with great care for your safety and that of others, to safeguard your machine and
protect the environment.
SECURITY NORMS
FOUR SYMBOLS TO REMEMBER
Your machine is supplied with
electronic apparatus, the use of
which requires the observation of
the following safety criteria.
When using the machine
outdoors, do not use
when it is raining
Take great care not to
damage the electrical
power supply lead, in case
in spite of taking
precautions the cable is
damaged do not attempt
a precarious repair. A new
cable costs much less
than having to repair the
machine due to an
eventual power fault, let
alone the danger a
defective cable could pose
for people and animals.
Do not attempt any kind
of maintenance whilst the
plug is connected to any
sort of power supply.
Take care not to spray the
machine with the water
jet as this could lead to
short-circuit
Should you need to use
an extension lead with the
power supply, make sure
that the connection
between the extension
General danger
Ranger of severe damage to the machine
Danger to people
Safeguarding the environment

7
lead and the power lead is
secure and stable and
conforms to standard
safety norms. The plug
and the socket should be
waterproof.
Do not use the electric
plug to turn the machine
on or off. Always use the
appropriate switches on
the machine.
Keep the machine out of
reach of children or
unauthorised personnel
and ensure that no-one
else is able to reach the
machine when it is
connected to a live
electric current.
It is strictly forbidden for
the user to operate the
machine in any way in
bare feet.
Do not use the machine if
any of its components are
defective.
Do not use the machine if
there are people in your
way.
Do not direct the water
flow near sources of
electricity.
Do not place your hands
ahead of the lance; high
pressure nozzles can be
extremely dangerous
when used
inappropriately.
If the machine should be
used in service stations,
supply stations or other
potentially dangerous
locations, please ensure
that the appropriate
safety procedures are
observed.
Do not touch the motor,
the chimney the boiler or
other internal parts when
the machine is on, or
immediately after it has
been turned off as you
may risk burning or
scalding.
Should you need to clean
the motor, this procedure
should be carried out in
places where, to
safeguard the
environment, an adequate

8
oil separator is installed.
Re-filling of petrol should
only be undertaken when
the machine is turned off
Do not use combustible
materials other than those
advised by the
constructor.
Once you have finished
working, and after the
machine has stopped,
release the residual
pressure in the tube and
pump by squeezing the
pistol lever.
It is strongly forbidden to
carry out any operation
with the machine if you
are not wearing the
appropriate safety
equipment (protective
glasses, gloves, overalls
etc) as per established
safety norms.
During winter, and in the
event of frost, it is
advisable to use anti-
freeze or to empty out the
water from the internal
circuits by closing the tap
from the water supply and
activating the machine
until all of the water is
expelled.
Should the machine
remain inactive for
extended periods of time,
it is possible that calcium
deposits can form in the
valves which can then
cause problems when
trying to re-start the
machine. Should this
happen, pay particular
attention to any strange
or unexpected noises
emanating from the
machine, in which case
you should consult your
local technical services.
IMPROPER USE
By improper use, we mean using the machine for uses which it was not specifically designed for, such as:
Washing of objects or vehicles which have come into contact with inflammable or noxious dust, gas
or liquids, or substances which can cause dangerous reactions when in contact with water.
Use of the machine in places where there is a danger of explosions, or a significant risk of fire.
Use of the machine for the cleaning of animals, of any size.
Use of the machine by anyone under the age of 16 years.
Use of the machine in the rain or during thunderstorms.
Use of the machine for the washing of any equipment supplied by an electric current.
Use of the machine by anyone unauthorised personnel, or anyone untrained to do so.

9
ERRONEOUS USE
By erroneous use, we mean the use of our machine without respect for the guidelines contained in the
instruction and maintenance manual. Lack of respect for these guidelines can represent a risk of injury to
both the operator and those persons nearby as well as a risk of serious damage to the machine itself.
Erroneous use, therefore, can constitute: unsecured connections (including those of accessories supplied as
optional extras), not using original spare parts, repairs undertaken by unauthorised or unqualified
personnel, use of the machine for purposes it was not designed for (see improper use), lack of proper
maintenance and use of the electrical power supply cable or the high pressure tube to drag or haul the
machine around.
USAGE IN ENCLOSED AREAS
Where the machine is to be used in an enclosed area, you should attach the chimney adaptor, our order
code VTRPS5000030.
ATTENTION:
The diameter (z) of the chimney
(2) must not be less than that of
the adaptor (1). It is advised to
take steps to install a chimney to
expel the machine fumes, as
shown in the diagram.
Usage in areas subject to winds or strong air currents
ATTENTION:
Where the machine is to be used in areas subject to wind or strong air currents, you should attach the
chimney adaptor, our order code VTRPS5000030. This simple precaution will help avoid serious damage to
the machine.
This simple precaution will help avoid serious damage to the machine.
PRECAUTIONS
Before activating the high pressure cleaner, make certain that the water supply is correct (min. 1 Bar –Max
8 Bar); dry use can provoke serious damage to the machine’s waterproofing systems.
To safeguard the security of the operator and of the machine, avoid making modifications to the machine
without the written consent of the manufacturer.
If you notice any damage to the machine, refrain from any and all work with the machine, and immediately
inform the re-seller or an authorised technician.
During use, avoid covering the machine: if you consider it necessary to protect the machine, do it in such a
way as to allow air to circulate freely in order to cool the motor.
In the event of a long pause / break during work / using the machine (more than 15 minutes), turn off the
machine and release the residual pressure.
The maintenance of this machine requires the use of a qualified person who, as well as having knowledge of
this instruction manual, should be equally familiar with general safety guidelines as well as those measures
specific to this machine.

10
For matters of repair, maintenance and tuning, we always recommend that you refer to a re-seller or
authorised technician.
ATTENTION:
Never under-estimate these warnings, use of the machine in an inappropriate manner, can lead to serious
damage and injury to the operator and any surrounding personal. Don’t take risks!
ATTENTION:
The manufacturer cannot be held responsible for any eventual damage or injury to people, animals or
property resulting from improper or unreasonable use, or usage in any way not conforming to the
instructions contained in this manual.
TECHNICAL DATA:
Industrial Specification -VSC
Rapid Mobile Model: VSC240V VSC415V
Water Flow(Litres per minute): 10 10
Pressure (Bar/Psi) 100 150
Motor Power (HP @ 1400rpm) 3 4
Chemical Feature L.Press. L.Press.
Run System Protection Auto Stop/Start with 1 hour shut down
Water Temperature 0-150˚C 0-150˚C
Power supply (Voltage) 240v 415v
Weight 110kg 110kg
Dimensions (L x W x H) cm 100 x 67 x 72cm 100 x 67 x 72cm

11
IDENTIFICATION DATA
The position of the identification data of the machine
1) Identification of the machine according to EU directives.
ATTENTION:
Check that your RAPID-VSC high pressure washer has been provided with these identification details, if they
have not been provided please inform your local dealer immediately.
Machines which have not been provided with these details MUST NOT BE USED, and should be considered
anonymous and potentially dangerous.
It is obligatory that you ensure that the data label is always attached to the machine and clearly legible.
In case of damage, loss or illegibility, you should submit a written request to the manufacturer who will
then provide you with a new one.