V-ZUG Supremo HSL User manual

Operating instructions
Supremo HSL/XSL
Automatic coffee maker

2
B
C
C7
C6
C1
C3
C2
C5
C4
B2 B3 B4 B5 B6 B7 B8 B9 B10
B1
A
A1A2
A3 A4 A5
A12
A13
A18
A20
A14
A17
A16
A15
A19
A21
A22
A23
A8 A10A7 A6
A9
A11
A24

3
2
1
1 4
56
78
9101112
13 14 16
2
15
3

4
2
1
17 18
22
19 20
24
27
21
28
25 26
23
30 31 3229

EN
DE
FR
IT
NL
RU
UK
TR
⾈䛢

5
EN
Please follow the safety precautions.
Modifications
Text, diagrams and data correspond to the technical standard of the appliance
at the time these operating instructions went to press. The right to make techni-
cal modifications for the purpose of the further development of the appliance is
reserved.
Validity
The product family (model number) corresponds to the first alphanumerics on
the identification plate. These operating instructions apply to:
Type Product family Size system
CCSHSL 25001 55-381
CCSHSL60 25002 60-381
CCSXSL60 25003 60-450
Variations depending on the model are noted in the text.
© V-ZUG Ltd, CH-6301 Zug, 2015
Thank you for choosing to buy one of our products. Your appliance is made to
high standards and is easy to use. Nevertheless, please take the time to read
these operating instructions in order to familiarize yourself with the appliance
and get the best use out of it.

6
CONTENTS
INTRODUCTION .....................................................................7
Symbols used in these instructions................................7
Letters in brackets..........................................................7
Troubleshooting and repairs ..........................................7
SAFETY ..................................................................................7
Fundamental safety warnings........................................7
Designated use ..............................................................8
Instructions....................................................................8
DESCRIPTION.........................................................................8
Description of the appliance ..........................................8
Description of the control panel.....................................8
Description of milk container and accessories................9
PRELIMINARY CHECKS ..........................................................9
Checking the appliance..................................................9
Installing the appliance .................................................9
Connecting the appliance ..............................................9
DISPOSAL ..............................................................................9
BUILTIN INSTALLATION........................................................9
USINGTHE APPLIANCE FORTHE FIRSTTIME.......................12
TURNING ON AND HEATING UP...........................................12
MAKING COFFEE USING COFFEE BEANS..............................12
CHANGINGTHE QUANTITY OF COFFEE INTHE CUP .............13
Programming quantity ................................................13
ADJUSTINGTHE COFFEE MILL .............................................13
MAKING ESPRESSO COFFEEWITH PREGROUNDED COFFEE
INSTEAD OF BEANS ..........................................................13
DELIVERING HOTWATER .....................................................14
CHANGINGTHE QUANTITY OF HOTWATER..........................14
MAKING CAPPUCCINO ........................................................14
MAKING FROTHED MILK......................................................15
CHANGINGTHE QUANTITY OF MILK AND COFFEE FOR
CAPPUCCINO .......................................................................15
MAKING LATTE MACCHIATO OR CAFFE LATTE .....................15
CHANGINGTHE QUANTITY OF COFFEE AND MILK FOR LATTE
MACCHIATO/CAFFE LATTE...................................................15
CLEANING............................................................................15
Cleaning the machine..................................................15
Cleaning the grounds container...................................15
Cleaning the drip tray ..................................................16
Cleaning the water tank...............................................16
Cleaning the spouts .....................................................16
Cleaning the pre-ground coee funnel........................16
Cleaning the inside of the coee machine ...................16
Cleaning the infuser.....................................................16
Cleaning the milk container.........................................17
MENU SETTINGS..................................................................17
Rinsing.........................................................................17
Set language................................................................17
Energy saving...............................................................18
Set time .......................................................................18
Auto start.....................................................................18
Auto o (Standby) .......................................................18
Set temperature...........................................................18
Water hardness............................................................19
Contrast .......................................................................18
Statistics ......................................................................19
Default values..............................................................19
Descaling .....................................................................19
TURNINGTHE APPLIANCE OFF............................................20
TECHNICAL DATA.................................................................20
DISPLAYED MESSAGES........................................................21
TROUBLESHOOTING ............................................................22
SERVICE & SUPPORT............................................................23

7
EN
INTRODUCTION
Symbols used in these instructions
Important warnings are identied by these symbols.
Failure to observe the instructions could result in electric shock,
serious injury, burns, re or damage to the appliance.
Danger!
Failuretoobservethe warningcould resultin possibly life threat-
ening injury from electric shock.
Important!
Failure to observe the warning could result in injury or damage
to the appliance.
Danger of burns!
Failure to observe the warning could result in scalds or burns.
Please note:
This symbol identies important advice or information for the
user.
Letters in brackets
The letters in brackets refer to the legend in the Description of
the Appliance on page 3.
Troubleshooting and repairs
In the event of problems, follow the information given in the
sections“Displayed messages”and“Troubleshooting”.
If this does not resolve the problem, you should consult Custom-
er Services. For repairs, contact Customer Services only.
SAFETY
Fundamental safety warnings
The appliance is not intended for use by per-
sons (including children) with reduced phys-
ical, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
Cleaning and user maintenance shall not be
made by children without supervision.
Never immerse the appliance in water.
This is an household appliance only. It is not
intended to be used in: sta kitchen areas in
shops, oces and other working environ-
ments; farm houses; by clients in hotels, mo-
telsandotherresidentialtypeenvironments;
bed and breakfast type environments.
If the plug or power cable is damaged, it
must be replaced by customer services only
to avoid all risk.
FOR EUROPEAN MARKETS ONLY:
This appliance can be used by children aged
from 8 years and above if they have been
given supervision or instruction concerning
use of the appliance in a safe way and if they
understand the hazard involved. Cleaning
and user maintenance shall not be made
by children unless they are older than 8 and
supervised. Keep the appliance and its cord
out of the reach of children aged less than
8 years.
Appliances can be used by persons with re-
duced physical, sensory or mental capabili-
ties or lack of experience and knowledge if
they have been given supervision or instruc-
tion concerning use of the appliance in a safe
way and understand the hazards involved.
Children shall not play with the appliance.
When not in use and before cleaning, always
unplug the appliance.
Surfaces marked with this symbol be-
come hot during use (the symbol is present
in certain models only).

8
Danger! This is an electrical appliance, it is therefore
important to respect the following safety warnings:
• Never touch the appliance with damp hands.
• Never touch the plug with damp hands.
• Make sure the socket used is freely accessible at all times,
enabling the appliance to be unplugged when necessary.
• Unplug directly from the plug only.
Never pull the power cable as you could damage it.
• To disconnect the appliance completely, place the main
switch (A23) on the side of the appliance in the 0 position.
• If the appliance is faulty, do not attempt to repair.
Turn it o using the main switch (A23), unplug from the
mains socket and contact Customer Services.
Important! Keep all packaging (plastic bags, polysty-
rene foam) away from children.
Danger of burns! This appliance produces hot water
and steam may form while it is in operation.
Avoid contact with splashes of water or hot steam. Use knobs
and handles.
Important! Do not hold on to the coee machine
when it is out of the cabinet.
Do not rest recipients containing liquids or inammable or cor-
rosive materials on top of the appliance. Place the accessories
required to make the coee (the measure for example) in the
special holder. Do not rest large objects which could obstruct
movement or unstable objects on the appliance.
Important! Do not use the appliance when extracted.
Make sure the appliance is inactive before extracting it. The only
exception is adjusting the coee mill which must be done with
the machine extracted (see section“Adjusting the coee mill”).
Pleasenote: Useoriginal or manufacturerrecommend-
ed accessories and spare parts only.
Designated use
This appliance is designed and made to prepare coee and heat
drinks. All other use is considered improper.
This appliance is not suitable for commercial use.
Themanufacturerisnot liable for damage derivingfromimprop-
er use of the appliance.
This appliance can be installed over a built-in oven if the latter
is tted with a cooling fan at the rear (maximum microwave
power: 3 kW).
Instructions
Read these instructions carefully before using the appliance.
• Keep these instructions.
• Failure to respect these instructions may result in burns or
damage to the appliance.
The manufacturer is not liable for damage deriving from
failure to respect these instructions.
Please note: The appliance has a cooling fan.
This comes on whenever coee, steam or hot water is delivered.
After several minutes, the fan goes o automatically.
Important! Never turn o the machine during desca-
ling.
DESCRIPTION
Description of the appliance
(page 2 - A)
A1. Cup tray
A2. Service door
A3. Coee guide
A4. Waste coee container
A5. Infuser
A6. Cup tray lights
A7. On/stand-by button
A8. Control panel
A9. Tray
A10. Hot water and steam nozzle
A11. IEC connector
A12. Water tank
A13. Coee spout (adjustable height)
A14. Drip tray
A15. Bean container lid
A16. Bean container
A17. Grinding adjustment dial
A18. Pre-ground coee funnel door
A19. Measure
A20. Measure compartment
A21. Pre-ground coee funnel
A22. Power cable
A23. Main switch
A24. Safety grid
Description of the control panel
(page 2 - B)
B1. Display: guides the user in using the appliance.
B2. icon to select the coee taste
B3. icon to select the type of coee (espresso, coee,
long coee)

9
EN
B4. icon to make one cup of coee and conrm the select-
ed function
B5. icon to make two cups of coee and scroll back-
wards through the menu to display the various modes
B6. icon to deliver hot water and scroll forwards through
the menu to display the various modes
B7. icon to enable or disable menu parameter setting
mode and exit from the chosen mode
B8. icon to make cappuccino / frothed milk
B9. icon to make latte macchiato / frothed milk
B10. icon to make cae latte / frothed milk (hot milk)
Description of milk container and accessories
(page 2 - C)
C1. Froth regulator
C2. Milk container handle
C3. CLEAN button
C4. Milk intake tube
C5. Frothed milk spout
C6. Milk frother
C7. Hot water spout
PRELIMINARY CHECKS
Checking the appliance
After removing the packaging, make sure the product is com-
plete and undamaged and that all accessories are present.
Do not use the appliance if it is visibly damaged.
Contact Customer Services.
Installing the appliance
Important!
• Installation must be performed by a qualied professional
in compliance with legislation in force in the country of in-
stallation (see section“Built-in installation”).
• The packing elements (plastic bags, polystyrene foam, etc.)
should be kept out of reach of children.
• Neverinstall theappliancein roomswherethe temperature
may drop to 0°C or lower.
• Customise the water hardness as soon as possible following
the instructions in the“Water hardness”section.
Connecting the appliance
Danger! Check that the mains power supply voltage
corresponds to the value indicated on the rating plate on the
bottom of the appliance.
Connect the appliance to an eciently earthed and correctly in-
stalled socket with a minimum current rating of 10A only.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualied pro-
fessional.
To comply with safety directives, an omnipolar switch with a
minimum contact distance of 3 mm must be installed.
Do not use multiple sockets or extensions.
Important! Safety cutout devices must be included
in the mains power supply in compliance with the installation
regulations in the country concerned.
DISPOSAL
In compliance with European directive 2002/96/
EC, the appliance must not be disposed of with
household waste, but taken to an authorised
waste separation and recycling centre.
BUILTIN INSTALLATION
Verify the minimum measurements required for correct installa-
tion of the appliance.
The coee machine must be installed in a column and the col-
umn must be rmly xed to the wall with commercially avail-
able brackets.
Important!
• Important: all installation or maintenance operations must
be performed with the appliance disconnected from the
mains electricity supply.
• Kitchen furniture in direct contact with the appliance must
be heat resistant (65°C min).
• To guarantee correct ventilation, leave a gap at the bottom
of the cabinet (see measurements in gure).
361 mm
528 mm
372 mm
82 mm
30 mm

10
H 454 MM
454 mm
594 mm
20 mm
412 mm
45 mm
45 mm
45 mm
45 mm
450 + 2 mm
850 mm Min
500 mm
545 mm Min.
200 cm2
560 + 8 mm
H 378 MM
378 mm
594 mm
20 mm
412 mm
45 mm
45 mm
45 mm
45 mm
374 + 2 mm
850 mm Min
500 mm
545 mm Min.
200 cm2
560 + 8 mm

11
EN
H 375 MM
375 mm
544 mm
20 mm
412 mm
45 mm
45 mm
45 mm
45 mm
381 + 2 mm
850 mm Min
500 mm
545 mm Min.
200 cm2
550 + 8 mm
x 16 x 2
Position the rails on the sides of the cabinet as shown in the g-
ure. Fix with the screws provided, then extract them completely.
If the coee machine is installed over a warmer drawer, use the
top surface of this as a reference to position the rails.
In this case, there will be no surface to rest the rails on.
approx.
350 mm
x 1
Fix the power cable with the clip.
The power cable must be long enough to allow the appliance to
be extracted from the cabinet to ll the coee bean container.
The appliance must be earthed in compliance with legislation.
Electrical connections must be performed by a qualied electri-
cian following the instructions.
x 4 x 8
Position the appliance on the rails, making sure the pins are
correctly inserted in the housings, then x it with the screws
supplied.
If the height of the appliance requires adjusting, use the spacer
disks provided.
x 4
550/560 + 1 mm
If necessary, correct alignment of the appliance by positioning
the spacers supplied under or at the sides of the support.

12
USING THE APPLIANCE FOR THE FIRST TIME
• Coee has been used to factory test the appliance and it is
therefore completely normal for there to be traces of coee
in the mill.
• Customise water hardness as soon as possible following
the instructions in the“Water hardness”section.
1. Connect the appliance to the mains electricity supply and
place the main switch (A23) in position I.
2. The appliance displays“FILL TANK”in dierent languages.
Extractthe watertank (g.4), rinse and llwithfreshwater
without exceeding the MAX line. Replace and push as far as
it will go.
3. Choose the language (the languages scroll through at in-
tervals of about 3 seconds):
When the message “PRESS TO SET TO ENGLISH”is dis-
played, press the icon (B4) (g. 3) for 3 seconds until
“ENGLISH SET”is displayed. If you set the wrong language,
follow the instructions in the “Setting the language” sec-
tion.
If your language is not available, select one from those dis-
played (the instructions refer to English).
Then follow the instructions displayed:
4. Place a cup under the hot water spout (g. 5).
(If the hot water spout is not inserted, the appliance dis-
plays “INSERT WATER SPOUT”. Attach the spout as shown
in gure 6. The machine displays “HOT WATER PRESS ”.
Press the icon (B4), a little water comes out of the
spout.
5. After that the machine displays “TURNING OFF PLEASE
WAIT”and goes o.
6. Extract the appliance by pulling it out using the handles
(g. 7).
Open the lid and ll the container with coee beans, then
close the lid and push the appliance in.
The coee machine is now ready for normal use.
Important! Never introduce pre-ground coee,
freeze dried coee, caramelised beans or anything else which
could damage the appliance.
Please note: When using the appliance for the rst
time, you need to make 4-5 cups of coee and 4-5 cappuccinos
before the appliance gives satisfactory results.
Please note: Each time you turn the coee machine
on by the main switch (A23), it performs an AUTO DIAGNOSTICS
cycle and then goes o.
To turn it on again, press the ON/stand-by button (A7) (g. 1)
TURNING ON AND HEATING UP
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted.
The appliance is ready for use only after completion of this cycle.
Danger of burns! During rinsing, a little hot water
ows from the coee spouts.
To turn the appliance on, press the ON/stand-by button (A7) (g.
1).The message“HEATING UP PLEASE WAIT”is displayed.
When heating is complete, the message changes to“RINSING”.
The appliance is at temperature when the message “COFFEE
STANDARD”is displayed.
MAKING COFFEE USING COFFEE BEANS
1. The appliance is preset to make coee with a standard
taste. You can choose coee with an extra mild, mild,
standard, strong or extra strong taste. There is also a pre-
ground coee option. To choose the required taste, press
the icon (B2) (g. 8) a number of times. The required
coee taste is displayed.
2. Place 1 cup under the spouts to make 1 coee (g. 9) or 2
cups for 2 coees (g. 9).
Lower the spouts as near as possible to the cup for a cream-
ier coee (g. 10).
3. Press the icon (B3) (g. 11) to select the type of
coee (espresso, coee, long coee).
Now press the icon (B4) (g. 12) if you want to make
one coee and the icon (B5) (g. 13) if you want to
make 2 coees. The appliance now grinds the beans and
starts delivering the coee into the cup.
Once the set amount of coee has been delivered, the ma-
chine stops delivery automatically and expels the exhaust-
ed coee grounds into the grounds container.
4. After a few seconds, the appliance is ready for use again.
5. To turn the appliance o, press the ON/stand-by button
(A7) (g. 1).
(Before going o, the appliance performs an automatic
rinse cycle.Take care to avoid scalds).
NOTE 1: If the coee is delivered a drop at a time or not at all, see
section“Adjusting the coee mill”.
NOTE 2: If the coee is delivered too fast and the cream is not
satisfactory, see section“Adjusting the coee mill”.
NOTE 3: Tips for a hotter coee:
• Proceed as described in the section “Menu settings”, “rins-
ing”function.
• Unless preheated, do not use excessively thick cups as they
will absorb too much heat.
• Preheat the cups by rinsing them with hot water.

13
EN
NOTE 4: Coee delivery can be interrupted at any moment by
re-pressing the previously selected icon which remains lit during
the operation.
NOTE 5: As soon as delivery is nished, to increase the quantity of
coee in the cup, just keep pressing the previously selected icon
within 3 seconds after delivery has nished.
NOTE 6: When the appliance displays “FILL TANK”, ll the tank
with water or the appliance will not deliver coee. (It is normal
for there to be a little water left in the tank).
NOTE 7: After about 14 single (or 7 double) coees, the appliance
displays“EMPTY GROUNDS CONTAINER”.
Even if not full, the empty waste coee container message is dis-
played 72 hours after the rst coee has been delivered.
For the 72 hours to be calculated correctly, the machine must
never be turned o with the main switch in the 0 position.
To clean, open the service door on the front of the appliance
by pulling the spout (g. 16), extract the drip tray (g. 17) and
clean.
When cleaning, always extract the drip tray completely.
Important! When extracting the drip tray, the
grounds container MUST always be emptied.
If this is not done, the machine may be clogged.
NOTE 8: Never extract the water tank while the machine is de-
livering coee.
If it is removed, it will not be possible to make the coee and the
appliance will display some messages (see page 21).
CHANGING THE QUANTITY OF COFFEE IN THE CUP
The appliance is set by default to make a standard quantity of
coee.
To select the quantity of coee, press the icon (B3) (g.
11) repeatedly until the message corresponding to the required
quantity of coee is displayed:
Corresponding coee quantity (ml)
ESPRESSO ถ30
COFFEE ถ110
LONG COFFEE ถ150
Programming quantity
To modify the quantity of coee delivered, proceed as follows:
1. Place a cup under the coee spouts ( g. 9).
2. Keep the icon (B4) (g. 12) pressed until the message
“PROGRAM QUANTITY”is displayed and coee delivery be-
gins.Then release the icon.
3. As soon as the coee in the cup reaches the required level,
press the same icon again.
The quantity set has now been programmed.
ADJUSTING THE COFFEE MILL
The coee mill is preset in the factory and should not require
adjusting.
However, if after making the rst few coees you nd that de-
livery is either too fast or too slow (a drop at a time), this can
be corrected by adjusting the grinding adjustment dial (g. 14).
Important! The grinding adjustment dial must only
be turned when the coee mill is in operation.
For slower delivery and creamier coee, turn one click anticlock-
wise (ner pre-ground coee).
For faster delivery (not a drop at a time), turn one click clockwise
(coarser pre-ground coee).
MAKING ESPRESSO COFFEE WITH PREGROUND
COFFEE INSTEAD OF BEANS
• Press the icon (B2) (g. 8) and select the pre-ground
coee function.
• Extract the machine by pulling it outwards using the han-
dles (g. 7).
• Lift the central lid, place one measure of pre-ground coee
in the funnel (g. 19), push the appliance in then proceed

14
as described in the section“Making coee using coee beans”.
Please note: You can make just one coee at a time by
pressing the icon (B4) (g. 12).
• After using the machine with pre-ground coee, to go back
to making coee using beans, disable the pre-ground cof-
fee function by pressing the icon (B2) (g. 8) again.
NOTE 1: Never introduce pre-ground coee when the machine is
o or it could spread through the inside of the appliance.
NOTE 2: Never add more than 1 measure, otherwise the appli-
ance will not make the coee.
NOTE 3: Use the measure provided only.
NOTE 4: Introduce only pre-ground coee for espresso coee
machines into the funnel.
NOTE 5: If more than one measure of pre-ground coee is used
and the funnel clogs, push the coee down with a knife (g. 21)
then remove and clean the infuser and machine as described in
the“Cleaning the infuser”chapter.
DELIVERING HOT WATER
• Make sure the water spout is in place (g. 6).
• Position a container under the spout.
• Press the icon (B6) (g. 20).
The message“HOT WATER”is displayed and hot water ows
out of the hot water spout into the container below.
You should not deliver hot water for more than 2 minutes at
a time.
To interrupt the ow, press the icon (B6).
The appliance stops delivery once the set quantity is
reached.
CHANGING THE QUANTITY OF HOT WATER
The appliance is set by default to automatically deliver approx
300 ml.
To modify these quantities, proceed as follows:
1. Position a container under the spout.
2. Press the icon (B6) again until“HOT WATER PROGRAM
QUANTITY”is displayed, then release the icon (B6).
3. When the hot water in the cup reaches the required level,
press the icon (B6) again.
The machine is now reprogrammed with the new quantity.
MAKING CAPPUCCINO
• Select the taste of the coee you want to use to make the
cappuccino by pressing the icon (B2).
• Remove the lid of the milk container.
• Fill the container with about 100 ml of milk for each cap-
puccino to be prepared (g. 23).
Never exceed the MAX level (corresponding to about 750
ml) marked on the container.
You should ideally use skimmed or semi-skimmed milk at
refrigerator temperature (about 5°C).
• Make sure the intake tube is correctly inserted in the rubber
washer (g. 24) then replace the milk container lid.
Position the froth regulator between the words cappuccino
and cae latte printed on the milk container lid.
The quality of froth can be adjusted by moving the regu-
lator towards the word “cae latte” for a denser froth (hot
milk). Moving it towards the word “cappuccino” obtains a
less dense froth.
no froth (hot milk)
«Denser» froth
froth regulator
«Less dense» froth
• Remove the hot water spout (g 6) and attach the milk
container to the nozzle (g. 25).
• Position the milk tube as shown in g. 26 and then place a
suciently large cup under the coee and milk spouts.
• Press the icon (B8).“CAPPUCCINO”is displayed and af-
ter a few seconds, frothed milk ows out of the milk spout
into the cup below. (Delivery stops automatically).
• The appliance delivers coee.
• The cappuccino is now ready. Sweeten to taste and, if de-
sired, sprinkle the froth with a little cocoa powder.
NOTE 1: While making cappuccino, the ow of frothed milk or
coee can be interrupted by pressing the icon (B8).
NOTE 2: If the milk in the container nishes while delivering
frothed milk, remove the container and add milk.
Reattach and press the icon (B8) to request a cappuccino
again.
NOTE 3: To ensure the complete cleanliness and hygiene of the
milk frother, always clean the circuits in the milk container lid
after making cappuccino. “PRESS CLEAN”ashes on the display.
• Place a recipient under the milk spout (g. 26).
• Press the CLEAN button on the lid (C3) and hold down for at
least 5 seconds (g. 26) to start the cleaning function.
The appliance displays the message “CLEANING UNDER
WAY” above a progress bar. You should not release the
CLEAN button until the bar is complete indicating that
cleaning is concluded.When the CLEAN button is released,
the function stops. After cleaning, remove the milk contain-
er and place in the refrigerator. The milk should not be left
out of the refrigerator for more than 15 minutes.

15
EN
NOTE 4: To change the quantity of coee or frothed milk the ap-
pliance delivers automatically into the cup, proceed as described
in the section“Changing the quantity of milk and coee for cap-
puccino”.
MAKING FROTHED MILK /HOT MILK
• Prepare the appliance as described to make cappuccino.
• Fill the container with about 100 ml of milk for each frothed
milk or 300 ml of milk for each hot milk to be prepared (g.
23).
• Before attaching the milk container to the nozzle, position
the froth regulator between the words CAPPUCCINO and
CAFFE LATTE printed on the milk container lid.
• If the froth is not satisfactory, move the regulator slightly
until you obtain the required froth.
Select the frothed milk function by pressing either
(B8) or (B9) (g. 18) twice.
Select the hot milk function by pressing (B10) (g. 32)
twice.
The quality of frothed milk delivered is equal to that of the
selected drink (cappuccino: less dense froth, latte mac-
chiato: denser froth and cae latte: no froth/hot milk).The
quantity of frothed milk cannot be set directly.
CHANGING THE QUANTITY OF MILK AND COFFEE
FOR CAPPUCCINO
The appliance is set by default to automatically deliver standard
quantities of coee or milk.
To change these quantities, proceed as follows:
1. Prepare the appliance as described to make cappuccino.
2. Place a cup under the coee spouts and milk spout.
3. Hold the icon (B8) until the message“MILK FOR CAP
PUCCINO PROGRAM QUANTITY”isdisplayed.
4. Release the icon. The appliance starts delivering milk.
5. Once the required quantity of milk has been delivered into
the cup, press the icon (B8) again.
6. After a few seconds, the appliance starts delivering coee
into the cup and the message “COFFEE F. CAPPUCCINO
PROGRAM QUANTITY”is displayed.
7. Once the required quantity of coee has been delivered
into the cup, press the icon (B8) again. Coee deliv-
ery stops.
The machine is now reprogrammed with the new milk and cof-
fee quantities.
MAKING LATTE MACCHIATO OR CAFFE LATTE
• Prepare the appliance as described to make cappuccino.
• Fill the container with about 100 ml of milk for each LATTE
MACCHIATO or 300 ml of milk for each CAFFE LATTE to be
prepared (g. 23).
• Before attaching the milk container to the nozzle, position
the froth regulator between the words CAPPUCCINO and
CAFFE LATTE printed on the milk container lid.
If the froth is not satisfactory, move the regulator slightly
until you obtain the required froth.
• Press the icon (B9) to request a latte macchiato.
or
• Press the icon (B10) to request a cae latte and after
a few seconds, frothed milk ows out of the milk spout into
the cup below. (Delivery stops automatically). Milk delivery
stops and the appliance starts delivering coee.
CHANGING THE QUANTITY OF COFFEE AND MILK
FOR LATTE MACCHIATO/CAFFE LATTE
The appliance is set by default to deliver standard quantities of
coee or milk.
To change these quantities, proceed as follows:
1. Prepare the appliance as described to make latte macchiato
or cae latte.
2. Place a glass (or big cup) under the coee spouts and milk
spout.
3. Press the icon corresponding to the preparation you want
to modify, latte macchiato (B9) or cae latte (B10)
for at least 8 seconds until the appliance displays“MILK FOR
MACCHIATO PROGRAM QUANTITY” or “MILK FOR CAFFE
LATTE PROGRAM QUANTITY”
4. Then release the icon.The appliance starts delivering milk.
5. Once the required quantity of milk has been delivered,
press the icon selected previously. Milk delivery stops and
the quantity is memorised.
6. After a few seconds, the appliance delivers coee into
the cup and displays “COFFEE FOR MACCHIATO PROGRAM
QUANTITY”or “COFFEE FOR CAFFE LATTE PROGRAM QUAN-
TITY”.
7. Once the required quantity of coee has been delivered,
press the icon selected previously. Coee delivery stops and
the quantity is memorised.
CLEANING
Cleaning the machine
Do not use solvents or abrasive detergents to clean the coee
machine. A soft damp cloth will suce.
NEVER wash any of the components of the coee machine in the
dishwasher.
The following parts of the machine must be cleaned regularly:
• coee grounds container (A4),
• drip tray (A14),

16
• water tank (A12),
• coee spouts (A13),
• pre-ground coee funnel (A21),
• inside of the machine, accessible after opening the service
door (A2),
• infuser (A5).
Cleaning the coee grounds container
When “EMPTY GROUNDS CONTAINER” is displayed, the grounds
container must be emptied and cleaned.
To clean:
• open the service door on the front of the appliance (g. 16),
extract the drip tray (g. 17) and clean.
• Clean the grounds container thoroughly.
Important! When extracting the drip tray, the
grounds container must always be emptied.
Cleaning the drip tray
Important! If the drip tray is not emptied the water
might overow.
This could damage the machine.
The drip tray is tted with a level indicator (red) showing the
level of water it contains (g. 28).
Before the indicator protrudes from the cup tray, the drip tray
must be emptied and cleaned.
To remove the tray:
1. Open the service door (g. 16).
2. Remove the drip tray and the grounds container (g. 17).
3. Empty the drip tray and grounds container (A4) and wash
them.
4. Replace the drip tray complete with grounds container
(A4).
5. Close the service door.
Cleaning the water tank
1. Clean the water tank (A12) regularly (about once a month)
with a damp cloth and a little mild washing up liquid.
2. Remove all traces of washing up liquid.
Cleaning the spouts
1. Clean the nozzles periodically using a sponge (g. 29).
2. Check regularly that the holes in the coee spout are not
blocked. If necessary, remove coee deposits with a tooth-
pick (g. 27).
Cleaning the pre-ground coee funnel
Checkregularly(aboutoncea month) thatthe pre-groundcoee
funnel is not blocked (g. 21).
Danger! Before performing any cleaning operations,
the machine must be turned o by pressing the main switch
(A23) and unplugged from the mains power supply.
Never immerse the coee machine in water.
Cleaning the inside of the coee machine
1. Check regularly (about once a week) that the inside of the
appliance is not dirty.
If necessary, remove coee deposits with a sponge.
2. Remove the residues with a vacuum cleaner (g. 30).
Cleaning the infuser
The infuser must be cleaned at least once a month.
Important! The infuser (A5) must not be removed
when the appliance is on.
Do not use force to remove the infuser.
1. Make sure the machine is correctly turned o (see“Turning
o”).
2. Open the service door (g. 16).
3. Remove the drip tray and grounds container (g. 17).
4. Press the two yellow release buttons inwards and at the
same time pull the infuser outwards (g. 31).
Important! Do not use washing up liquid to clean the
infuser. It would remove the lubricant applied to the inside of
the piston.
5. Soak the infuser in water for about 5 minutes, then rinse.
6. After cleaning, replace the infuser (A5) by sliding it onto the
internalsupport and pinatthebottom,thenpushthe PUSH
symbol fully in until it clicks into place.