Vac-Rac LOC RAC User manual

www.vac-rac.com
[e-mail]
LOC RAC –INSTRUCTIONS

2
Please read and follow carefully.
-Insert threaded ends of “T”s in bases and tighten.
-Insert levers into bases.
-Make sure levers are in the OFF position.
-Ensure bases and vehicles are clean.
-Press rack with double elastics on flat area of hood/bonnet on passenger
side.
Operate lever and remove it.
-Place the other rack on a flat area of roof or windshield.
-Attach rods with reels forward and loop elastics over bar ends.
-Elastic tension can be adjusted using the teeth under the bar.
-Check for security by pulling on the base, not the “T”.
-Remove rods by inserting a finger in bar recess and sliding elastics over the
end.
-To remove racks from vehicle, undo lever and pull the tab to break the
vacuum.
IMPORTANT NOTES
-When not in use, fit the protective covers and keep the levers in the OFF
position.
-Loc Racs are designed for fishing rods only and should be removed after
use.
-Not for use on ice covered vehicles. Wet vehicles –wipe off excess water.
-Cars parked under trees, long term, can build up aphid deposits.
-Protect your rods by not driving at high speed.
-Keep one key as spare –it can be fitted to a key ring. Put some bright
string on the other key.
-If you accidentally deform the bases, put them on a smooth clean surface
with the levers in UP/OFF position. (They will gradually return to their
shape at room temperature).