Valcom PagePac V-5335300 User manual

Issue 2
1947183
TRUNK ADAPTER
V-5335300
by
PagePac®
INTRODUCTION
The Trunk Adapter interfaces a loop-start trunk
port, key system line port, or stand alone tele-
phone set to page controls that do not provide a
trunk port access input.
Power Requirements
• -24VDC @ 37mA
Dimensions/Weight
• 4.0”W x 2.0”H x 1.0”D
(10.2cm x 5.1cm x 2.5cm)
• 2.0 lbs (0.9 kg)
INSTALLATION
CONNECTIONS
Trunk Adapter connections are shown in Figure 1.
Refer to the manuals supplied with each paging
system for more information. Table 1 lists the
Trunk Adapter/AmpliCenter connections.
CAUTION:
Do not connect a Trunk Adapter manufactured
before July 1988to an Amplicenter. Doing so may
damage the Trunk Adapter. See the Trunk
Adapter front panel for the date of manufacture.
TECHNICAL ASSISTANCE
When calling, have a VOM and a telephone test
set available and call from the job site. Call (540)
427-3900 and ask for PagePac Technical Sup-
port, or call [phone] for Valcom 24-hour
Automated Support or visit our websites at
http://www.pagepac.com and www.valcom.com.
Should repairs be necessary, attach a tag to the
unit clearly stating company name, address,
phone number, contact person, and the nature of
the problem. Send the unit to:
Valcom, Inc.
PagePac®Repair Dept.
5614 Hollins Road
Roanoke, VA 24019-5056

2947183
PAGEPAC 6

PAGE
VOL
SPKRS MUSIC IN
MUSIC
VOL PAGE POWER
OUT
AUX
TRUNK ADAPTER
TELEPHONE
SYSTEM
INCOMING
LINE JACK
TRUNK ADAPTER
MODEL No 22050-900
J1 J2
ESD COVER NOT SHOWN
12
3
4
TO 120 VAC
60 Hz
V-5335300
or
66 Type
Block for
CO Port
Connections
Cable Lead Connect To
DC
Cable Black Blk/Wht -24 VDC GND
Modular
Cable Red Green
Yellow
Black
PAGE IN
PAGE IN
C1
GROUND
Table 1. Trunk Adapter/Amplicenter Connections
Figure 1. PagePac®6 and PagePac Trunk Adapter
Connections to Telephone System Line Port
Call Technical Support for information on connecting the Trunk Adapter to other page control units.