Valex 1372024 Operator's manual

Pompa manuale a spalla
ISTRUZIONI PER L’USO E ISTRUZIONI DI SICUREZZA
Istruzioni originali
Manual shoulder pump
INSTRUCTION MANUAL AND SAFETY INSTRUCTIONS
Translation of the original instructions
ATTENZIONE! Prima di usare il prodotto, leggete attentamente le istruzioni per l’uso
CAUTION! Before using the product, read the operating instructions carefully
M372034
08.10.2015
1372024
1372029
1372034
1372038
DATI TECNICI / RATING DATA
area for the
rating data sticker

- 2 -

- 3 -

- 4 -
i
AVVERTENZE DI SICUREZZA
ATTENZIONE! Leggere tutte le avvertenze e
tutte le istruzioni.
La mancata ottemperanza alle avvertenze e alle
istruzioni può nuocere alla salute e all’ambiente.
Utilizzate l’apparecchio nei modi descritti in
queste istruzioni. Non utilizzatelo per scopi a
cui non è destinato.
ATTENZIONE! La pompa è idonea per spruzza-
re prodotti fitosanitari liquidi per agricoltura
e giardinaggio. É vietato l’utilizzo di pitture,
vernici, liquidi infiammabili, liquidi corrosivi,
liquidi pericolosi per la salute.
Queste istruzioni riportano le informazioni e
quanto ritenuto necessario per il buon uso, la
conoscenza e la normale manutenzione dell’ap-
parecchio. Esse non riportano le informazioni
sulle tecniche di uso dei prodotti per agricoltura
e giardinaggio; l’utilizzatore troverà maggiori
notizie su libri e pubblicazioni specifiche o par-
tecipando a corsi di specializzazione.
Conservare tutte le avvertenze e le istruzioni per
riferimenti futuri.
Non permettere l’uso dell’apparecchio a per-
sone inesperte o che non conoscano queste
istruzioni.
1) Per evitare rischi per l’uomo e per l’ambiente
seguire tutte le avvertenze e le istruzioni per
l’uso.
2) Non contaminate altre colture o vegetazione,
alimenti e bevande, corsi d’acqua.
3) Tenete i bambini, estranei ed animali a distan-
za durante il funzionamento dell’apparecchio.
4) Usate l’apparecchio in un luogo con un suffi-
ciente ricambio d’aria. Non utilizzare all’interno
di una serra chiusa.
5) Non utilizzare e non indossare l’apparecchio
in presenza di temporale o a basse temperature
prossime alla formazione di ghiaccio.
6) Non operate quando c’è vento e cercate di
posizionarvi in modo che l’aria non possa
soffiarvi contro le sostanze chimiche.
7) Usare i dispositivi di protezione individuale
(DPI, non inclusi con l’apparecchio). Indos-
sare sempre protezioni per gli occhi, per le vie
respiratorie ed il corpo. Le apparecchiature di
protezione quali occhiali, maschera, calzature
di sicurezza antiscivolo, tuta protettiva e
guanti riducono la possibilità di subire lesioni
personali.
8) Tenete i capelli lunghi raccolti in una cuffia.
9) Evitare il contatto del corpo con il liquido
contenuto nell’apparecchio; se necessario
lavarsi con abbondante acqua pulita.
10) In caso di dubbio sull’utilizzo dei prodotti fi-
tosanitari affidatevi ad un tecnico specializzato
di comprovata esperienza.
11) Non distrarsi mai, controllare quello che si
sta facendo e usare il buon senso quando si
aziona l’apparecchio.
12) Non azionare l’apparecchio quando si è
stanchi o sotto l’influsso di droghe, alcol o
medicinali.
13) Non sbilanciarsi. Mantenere sempre la po-
sizione e l’equilibrio appropriati. Non utilizzare
su veicoli in movimento o su scale.
14) Durante l’uso non mangiare, non bere, non
fumare.
15) In caso di ingestione del prodotto liquido
(non incluso) consultare subito un medico o
un centro antiveleni e mostrargli il contenitore
o l’etichetta del prodotto.
16) Non forzare l’apparecchio. Usare l’appa-
recchio adatto per l’operazione da eseguire.
17) Non riempire il serbatoio fino all’orlo, rima-
nere sotto al livello corrispondente alla capacità
nominale riportata sul serbatoio.
18) La pompa deve essere utilizzata solo con
prodotti fitosanitari autorizzati dalle autorità
e dai regolamenti locali / nazionali e con pro-
dotti fitosanitari adatti all’utilizzo con pompe a
pressione manuali.
19) Non spruzzare prodotti tossici o nocivi su
persone o animali
20) I solventi o derivati del petrolio possono
essere utilizzati solamente con le pompe che
riportano in etichetta l’idoneità all’uso con
queste sostanze, cioè dotate di guarnizioni
specifiche.
21) Usare i prodotti chimici rispettando il do-
saggio e le prescrizioni di sicurezza indicate
dal produttore e in caso di contatto accidentale
lavare immediatamente la parte contaminata.
22) Non lasciare la pompa incustodita, tenere
lontano dai bambini.
23) Riporre la pompa al riparo dal sole e dal
gelo e lontano dalle fonti di calore, da alimenti,
mangimi e bevande.
24) Durante le operazioni di riempimento, svuo-
tamento, lavaggio, miscelazione, trasporto,
collocare la pompa sopra una superficie imper-
meabile in modo che un’eventuale fuoriuscita
di liquido possa essere recuperata, evitando di
contaminare l’ambiente.
25) Non utilizzare l’apparecchio se il tappo di

- 5 -
riempimento è aperto o mancante.
26) Verificate periodicamente il tubo flessibile di
mandata, non schiacciate e non piegate il tubo.
27) Non utilizzare la pompa con liquidi ad una
temperatura maggiore di 40°C
28) L’utilizzatore è responsabile verso terzi di
eventuali incidenti o danni a persone o cose.
30) Dopo l’uso lavare mai e viso è appena
possibile fare una doccia saponata (lavare
anche i vestiti e pulire o sostituire i dispositivi
di protezione).
31) Effettuare la manutenzione necessaria
dell’apparecchio, verificare la possibile usura o
la rottura delle parti e qualsiasi altra condizione
che possa influenzare il funzionamento.
32) Usare l’apparecchio in conformità con que-
ste istruzioni, tenendo conto delle condizioni
di lavorazione e dell’operazione da eseguire.
33) Non modificate l’apparecchio. Togliere, so-
stituire o aggiungere componenti non previsti
dalle istruzioni, è vietato ed annulla la garanzia.
SIMBOLOGIA
Osservate con attenzione la simbologia e me-
morizzate il rispettivo significato. Una corretta
interpretazione dei simboli consente un uso
più sicuro.
Attenzione!
Leggete con attenzione tutte le istruzioni
prima dell’uso.
Indossate guanti a protezione delle mani.
Indossate occhiali a protezione degli occhi e
maschera a protezione delle vie respiratorie.
Indossate una tuta a protezione della pelle.
Indossate stivali alti a protezione degli arti
inferiori.
Tenere le persone a distanza di sicurezza
quando si spruzza.
Non spruzzare in direzione di persone o
animali.
Non impiegare per spruzzare olii, solventi,
o derivati del petrolio (se presente).
COMPONENTI (FIG.A)
1 Serbatoio
2 Filtro ( se presente)
3 Tappo di riempimento
4 Gruppo pompante
5 Leva di erogazione
6 Fermo per flusso sempre aperto (se presente)
7 Lancia
8 Ugello
9 Leva di pompaggio
10 Impugnatura
11 Fermo per leva di pompaggio
12 Ghiera di fissaggio lancia
13 Supporto lancia
14 Impugnatura
MONTAGGIO (FIG.A)
Attenzione! Per il trasporto alcuni componenti
potrebbero essere forniti smontati e possono
trovarsi all’interno del serbatoio: verificate
ed estraeteli.
Estraete l’apparecchio i componenti e verificate
visivamente la loro perfetta integrità. Assemblate
i vari componenti (fig.A) e serrate bene tutti i
raccordi.
Il tappo (pos.3) ha al suo interno una guarni-
zione.
Regolate la lunghezza delle cinghie a spalla in
base alla vostra corporatura.
Inserite la lancia ( pos.7) sul foro dell’impugna-
tura e fissatela avvitando la ghiera di fissaggio
(pos.12).
ISTRUZIONI D’USO ( FIG.A)
Indossate sempre i dispositivi di protezione in-
dividuale (DPI) elencati nel cap. “Avvertenze di
sicurezza” e preparate a parte il prodotto liqui-
do (non incluso) da inserire dentro il serbatoio.
Attenzione! Osservate sempre le avvertenze
del prodotto in uso riguardanti i rischi per la
salute e per l’ambiente.
Nb: Al primo avvio provate la funzionalità della
pompa usando dell’acqua pulita.
Aprite il tappo del serbatoio e versate il prodotto
nel suo interno, senza superare la capacità
nominale del serbatoio (vedere tabella dati
tecnici); chiudete bene il tappo ed asciugate
l’apparecchio da eventuali gocce.
Indossate l’apparecchio a spalla (come uno zai-
no), con una mano afferrate la lancia di spruzzo

- 6 -
nella zona della leva di azionamento, mentre con
l’altra mano afferrate l’impugnatura della leva di
pompaggio.
Azionate la leva di pompaggio in su e giù con un
movimento regolare in modo da dare pressione
al liquido.
Premete ora la leva della lancia per aprire il ru-
binetto e spruzzare il liquido sulla vegetazione;
se lo spruzzo cala di intensità azionare la leva
di pompaggio secondo necessità.
Durante l’uso mantenete la lancia rivolta in avanti
e mai contro voi stessi.
Evitate di spruzzate verso l’alto in modo che il
liquido nebulizzato non vi avvolga nella zona della
bocca e del naso.
Se presente, è possibile inserire il fermo (pos.6)
per avere la lancia sempre aperta.
Se osservate delle anomalie di funzionamento
consultate il capitolo “Problemi, cause e rimedi”.
Dopo l’uso, azionate la pompa con acqua pulita,
sciacquate e svuotate il serbatoio.
TRASPORTO E RIMESSAGGIO
Per trasportare la pompa, agganciate la lancia
al supporto ( pos.13 fig.A) con l’ugello rivolto
verso l’alto e sollevate la pompa usando la
maniglia (pos.14 fig.A).
Se la pompa viene veicolata con l’ausilio di
un mezzo di trasporto, assicuratevi che non
si ribalti.
Prima del rimessaggio pulite accuratamente la
pompa seguendo le indicazioni del capitolo “
manutenzione e pulizia” e lasciatela asciugare
con il serbatoio aperto e capovolto.
Per il rimessaggio, utilizzate sempre il suo
imballo; questo lo preserverà da urti, polvere
e umidità che ne possono compromettere il
regolare funzionamento.
Riporre la pompa fuori dalla portata dei bambini,
lontano dalle fonti di calore, da alimenti, mangimi
o bevande e al riparo dal sole e dal gelo.
MANUTENZIONE E PULIZIA
ATTENZIONE! Prima di ogni controllo o
manutenzione scaricate la pressione e svuo-
tate il serbatoio.
La durata e il costo d’esercizio dipendono anche
da una costante e scrupolosa manutenzione.
Pulite regolarmente ed abbiate cura del vostro
apparecchio, vi garantirete una perfetta efficien-
za ed una lunga durata dello stesso.
ESTERNO
- Rimuovete la polvere e le gocce con un panno.
- Non usate infiammabili, detergenti o solventi
vari ma solo un panno umido e acqua.
- Le parti in plastica sono aggredibili da agenti
chimici.
INTERNO (al termine di ogni utilizzo)
- Svuotate il serbatoio e la lancia; risciacquateli
più volte compreso il gruppo pompa e il filtro,
in modo da eliminare tutti i residui del prodotto
usato.
- Asciugate molto bene.
Attenzione! Eventuali residui di prodotto
possono compromettere il successivo funzio-
namento; questo guasto non è coperto dalla
garanzia.
SOSTITUZIONE GUARNIZIONE GRUPPO POM-
PANTE
Osservate attentamente la fig.B ed agite di
conseguenza.
Attenzione! Eventuali residui di prodotto
possono compromettere il successivo funzio-
namento; questo guasto non è coperto dalla
garanzia.
PROBLEMI, CAUSE E RIMEDI
PROBLEMA CAUSE RIMEDI
Non esce
il liquido
nebulizzato
dalla lancia
Mancanza di
pressione Azionate la leva di
pompaggio
Serbatoio vuoto Riempire il serbatoio
Rubinetto della
lancia chiuso Azionare la leva della
lancia
Tubo piegato od
ostruito. Lancia
ed ugello ostruiti.
Controllare il tubo
flessibile, la lancia e
gli ugelli
Guarnizione del
gruppo pompan-
te usurata
Sostituite la guarni-
zione o rivolgetevi
ad un centro di as-
sistenza autorizzato.
Questo inconveniente
non è coperto dalla
garanzia.
Gocce di
liquido
sull’appa-
recchio
Raccordi e tappo
non serrati Serrare bene tutti i
raccordi e il tappo.
Se il problema per-
siste verificare tutte
le guarnizioni e sosti-
tuirle se necessario.
ATTENZIONE! Se dopo aver eseguito gli
interventi sopra descritti l’apparecchio non
funziona correttamente o in caso di anomalie
diverse da quelle indicate, portatelo presso un

- 7 -
centro di assistenza autorizzato esibendo la
prova di acquisto e richiedendo ricambi origi-
nali. Fate sempre riferimento alle informazioni
riportate sull’etichetta dati tecnici.
SMALTIMENTO
Per la salvaguardia ambientale procedete se-
condo le leggi vigenti del Paese in cui vi trovate.
Rivolgetevi alle autorità competenti per maggiori
notizie in merito.
GARANZIA
Il prodotto è tutelato a norma di legge contro non
conformità rispetto alle caratteristiche dichiarate
purché sia stato utilizzato esclusivamente nel
modo descritto dalle istruzioni, non sia stato
manomesso in alcun modo, sia stato conser-
vato correttamente, sia stato riparato da tecnici
autorizzati e, ove previsto, siano stati utilizzati
solo ricambi originali.
In caso di utilizzo industriale o professionale
oppure in caso di impiego simile la garanzia ha
validità di 12 mesi.
Sono esclusi dalla garanzia i componenti sog-
getti ad usura o deterioramento dovuto all’uso
normale.
Per emettere una richiesta di intervento in garan-
zia è necessario presentare la prova di acquisto
al rivenditore o ad centro assistenza autorizzato.
DICHIARAZIONE DI CONFORMITA’
La ditta indicata in etichetta dichiara sotto la
propria responsabilità che il prodotto ivi citato
è conforme ai requisiti essenziali di sicurezza e
salute contenuti nelle seguenti direttive europee:
2006/42/CE, 2009/127/CE, 97/23/CE
___________________________________
Persona autorizzata a costituire il fascicolo
tecnico presso
Valex SpA - Via Lago Maggiore 24
36015 Schio (VI) - Italy
Schio, 10.2014
Un procuratore - Attorney
ARRIGO ZANELLA

- 8 -
g
SAFETY WARNINGS
IMPORTANT! Read all the warnings and in-
structions.
Failure to observe the warnings and instructions
can harm your health and the environment.
Use the appliance as described in these instruc-
tions. Do not use it for purposes for which it was
not intended.
IMPORTANT! The pump is suitable for spraying
liquid phytosanitary products for agriculture
and gardening. It is prohibited to use paint,
varnish, flammable liquids, corrosive liquids
and hazardous liquids.
These instructions contain information deemed
necessary for proper use, knowledge and stan-
dard maintenance of the appliance. They do not
contain any information on the techniques for
using agricultural and gardening products. Users
can find more information in books and specific
publications or by taking part in training courses.
Store all warnings and instructions for future
reference.
Do not let inexperienced people or people
that have not read these instructions use the
appliance.
1) To prevent risks for humans and the envi-
ronment follow all the warnings and instruc-
tions for use.
2) Do not contaminate other crops or vegetation,
food and drinks or water courses.
3) Keep children, strangers and animals away
while the appliance is operating.
4) Use the appliance in a well-ventilated place.
Do not use inside a closed greenhouse.
5) Do not use and do not wear the appliance
during a storm or in low temperatures close
to the freezing point.
6) Do not operate in the wind and try to stand
where the air cannot blow the chemical sub-
stances against you.
7) Use personal protective equipment (PPE,
not included with the appliance). Always wear
protection for your eyes, respiratory tracts and
body. Protective equipment such as goggles,
masks, non-slip footwear, protective overalls
and gloves reduces the possibility of personal
injury.
8) Keep long hair tied back in a cap.
9) Avoid contact between your body and the
liquid contained in the appliance; if necessary
wash yourself with plenty of clean water.
10) In case of doubt on how to use phytosanitary
products, contact a specialist technician with
consolidated experience.
11) Never allow yourself to be distracted. Control
what you are doing and use your common
sense when using the appliance.
12) Never use the tool when you are tired
or under the influence of drugs, alcohol or
medicines.
13) Do not lose your balance. Always keep an
appropriate position and balance. Do not use
on moving vehicles or on ladders.
14) During use do not eat, drink or smoke.
15) If you swallow the liquid product (not in-
cluded) seek medical advice straight away or
contact a poison control centre and show them
the product container or label.
16) Do not force the appliance. Use a suitable
appliance for the operation to be carried out.
17) Do not fill the tank to the brim, but stay below
the level corresponding to the nominal capacity
shown on the tank.
18) The pump must only be used with phyto-
sanitary products authorised by the authorities
and local/national regulations and with phyto-
sanitary products suitable for use with manual
pressure pumps.
19) Do not spray toxic or harmful products on
people or animals.
20) Solvents or oil by-products can only be
used with pumps whose labels state they are
suitable for use with these substances, i.e.
equipped with specific gaskets.
21) Use chemical products respecting the dose
and safety instructions indicated by the manu-
facturer and in the event of accidental contact
immediately wash the contaminated part.
22) Do not leave the pump unsupervised and
keep it away from children.
23) Put away the pump where it is protected
from the sun and frost and away from heat
sources, foods, animal feed and drinks.
24) During filling, emptying, washing, mixing
and transport operations, place the pump on a
waterproof surface so that any liquid that leaks
out can be cleaned up without contaminating
the environment.
25) Do not use the appliance if the filler cap is
open or missing.
26) Periodically check the delivery hose, do not
crush or bend the hose.
27) Do not use the pump with liquids at a tem-
perature of over 40 °C.
28) The user is responsible for other people

- 9 -
as far as accidents or damage to people or
property are concerned.
30) After use, wash your hands and face and
have a shower with soap as soon as possible
(also wash clothes and clean or replace pro-
tective equipment).
31) Perform the necessary maintenance on
the appliance. Check if any parts are worn
or broken and any other condition that could
affect its operation.
32) Use the appliance according to these in-
structions, considering the work conditions
and the operation to be performed.
33) Do not tamper with the appliance. Taking off,
replacing or adding components not included
in the instructions is prohibited and causes the
warranty to become null and void.
SYMBOLS
Look carefully at the symbols and memorise
their respective meanings. Correct interpretation
of the symbols allows safer use.
Warning!
Carefully read all instructions before use.
Wear protective gloves.
It is compulsory to wear eye protection and
a mask to protect your respiratory tracts.
Wear overalls to protect your skin.
Wear high boots to protect your legs.
Keep people at a safe distance when
spraying.
Do not spray towards people or animals.
Do not use oils, solvents or oil by-
products (if present) for spraying.
COMPONENTS (FIG. A)
1 Tank
2 Filter (if provided)
3 Filler cap
4 Pump unit
5 Dispensing lever
6 Open flow catch (if provided)
7 Lance
8 Nozzle
9 Pump lever
10 Hand grip
11 Pump lever catch
12 Lance fixing nut
13 Lance support
14 Handgrip
ASSEMBLY (FIG. A)
Warning! For transport some components may
be supplied disassembled and can be found
inside the tank: check and take them out.
Take out the appliance and components and vi-
sually check they are perfectly intact. Assemble
the various components (fig. A) and tighten all
the connections properly.
The cap (pos.3) has a gasket inside it.
Adjust the length of the shoulder straps accor-
ding to your size.
Insert the lance (pos.7) in the hand grip hole and
fix it by screwing the fixing nut (pos.12).
INSTRUCTIONS FOR USE (FIG. A)
Always wear personal protective equipment
(PPE) listed in the “Safety warnings” chapter
and prepare the liquid product (not included)
separately to be put into the tank.
Warning! Always observe the warnings on
using the product concerning risks to your
health and the environment.
NB: When you first start the pump check that
it works correctly with clean water.
Open the cap of the tank and pour the product
into it without exceeding the nominal tank capa-
city (see technical data table); close the cap well
and dry the appliance if there are any drips on it.
Wear the appliance over your shoulder (like a
rucksack), with one hand hold the spray lance
in the activation lever area and with the other
hand hold the pump lever hand grip.
Activate the pump lever up and down with a

- 10 -
regular movement so as to put the liquid under
pressure.
Now press the lance lever to open the tap
and spray the liquid onto the vegetation; if the
spray loses intensity activate the pump lever
as required.
During use, keep the lance facing forwards and
never against yourself.
Do not spray upwards so that the nebulised liquid
does not end up around your mouth and nose.
If present, the catch can be engaged (pos.6) so
that the lance stays open.
If you notice any operating faults, consult the
“Problems, causes and solutions” chapter.
After use, activate the pump with clean water,
rinse and empty the tank.
TRANSPORT AND STORAGE
To transport the pump, hook the lance to the
support (pos.13 fig. A) with the nozzle facing
upwards and lift the pump using the handle
(pos. 14 fig. A).
If the pump is transported in a vehicle make sure
it does not overturn.
Before storage clean the pump carefully fol-
lowing the indications in the “maintenance and
cleaning” chapter and leave it to dry with the
tank open and overturned.
Always use the packaging when storing the
appliance; this will protect it from impact, dust
and humidity which can compromise normal
operation.
Store the pump out of reach of children, away
from heat sources, food, animal feed or drinks
and protected from the sun and frost.
MAINTENANCE AND CLEANING
IMPORTANT! Before any checks or main-
tenance, release the pressure and empty the
tank.
The working life and costs also depend on con-
stant and meticulous maintenance. Take good
care of your appliance and clean it regularly. In
this way its efficiency will be ensured and its
lifespan extended.
OUTSIDE
- Remove dust and drips with a cloth.
- Do not use flammable substances, detergents
or solvents but just a damp cloth and water.
- The plastic parts can easily be damaged by
chemical agents.
INSIDE (at the end of every use)
- Empty the tank and the lance; rinse numerous
times including the pump unit and filter, so as
to remove all remains of the product used.
- Dry thoroughly.
Warning! Any remains of product can compro-
mise subsequent operation; this failure is not
covered by warranty.
REPLACING THE PUMP UNIT GASKET
Carefully observe fig. B and act accordingly.
Warning! Any remains of product can compro-
mise subsequent operation; this failure is not
covered by warranty.
PROBLEMS, CAUSES AND SOLUTIONS
PROBLEM CAUSE SOLUTION
The nebu-
lised liquid
does not
come out of
the lance
Lack of pressure Activate the pump
lever
Tank empty Fill the tank
Lance tap closed Activate the lance
lever
Hose bent or ob-
structed. Lance
and nozzle ob-
structed
Check the hose, the
lance and the nozzles
Pump unit gasket
worn Replace the gasket
and contact an autho-
rised service centre.
This problem is not
covered by warranty
Drops of li-
quid on the
appliance
Connections and
cap not tightened Tighten all the con-
nections and cap
well. If the problem
persists check the
gaskets and replace
them if necessary
IMPORTANT! If the appliance still fails to
operate correctly after you have carried out
the above operations, or in the event of faults
other than those described above, take it to
an authorised service centre showing proof
of purchase, and ask for original spare parts.
Always refer to the information shown on the
technical specifications label.
DISPOSAL
In order to protect the environment, proceed
according to the local laws in force. Contact the
relevant authorities for more information.

- 11 -
WARRANTY
The product is protected by law against non-
compliance with the declared characteristics
provided it is used only in the manner described
in the instructions, it has not been tampered with
in any way, it has been stored properly, has been
repaired by authorized and, where applicable,
have been used only original spare parts.
In the case of industrial or professional use or
when using such a guarantee is valid for 12
months.
To issue a claim under warranty you must
present proof of purchase to your dealer or
authorized service center.
DECLARATION OF CONFORMITY
The company stated on the label declares under
sole responsibility that the product mentioned
herein is in conformity with the essential requi-
rements of safety and health in the following
European Directives:
2006/42/EC, 2009/127/EC, 97/23/EC
___________________________________
The person authorized to compile the technical
file is in
Valex SpA - Via Lago Maggiore 24
36015 Schio (VI) - Italy
SSchio, 10.2014
Un procuratore - Attorney
ARRIGO ZANELLA


Codice
Code 1372024
Massa a vuoto
Mass when empty 3,3 kg
Massa con serbatoio pieno
Mass with full tank 19,3 kg
Capacità nominale del serbatoio
Nominal tank capacity 16 l
1372024 rating data sticker (58x28mm)
Codice
Code 1372029
Massa a vuoto
Mass when empty 2,7 kg
Massa con serbatoio pieno
Mass with full tank 22,7 kg
Capacità nominale del serbatoio
Nominal tank capacity 20 l
1372029 rating data sticker (58x28mm)
Codice
Code 1372034
Massa a vuoto
Mass when empty 2,4 kg
Massa con serbatoio pieno
Mass with full tank 14,4 kg
Capacità nominale del serbatoio
Nominal tank capacity 12 l
1372034 rating data sticker (58x28mm)
Codice
Code 1372036
Massa a vuoto
Mass when empty ___ kg
Massa con serbatoio pieno
Mass with full tank ___ kg
Capacità nominale del serbatoio
Nominal tank capacity 16 l
1372036 rating data sticker (58x28mm)
Codice
Code 1372038
Massa a vuoto
Mass when empty 2,4 kg
Massa con serbatoio pieno
Mass with full tank 14,4 kg
Capacità nominale del serbatoio
Nominal tank capacity 12 l
1372038 rating data sticker (58x28mm)
This is not a page
of the instruction manual.
Print only the data sticker
to be put on the istruction
manual front page.
Print the data sticker
on white adhesive paper.
This manual suits for next models
4
Table of contents
Languages:
Other Valex Water Pump manuals
Popular Water Pump manuals by other brands

DÖRR
DÖRR EcoPump VP Operation manual

Richter
Richter V&A RMI Series Installation and operating manual

Wilo
Wilo TM Series Installation and operating instructions

Renkforce
Renkforce 2302374 operating instructions

AirTech
AirTech VCX 60 Operating and maintenance instructions

EVA
EVA EVAstream Mounting & installation

IWAKI AMERICA
IWAKI AMERICA Walchem EWN-Y Quick start programming guide

LUBE
LUBE EGH-2C Operation manual

WIKA
WIKA 6 Series operating instructions

Graco
Graco Therm-O-Flow C03508 Instructions and parts

BLACKMER
BLACKMER TRANSMAX TX206A Installation, operation and maintenance instructions

Pentair
Pentair Flotec E75STVT owner's manual