V&D Electric Bikes Go-Bike Q1 User manual

1
Go-Bike Q1 Electric Scooter
CLCC:T~IC: ?1 an-<CS
USER MANUAL
--:1-00% fu(( FoldiV\9

2

1.1 Out of the box assembly
3
1.Unfold top
body
wheel screw pin
and unfold front wheel
2.Turn out rea
wheel screw pin
and unfold rear whee
.
Lock the fron
wheel
wheel
Adjust the
brake to the
proper position
and tighten the screw

4
1.2 Unfold Size:
Size : mm
• 430 -------
940 940
740
---- 1100

1.3 Specifications
5
Specification Parameter Specif Ication Parameter
-. .
Speed: 25-30km/h yvaterproof IP67
-- -· --
Max Load: 120Kg ~attery: 3P1OS 18650 import battery cell
--
Max Range: 30Km Shock absorption: Alloy frame damping + seat
Climbing Angle: About 18° Material: ~yiat _ic;>_~ g~ade_a_l~minumalloy
Gharger rated watt: 70w Wheels: 14 inch inflatable rubber tire
Gharging time: 3.5h Motor: 350W
Brake distance: 2.4m Front LED: Environmentally sensitive LED
·- -- - .
Braking method: Disc+electronic Rear LED: En_\lironmenta.lly sensitive LED
., . .
Suitable age: 14-50 Years old Display: Show battery power/speed etc
Applicable height: 120-200cm Range testing: 70kg,flat road testing
Operating temp: -10-40°( Cruise function: Keep t~r~tle 6-7s will enter cruise
-
-.. . .
s_to_rag~_temp: -20-45°( Hardened road surface, flat road
USB: Applicable road:
SV,1A . . -
Motor control: Square wave vector Note: Please follow local traffic
regulations and wear a helmet
18-20 mph
275
30 miles
14-90 years old
500W

8
APP:
6

1.4 Product composition
6
Turn on/off,Gear switch
Foldable --
Led Liight -- Foldable
Syste,rm-
,--------Seat
Battery
Led Light
350W
- Motor
7

9
8

10
9

11
10

12
11

13
12

14
13

15
14

16
15

17
6Ah/7.8Ah/ 9.6Ah
36V Battery
16

18
17

19
18

20
19

1.5 Safe use specifications
• 5.1 Charging method
• The first step: the charging port is on the left side of the battery, as shown on the right;
• Step 2: Plug the charger charging port into the charging port on the battery (make sure the charging interface is
dry);
• Step 3: The indicator light on the charger is red, indicating that it is charging; when the indicator changes from red
to green,
• Indicates that the battery is fully charged. Please stop charging at this time, and charging for a long time will affect
the battery life;
• Step 4: After charging is completed, you need to cover the charging port cover to avoid water ingress.
• 5.2 safe charging specification
• • Charge the battery for at least 5 hours before first running.
• • To maximize battery life, charge once a month or 2 days after each ride. Please charge at a suitable temperature.
• • Failure to charge on time may result in damage to the battery. As time goes by, the battery will gradually run out
of light, eventually causing the battery to be over-discharged.
• • Use the battery, charger, and cable supplied by the original manufacturer. In order to avoid battery overcharge, it
is dangerous.
• • Make sure the charger cable is properly connected and has adequate ventilation.
• • Be sure to use it in a dry environment. Never allow the charger or cable to come into contact with water as this
may result in electric shock. Never touch with wet hands. Unplug the power cord immediately if any problems
occur during charging.
• • Be sure to pull out the plug and do not pull the plug out of the cable.
• • Do not allow the charger or cable to touch sharp or hot items.
• • Perform a visual inspection of the cable for the charger and charger on a regular basis.
• • If the charger or cable is damaged, do not use the charger to avoid further damage
7
20