Varifocal IR Bullet Camera
User Manual
Features
Caution
Accessories list
1
2
3
Camera
Sunshield Housing
Items Quantity
1 PC
1 PC
No.
Installation
Specifications Dimensions
ⅠⅡⅢ
ⅣⅥ
Ⅴ
nDo not disassemble or modify the camera to avoid possible fire, electric
shock or other hazard. Please refer repairs or service to a qualified
service technician.
nTake care when installing the camera. Avoid scratching the front glass window.
nAvoid Shock, Vibration. Do not install the camera on an unstable surface. It
can be damaged by improper use or storage.
nNever point the camera towards direct sunlight or other sources of bright
light in order to avoid a dimmer image due to too much backlighting.
nranges.Use the camera withi n the publishe d temp erature, humidity, and elec trical
nProvide ample slack in the video and power cables once the camera is
installed in its final position.
nRequest for service by a qualified technician if the camera malfunctions or
generates excessive amounts of heat.
Unpack the camera carefully and make sure that all accessories are included for
the installation.
All data and specifications subject to change without notice.
Adjustments
1、 Fix the mounting bracket to the wall as below figure.
Adjust varifocal lens according to the application.
When adjusting, the lens should be dismantled carefully by professional installer.
●Integrates varifocal lens allows for versatile utilization.
●The camera use high sensitive colour interline transfer
●
●
●
●Integrated efficient powerful IR LED array can capture high-resolution
picture even in complete darkness. IR lighting distance 25~30m。
●Light control design. Auto light detection for IR LED switch control.
●Exquisite design for circuit and structure, depicts high technology.
●Aluminum structure, All-sealed water-proof body.
●Outdoor sunshield housing available.
1/3" Sony CCD.
Latest DSP controls for BLC, white balance, and gain control
Automatic back-light compensation improves the image quality.
Auto-IRIS controlled by electronic system..
PARTS DESCRIPTION
View Angle adjustment
Focus adjustment
Figure 1 Figure2
Figure 3
1.Screw off the camera's back cover .(Figure 1)
2.Use a right-angled screwdriver to insert the View Angle or Focus adjustment
groove , and adjust the View Angle or Focus respectively to get a fine image
effect. (Figure 2)
3. After adjustment finished, gyre the back cover, and cover the sunshield
on the camera.(Figure 3).
Manual 1 copy
ITEM
VAEBLIR30VFV
Image Sensor
1/3" Sony CCD
Effective Pixels
PAL:500(H)×58 2(V) NT SC:50 0(H)×49 2(V)
Resolution
460TVLines
Lens
Minimum Illumination
S/N Ratio
More than 48 dB
Gamma correction
0.45
AGC
Automatic
Output Signal
1.0Vp-p
Signal System
PAL / NTSC system
Varifocal lens, f=4~9 mm DC Au to Iris
Shutter Speed
Power Supply Regulated12VDC
Sync Mode INT
BLC
Dimension 83(dia)x195(L)x178(H)mm
Weight 850g
Consumed Current
Operating Temperature
White Balance
-10℃~+50℃ RH95%MAX (non-condensing)
Automatic
1/50～1/100,000sec(PAL) 1/60～1/100,000sec(NTSC)
Automatic
IR-LED Drive ON:1～3Lux; OFF:5～6Lux
IR-LED Wave Length: ×850nm 48pcs IR-LED
Day/Night Auto m
Switch
atica ll y
Illumination < 1～3 Lux/F2.0
0.3Lux/F1.2(IR-LED OFF), 0Lux(IR-LED ON)
150mA (IR OFF)+ 650mA(IR-LED ON)
Body Aluminum
Sunshield Housing
Camera
IR-LED
Bracket
VIDEO
12VDC
4Screws 1 bag
2、Connect the camera with DC12V adapter and video output connector,
power up and a video picture will be seen at the monitor.
Housing IP 65
Compliance PS Cable 214500UL,CE,FCC
VAEBLIR30VFV
5Mounting Bracket 1PC
www.vantage.eu.com
ver 1.0
