VARO POWERPLUS POWDP6020 User manual

POWDP6020 EN
Copyright © 2019 VARO P a g e | 1www.varo.com
1APPLICATION ................................................................................2
2DESCRIPTION (FIG. 1)...................................................................2
3PACKAGE CONTENT LIST............................................................2
4SYMBOLS.......................................................................................2
5GENERAL POWER TOOL SAFETY WARNINGS.........................3
5.1 Working area..........................................................................................................3
5.2 Electrical safety .....................................................................................................3
5.3 Personal safety......................................................................................................3
5.4 Battery tool use and care......................................................................................4
5.5 Service....................................................................................................................4
6ADDITIONAL SAFETY HINTS........................................................4
7ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND
CHARGERS ....................................................................................4
7.1 Batteries.................................................................................................................4
7.2 Chargers.................................................................................................................5
8CHARGER.......................................................................................5
8.1 Charging indication...............................................................................................5
8.2 Charging process..................................................................................................5
8.3 Battery capacity indicator.....................................................................................5
9ASSEMBLY.....................................................................................6
10 OPERATION....................................................................................6
11 CLEANING AND MAINTENANCE .................................................6
12 TROUBLE SHOOTING ...................................................................7
13 TECHNICAL DETAILS....................................................................7
14 WARRANTY....................................................................................7
15 ENVIRONMENT ..............................................................................8
16 DECLARATION OF CONFORMITY ...............................................9

POWDP6020 EN
Copyright © 2019 VARO P a g e | 2www.varo.com
ASH CLEANER 20 L (NO ACCU)
POWDP6020
1 APPLICATION
For cleaning the fireplace, barbecue, etc. easy. Also perfect for removing sawdust and debris
particles.
It is not designed for professional use.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your tool should only be
passed on together with these instructions.
2 DESCRIPTION (FIG. 1)
1. Switch button
2. Battery pack
3. Cover
4. Lock
5. Hook rack
6. Tank
7. Inlet
8. Hose
9. Aluminium tube tie
10. Aluminium nozzle
3 PACKAGE CONTENT LIST
▪Remove all packaging materials.
▪Remove remaining packing and package inserts (if included).
▪Check that the package contents are complete.
▪Check the appliance, the power cord, the power plug and all accessories for transportation
damage.
▪Keep the packing materials as far as possible till the end of the warranty period. Dispose it
into your local waste disposal system afterwards.
WARNING: Packaging materials are not toys! Children must not play with
plastic bags! Danger of suffocation!
1pc ash cleaner
1pc manual
1pc Ø3.65 cm x 100 cm suction hose
1pc alu nozzle (Ø3.4 cm x 23 cm)
1pc Hepa filter
1pc aluminium tube tie
If any parts are missing or damaged, please contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Denotes risk of personal
injury or damage to the tool.
Read the manual before use.
In accordance with essential
safety standards of applicable
European directives.
Class II - The machine is
double insulated; earthing wire
is therefore not necessary.

POWDP6020 EN
Copyright © 2019 VARO P a g e | 3www.varo.com
5 GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to heed warnings and follow instructions
may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions
for future reference. The term "power tool" in the safety warnings refers to your mains-
operated (corded) power tool or battery- operated (cordless) power tool.
5.1 Working area
▪Keep working area clean and well lit. Untidy and dark areas can lead to accidents.
▪Do not operate power tools in potentially explosive surroundings, for example, in the
presence of inflammable liquids, gases or dust. Power tools create sparks which may
ignite the dust or fumes.
▪Keep children and bystanders at a distance when operating a power tool. Distractions can
cause you to lose control of it.
5.2 Electrical safety
▪Always check that the power supply corresponds to the voltage on the rating plate.
▪Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
adapter plugs with earthed power tools. Unmodified plugs and matching outlets will reduce
the risk of an electric shock.
▪Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges and
refrigerators. There is an increased risk of an electric shock if your body is earthed.
▪Do not expose power tools to rain or wet conditions. If water gets inside a power tool, it will
increase the risk of an electric shock.
▪Do not damage the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of an electric shock.
▪When operating a power tool outdoors, use an extension cable suitable for outdoor use.
Using a cord suitable for outdoor use reduces the risk of an electric shock.
▪If operating a power tool in a damp location is unavoidable, use a power supply protected
by a residual current device (RCD). Using an RCD reduces the risk of an electric shock.
5.3 Personal safety
▪Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention when operating a power tool may result in serious
personal injury.
▪Use safety equipment. Always wear eye protection. Using safety equipment such as a
dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed
will reduce the risk of personal injury.
▪Avoid accidental starts. Ensure the switch is in the off position before inserting the plug.
Carrying power tools with your finger on the switch or plugging in power tools when the
switch is in the on position makes accidents more likely.
▪Remove any adjusting keys or spanners before turning on the power tool. A spanner or
key left attached to a rotating part of the power tool may result in personal injury.
▪Do not reach out too far. Keep your feet firmly on the ground at all times. This will enable
you retain control over the power tool in unexpected situations.
▪Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from the power tool. Loose clothes, jewellery or long hair can become
entangled in the moving parts.
▪If there are devices for connecting dust extraction and collection facilities, please ensure
that they are attached and used correctly. Using such devices can reduce dust-related
hazards.

POWDP6020 EN
Copyright © 2019 VARO P a g e | 4www.varo.com
5.4 Battery tool use and care
▪Recharge only with the charger specified by the manufacturer. A charger that is
suitable for one type of battery pack may create a risk of fire when used with
another battery pack.
▪Use power tools only with specifically designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
▪When battery pack is not in use, keep it away from other metal objects, like paper
clips, coins, keys, nails, screws or other small metal objects that can make a
connection from one terminal to another. Shorting the battery terminals together
may cause burns or a fire.
▪Under abusive conditions, liquid may be ejected from the battery; avoid contact.
▪If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause irritation or burns.
5.5 Service
▪Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 ADDITIONAL SAFETY HINTS
▪Do not vacuum any sharp-edged, hot or incandescent materials.
▪The appliance should not be exposed to heat. For use with cold ashes only!（≤40 °C）
▪Do not vacuum any moist or liquid substances. Never immerse the appliance in water.
▪Do not put any object into openings. Do not use with any opening blocked. Keep free of
dust, lint, hair etc.
▪Do not use the vacuum cleaner without dust container or dust filter in place.
▪Do not vacuum any flour, cement etc., in order to avoid the overloads.
▪The appliance should only be cleaned with a dry or damp cloth; it should never immersed
in water. Do not use any solvents for cleaning.
▪This appliance is intended for domestic use only and not for commercial applications.
▪Empty and clean vacuum cleaner before and after vacuuming to avoid the collection of
materials that could pose a fire hazard in the vacuum cleaner.
▪Always check hoses and vacuum cleaner for heating when vacuuming.
▪The battery must be removed from the appliance before it is scrapped.
▪Do not look into the air vents when the unit is switched on, as sometimes there is a
possibility of small debris being discharged from the air vents, especially after
cleaning/replacement of the filters as debris inside the unit can be disturbed.
7 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND
CHARGERS
Use only batteries and chargers applicable for this machine.
7.1 Batteries
▪Never attempt to open for any reason.
▪Do not store in locations where the temperature may exceed 40 °C.
▪Charge only at ambient temperatures between 4 °C and 40 °C.
▪When disposing of batteries, follow the instructions given in the section “Protecting the
environment”.
▪Do not cause short circuits. If connection is made between the positive (+) and negative (-)
terminal directly or via accidental contact with metallic objects, the battery is short circuited
and an intense current will flow causing heat generation which may lead to casing rupture
or fire.

POWDP6020 EN
Copyright © 2019 VARO P a g e | 5www.varo.com
▪Do not heat. If batteries are heated to above 100 °C, sealing and insulating separators
and other polymer components may be damaged resulting in electrolyte leakage and/or
internal short circuiting leading to heat generation causing rupture or file. Moreover do not
dispose of the batteries in fire, explosion and/or intense burning may result.
▪Under extreme conditions, battery leakage may occur. When you notice liquid on the
battery, proceed as follows:
−Carefully wipe the liquid off using a cloth. Avoid skin contact.
−In case of skin or eye contact, follow the instructions below:
✓Immediately rinse with water. Neutralize with a mild acid such as lemon juice or
vinegar.
✓In case of eye contact, rinse abundantly with clean water for at least 10 minutes.
Consult a physician.
Fire hazard! Avoid short-circuiting the contacts of a detached battery. Do
not incinerate the battery.
7.2 Chargers
▪Never attempt to charge non-rechargeable batteries.
▪Have defective cords replaced immediately.
▪Do not expose to water.
▪Do not open the charger.
▪Do not probe the charger.
▪The charger is intended for indoor use only.
▪Do not use an extension cord. Plug the charger directly into an electrical outlet.
▪Use the charger only in an standard electrical outlet (100-240 V/50-60 Hz).
▪To reduce risk of damage to electric plug and cord, pull by plug rather than cord when
disconnecting charger.
8 CHARGER
▪Connect the charger to the power outlet socket. (Fig. 2)
8.1 Charging indication
▪Solid green: ready to charge.
▪Twinkling red: charging.
▪Solid green and red: charged.
▪Red light blink: hot or cool battery.
▪Red and green lights blink: defective battery
8.2 Charging process
▪Frequently monitor the charger and battery pack while connected.
▪Unplug the charger and disconnect it from the battery pack when finished.
▪Allow the battery pack to cool completely before using it.
▪Store the charger and battery pack indoors, out or reach of children.
▪Note: if battery is hot after continuous use in the tool, allow it to cool down to room
temperature before charging. This will extend the life of your batteries.
8.3 Battery capacity indicator
▪There are battery capacity indicators (L1, L2 & L3) on the battery pack such as the Fig.3
shows, you can check the capacity status of the battery with squeezing the button (B).
▪Before use the machine, please press switch trigger to check if the battery is full enough
for properly working.
▪The statuses of three LED lights show the capacity level of the battery:
i. L1, L2 & L3 lights all lit: the battery is fully charged.

POWDP6020 EN
Copyright © 2019 VARO P a g e | 6www.varo.com
ii. L2 & L3 light all lit: the battery has about 60% capacity.
iii. L3 light is lit: battery almost discharged.
▪Note: please charge the battery after using each time, it is necessary to charge the
battery per month if the machine is out of work.
9 ASSEMBLY
▪Before you start the appliance, make sure that the dust filter is in the position. (Fig. 4)
▪Assemble the ash vacuum cleaner. (Fig. 5)
▪Connect the hose, the notch is aimed at the triangle. (Fig. 6)
▪Connect the aluminium nozzle. (Fig. 7)
▪Install the battery pack. (Fig. 8)
Note: Before use the ash vacuum, make sure all connectors and the dust
filter subassembly is tightly fastened. The container and dust filter must be
completely dry.
10 OPERATION
▪Before you start the appliance, make sure that the filter is in the position.
▪Switch on.
≤40 °C!!! For use with cold ashes only!
11 CLEANING AND MAINTENANCE
Clean the filter before/after each use
▪If the suction strength deteriorates during use, turn off the ash vacuum cleaner.
▪Once the container is full to the suction nozzle, empty the contents of the container.
▪Remove the suction hose and loosen the cover with the lock tabs.
▪Hold the dust filter and loosen the V type nut by hand
▪Remove the cover and dust filter from the metal rod
▪Wash the dust filter by clean and warm water.
▪Dry the dust filter before re-use.
Caution: Do not use cleaning agents to clean the plastic parts of the tool. A
mild detergent on a damp cloth is recommended. Water must never come
into contact with the tool.

POWDP6020 EN
Copyright © 2019 VARO P a g e | 7www.varo.com
12 TROUBLE SHOOTING
PROBLEM
CAUSE
ACTION
Motor does not start
- The battery pack is not
installed.
- The battery pack has been
damaged.
- The battery pack has no
power.
Cleaner not switched on.
- Install the battery pack.
- Replace the qualified battery
pack.
- Charge the battery pack.
- Switch on the appliance.
Suction power is weaker
-Unit clogged
-Dust filter needs cleaning
-Dust container not in
position.
-Filter blocked.
-Remove the blockage.
-Clean the dust filter.
-Attach the dust container
again to the cleaner.
-Clean the filter.
13 TECHNICAL DETAILS
Model nr.
POWDP6020
Voltage / frequency
20 V DC
Tank volume
20 l
Tank size
Ø295 mm, height 310 mm
Suction power
>6 kap
Battery pack
20 V DC, Li-ion, 1500 mAh
Charger rating input
100-240 VAC 50/60 Hz
Charger rating output
20 V, 1,5 A
Charge time
1 hour
14 WARRANTY
▪This product is warranted for a 36-month period effective from the date of purchase by the
first user.
▪This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
▪Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
▪We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
▪Repairs may only be carried out by an authorised customer service centre for Powerplus
tools.
▪You can always obtain more information at the number 00 32 3 292 92 90.
▪Any transportation costs shall always be borne by the customer, unless agreed otherwise
in writing.
▪At the same time, no claim can be made on the warranty if the damage of the device is the
result of negligent maintenance or overload.
▪Definitely excluded from the warranty is damage resulting from fluid permeation, excessive
dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate
usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not
following the instructions given in the manual), inexpert assembly, lightning strike,
erroneous net voltage. This list is not exhaustive.

POWDP6020 EN
Copyright © 2019 VARO P a g e | 8www.varo.com
▪Acceptance of claims under warranty can never lead to the prolongation of the warranty
period nor commencement of a new warranty period in case of a device replacement.
▪Devices or parts which are replaced under the warranty therefore remain the property of
Varo NV.
▪We reserve the right to reject a claim whenever the purchase cannot be verified or when it
is clear that the product has not been properly maintained. (Clean ventilation slots, carbon
brushes serviced regularly, etc.).
▪Your purchase receipt must be kept as proof of date of purchase.
▪Your appliance must be returned undismantled to your dealer in an acceptably clean state,
(in its original blow-moulded case if applicable to the unit), accompanied by proof of
purchase.
15 ENVIRONMENT
Should your appliance need replacement after extended use, do not dispose of it
with the household refuse, but in an environmentally safe way.
Waste produced by electrical machine items should not be handled like normal
household rubbish. Please recycle where recycle facilities exist. Check with your
Local Authority or retailer for recycling advice.

POWDP6020 EN
Copyright © 2019 VARO P a g e | 9www.varo.com
16 DECLARATION OF CONFORMITY
VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that,
Product: Ash cleaner
Trade mark: POWERplus
Model: POWDP6020
is in conformity with the essential requirements and other relevant provisions of the applicable
European Directives, based on the application of European harmonized standards. Any
unauthorized modification of the apparatus voids this declaration.
European Directives (including, if applicable, their amendments up to the date of signature):
2011/65/EU
2006/42/EC
2014/30/EU
European harmonized standards (including, if applicable, their amendments up to the date of
signature):
EN60335-1 : 2012
EN60335-2-2: 2010
EN55014-1 : 2017
EN55014-2 : 2015
EN61000-3-2 : 2014
EN61000-3-3 : 2013
Keeper of the Technical Documentation: Philippe Vankerkhove, VARO –Vic. Van Rompuy
N.V.
The undersigned acts on behalf of the company CEO,
Ludo Mertens
Certification Manager
28/06/2019, Lier - Belgium