3. Fill the kettle with water to the desired level, do not overfill or there will be a risk of spillage or spitting. Do not forget to
close the lid after filling; otherwise the kettle will not automatically switch off after use.
4. Do not fill with less than 0.5liter of water (up to “MIN” indication) to prevent the kettle running dry while operating
5. Do not fill with more than 2.0liter of water (up to “MAX” indication)
6. An automatic safety cutout has been fitted for protection against overheating; it will operate if the kettle is switched on
then containing insufficient water. Always ensured that the water inside the kettle covers the minimum mark .if the
automatic safety cut-out has operated, disconnect from the power outlet and allow the kettle to cool down for 5 to 10
minutes, then refill with water and switch on-the kettle will then boil and cut off as in normal operation
7. Place the power base on a dry flat surface
8. Place the kettle on the power base, the electrical connections will be made automatically as the kettle slides onto the
power base
9. Plug the cord set into an earthed power socket
10. The appliance is switched on by pressing the ON/OFF switch, the pilot light will come on
11. When the water has boiled, the kettle will switch off automatically
12. Do not remove the kettle from the power base without switching off first
13. To pour water, lift the kettle from the power base and pour
HOW TO CARE FOR YOUR KETTLE
Wipe the exterior of the kettle with a soft, damp cloth or sponge, remove stubborn sports with a cloth moistened with mild
liquid detergent, do not use abrasive scouring pads or powders, never immerse the kettle in water or other liquids
From time to time depending on the nature of your water supply, a limescale deposit is naturally formed and can be found
mostly adhered to the heating element and reduces the heating capacity, the amount of limescale deposited (and
subsequently the need to clean or descale) largely depends on the water hardness in your area and the frequency with
which the kettle is used.
Limescale is not harmful to your health, but if poured into your beverage, it can give a powdery taste to your drink, therefore,
the kettle should be descales periodically as indicated below:
DESCALING:
Descale the kettle regularly, with normal use, at least twice a year.
1. Fill the kettle up to “MAX” with a mixture of one part ordinary vinegar and two parts water, switch on and wait for the
appliance to switch off automatically
2. Let the mixture remain inside the kettle overnight
3. Throw the mixture away next morning
4. Fill the kettle with clean water up to “MAX” and boil again
5. Throw away this boiled water to remove any remaining scale and vinegar
6. Rinse the inside of the kettle with clean water
360’CONNECTOR BASE
The 360’connecotr between the kettle and its base means that the kettle can be located at any point on the base. This is
ideal for left and right-handed users as the kettle can be positioned conveniently on your kitchen counter.
