VBC Racing WildFire D08 User manual

COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT
1/10 4WD ELECTRIC COMPETITION TOURING CAR KIT
E
INSTRUCTIONS MANUAL
5
Thank you for purchasing VBC Racing product.
This VBC Racing kit is a high performance, racing grade car kit
intended for experienced racers. The kit compose of VBC
formulated composite materials, top quality full carbon fiber
chassis and high grade 7075 material which will give you a
competitive edge over the others.
Novice racer should seek advice from more experienced racer
before assembly.
Always keep this instruction manual handy at all times for quick
reference even after completing the assembly.
Before your assembly, sand the chassis edges.
Things that we should remind you.
Sand the chassis edges with #600 sand paper and apply CA
glue to the edges and counter sink holes.
Need help or support.
If you need help or you would like to leave us a comment,
please email to our support team: [email protected] or
visit our web site www.vbcracing.com

CA

38
BAG MARKED
STEP2-3
Rear Gear Diff Left Side
Rear Gear Diff Right Side Assembly Cross Section
Diff Gear 18T
Diff Outdrive
Right Gear
Diff Housing
Outdrive Sealer O-Ring
10x15 Ball Bearing
M2x10 Shaft Pin
15x0.3 Shim
Diff Oil
Rear Gear Diff Right Side
Apply small amount of diff oil

BAG MARKED

-1

6
19mm 19mm
19mm
19mm
A
B
+ +

Thead Lock
06

Original Setup
5 2 1.75 1.5 1.25 0.5 0.25 0

Arm Pin Pivot Ball
Grease
Grease
1.8mm

2
0.75
0.5
0.25
0
-0.25
-0.5
-0.75
-1
-1.25

Turnbuckle Cup S
Turnbuckle Cup