Veer CRUISER User manual

HELLO!
Accessorizing your Veer Cruiser is
part of the fun!
This Infant Car Seat Adapter (for
your Graco, Britax or Uppababy
Infant Car Seat) will allow your
infant passenger to enjoy the ride.
It’s easy to use! Let’s get started!
Happy Cruising!
GRACO®, BRITAX® AND UPPABABY®
INFANT CAR SEAT ADAPTER
TM
Veer Gear, LLC
Customer Service
3423 Piedmont Rd. NE
Atlanta, GA 30305
1 470 344 3200
goveer.com

LET’S
GET
STARTED
THE CARGO WE CARRY IN OUR INFANT CAR SEAT
IS PRECIOUS. PLEASE TAKE THE TIME TO READ
THESE INSTRUCTIONS CAREFULLY TO ENSURE
THE SAFETY OF YOUR CHILD. IF ANY HARDWARE
IS MISSING OR GETS LOST, DO NOT USE! PLEASE
CONTACT VEER GEAR CONSUMER SUPPORT
IMMEDIATELY AT [e-mail] FOR
REPLACEMENT PARTS. FOR ANY QUESTIONS,
PLEASE SEE INSTRUCTIONAL VIDEOS ON
GOVEER.COM TO CONFIRM ASSEMBLY.
This adapter is designed to allow your
infant car seat to be located in any of four
positions:
01.
Installing the Infant Car Seat Adapter
Position the adapter so that the grey dots on each adapter face the
closest seat back. Then lower the adapter onto the sidewalls so that
the latches are centered on the black sewn lines (g 1) on the top
side of each side wall, which centers it above the alignment pins
closest to the seat back (g 2).
A Front Forward B Rear Forward C Front Backward D Rear Backward
Fig 1 Fig 2

Rotate the latches downward into place until the green zone on
each grey locking button becomes clearly visible (g 3). Your
adapter is correctly installed only when the green zone on each grey
locking button is visible. If the green zone is not visible, your
adapter is NOT CORRECTLY INSTALLED (g 4). Repeat on other
side.
02.
Installing the Infant Car Seat to Adapter
(Never Attach with Infant in Seat)
Lower the infant seat down into the adapter until you hear a loud
“SNAP” signifying the infant seat is completely installed (g 1).
Ensure each car seat latch is properly engaged by lifting up on infant
seat to verify proper and complete attachment.
Seat is now ready for Infant.
03.
Removing Infant Car Seat Adapter
from Cruiser
Depress the grey locking button on each tower and rotate the
attachment levers outward (Fig 1). Lift away from frame and store
safely for later use (Fig 2).
Fig 1
Fig 1 Fig 2
Fig 3 Fig 4
INCORRECT!
No Green Visible
CORRECT!
Green Zone Visible !

WARNING:
NEVER LEAVE CHILDREN UNATTENDED. FAILURE TO
FOLLOW THESE WARNINGS AND INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY OR DEATH:
• NEVER USE INFANT CAR SEAT ADAPTER AS A HANDLE TO LIFT THE
CRUISER.
• NEVER PLACE INFANT IN CAR SEAT BEFORE YOU HAVE FIRMLY
ATTACHED THE SEAT TO THE CRUISER.
• NEVER REMOVE INFANT CAR SEAT FROM THE CRUISER FRAME WITH
INFANT IN SEAT.
• ALWAYS VERIFY THE ADAPTER IS CORRECTLY INSTALLED ONTO THE
CRUISER BEFORE INSTALLING AN INFANT CAR SEAT
• WEIGHT LIMITATIONS: RECOMMENDED ONLY FOR INFANTS WITHIN
THE HEIGHT AND WEIGHT LIMITS OF INFANT CAR SEATS SPECIFIED IN
THE INFANT CAR SEAT MANUAL.
• ALWAYS USE INFANT CAR SEAT RESTRAINT SYSTEM AS RECOM-
MENDED BY MANUFACTURER
04.
Cleaning Instructions
Wipe with a damp cloth and dry thoroughly. For a more thorough
cleaning, rinse with a hose or hand wash with a mild detergent and
dry thoroughly. Do not use abrasives. Do not put in dishwasher.