VENTURE DESIGN Padang 18010-680 User manual

MONTERINGSANVISNING
ASSEMBLY INSTRUCTIONS
PADANG SOFFBORD
Art. nr 18010-680

2020
18010-680
Assembly Instruction
Thankyou for purchasing this quality product.Be sure to check all packing
material carefully for small part, which may have come loose inside the carton
during shipment.Count all the parts and hardware, compare with partlist below
to be sure all part are present.
1. Lay the table face down on aclean, flat, soft surface and use cution during
assembly to prevent scratching the table top.
2. Follow the instruction and steps illustrated.Please do not tighten the bolt on
any side on table leg before the table is fully set up.
Tighten all screws 20% before
cross-tighten all screws until
fully assembled. Note that if
screws are tightened too much
or by screw driver, damages in
the product may appear!
Note: Improper use, improper assembly and mishandling may lead to defects / cracks appearing
OBS! : Oaktsam hantering och montering kan leda till skador / sprickor
Hinweis: Unsachgemäße Verwendung, unsachgemäße Montage und unsachgemäße Handhabung
können zu Defekten / Rissen führen
Tighten all screws 20% before
cross-tighten all screws until
fully assembled. Note that if
screws are tightened too much
or by screw driver, damages in
the product may appear!
Note: Improper use, improper assembly and mishandling may lead to defects / cracks appearing
OBS! : Oaktsam hantering och montering kan leda till skador / sprickor
Hinweis: Unsachgemäße Verwendung, unsachgemäße Montage und unsachgemäße Handhabung
können zu Defekten / Rissen führen