Verilux VA04 User manual

Sound
Radio
Display
Sleep
Off
Set
Alarm
VA05F

2
Dear Customer,
Thank you for purchasing the Verilux Rise & Shine® Natural Wake-
Up Light. You have received an innovative and quality manufactured
product, backed by a one-year limited warranty.
Many other healthy lighting products are available through our catalog
and online. To request a free copy of our catalog, call our toll-free
number 1-800-786-6850. You may also visit us on the web at
www.verilux.com to learn more about all our quality Verilux products.
As a Verilux customer, your satisfaction means everything to us. We
look forward to serving you now and in the future.
Have a bright day!
Nicholas Harmon
President, Verilux, Inc.

3
Table of Contents
Important Safety Instructions ........................................ 4
General Precautions ............................................... 5
FCC Compliance .................................................. 6
Features ......................................................... 6
Set-up Instructions
Unpacking .................................................. 7
Selecting a Location .......................................... 7
Display and Controls ............................................... 8
Operating Instructions
Turning on the Lamp ......................................... 11
Turning off the Lamp ......................................... 11
Playing Natural Soundscapes .................................. 11
Setting the Clock ............................................ 11
Listening to the Radio ........................................ 11
Connecting the External FM Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Setting the Alarm and Sleep Cycle Brightness . . . . . . . . . . . . . . . . . . . . . 12
Displaying Alarm Settings ..................................... 13
Snooze .................................................... 13
Sunrise Simulator ........................................... 13
Starting a Sleep Cycle ........................................ 13
Display Dimmer ............................................. 13
Replacing the Bulb ............................................... 14
Troubleshooting
Resetting the Rise & Shine®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Care and Maintenance
Cleaning ................................................... 15
Technical Specifications ........................................... 15
Warranty ....................................................... 16

4
Important Safety Instructions
CAUTION:
THIS DEVICE MUST BE CONNECTED TO A MAINS SOCKET OUTLET WITH A
PROTECTIVE EARTHING CONNECTION.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY
COMPONENTS. THERE ARE NO SERVICEABLE PARTS INSIDE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
dangerous voltage within the system enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle, as marked on
the system, is intended to alert the user to the presence of important
operating and maintenance instructions in this installation guide.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL
INJURY:
• Read these instructions before using this lamp.
• Keep these instructions for future reference.
• Heed all warnings.
• Follow all instructions.
• Do not use this appliance near water.
• Refer all servicing to qualified service personnel.
• Servicing is required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
• The mains plug is used as the disconnecting device, which shall remain
readily operable.
• Turn off/unplug and allow to cool before replacing bulb, cleaning or other
maintenance.
• Light bulbs get HOT quickly! Do not touch the bulb while the lamp is on.
• Do not look directly at the lighted bulb.
• Do not operate the lamp in close proximity to flammable or combustible
vapors, such as aerosol (spray) products or where oxygen is being
administered.
• Use only the type of bulb and maximum wattage indicated by the
manufacturer.

5
Important Safety Instructions — continued
• Never cover the bulb when it is in operation.
• Do not use this lamp in damp/humid or wet locations.
• For indoor use only.
• Clean only with dry cloth. Do not use any chemical solvents or detergents.
• Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
• Do not place near any heat sources such as radiators, heat registers, stoves
or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding plug
has two blades and a third grounding prong. The wider blade or third prong
is provided for your safety. If the provided plug does not fit in your outlet,
consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles and the point where they exit from the lamp.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this lamp during lightning storms or when unused for long periods.
• Only use a bulb rated 120 VAC, 60 Watts.
• If the lamp has been damaged in any way, such as the power cord or plug
is damaged, liquid has been spilled or objects have fallen into the lamp, the
lamp has been exposed to rain or moisture, does not operate normally, or has
been dropped, it should not be operated.
• Modifications not authorized by the manufacturer will void the warranty and
may result in personal injury.
SAVE THESE INSTRUCTIONS
General Precautions
• Avoid placing this lamp in areas that are exposed to direct sunlight or close to
heat-radiating products, such as heaters. Do not place the lamp on the top of
appliances that radiate heat.
• Avoid placing the lamp in areas that are dusty, humid/moist, lack ventilation or
are subject to constant vibration.
• Not for use with light dimmers, timers, motion detectors or extension cords.
• Do not use any lubricating agent in the bulb assembly.
• Close supervision is necessary when this appliance is used by or near
children or disabled persons.

6
General Precautions — continued
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The Verilux® Rise & Shine® Natural Wake-Up Light aligns the body’s circadian
rhythms that regulate normal sleeping and waking patterns. Synchronized sleep
and wake programs provide the body with cues to fall asleep naturally, sleep
soundly and wake refreshed and revitalized. The harmonious blend of light and
sound therapy naturally directs the body to energized waking and healthy sleep
patterns.
Features
WARNING: This lamp is supplied with a shade designed specifically
for use with this product. Use of any other shade other than the one
supplied by the manufacturer may pose a SAFETY HAZARD.
CAUTION: If outer glass of the bulb breaks, avoid touching any metal
components due to potential shock. The bulb may continue to light,
however, immediately discontinue use, turn power off and remove the
bulb. Let bulb cool before removal to avoid potential burn.

7
• Light and sound gradually increase to wake you gently, feeling refreshed and
re-energized
• Wake to your choice of four natural soundscapes or your favorite FM radio
station
• Select from 20 levels of light intensity
• Sleep mode feature gradually dims the light over a 5, 15, 30 or 60 minute
period of time
• Dual alarms with snooze feature
Features — continued
Set-up Instructions
Unpacking
Please check the shipping carton for the following items:
• Verilux Rise & Shine® Natural Wake-Up Light
• External FM Antenna
• Instruction Manual
• A19 120V 60W E26 Clear Bulb (located inside lamp shade)
Note: With the unit not plugged into a power outlet, open the lamp shade by
depressing the button on rear of lamp and gently lifting the shade off the base.
Install bulb by screwing securely into socket. Replace the shade by aligning it
with the base and pressing down until the shade clicks into place.
Selecting a Location
• Place your Rise & Shine on a table or other flat surface near your bedside.
• For best performance, place your Rise & Shine within two feet of a wall and
avoid placing directly in a corner.
Note: Avoid placing your Rise & Shine on a metal surface, which could interfere
with FM reception.
Note: Avoid placing this lamp in areas that are exposed to direct sunlight or close
to heat-radiating products, such as heaters. Do not place the lamp on the top of
appliances that radiate heat.

8
Sound
Radio
Display
Sleep
Off
Set
Alarm
11
1056
4
3
2
9
1
8
7
Sound
Radio
Display
Sleep
Off
Set
Alarm
Display and Controls
1. Light Brightness Buttons
2. Volume Buttons
3. Sound Button
4. Radio Button
5. Back and Forward
Buttons
6. Set Button
7. Sleep Button
8.
Display
Button
(Off / Normal / Bright)
9. Off Button
10. Alarm Button
11. LCD Display
Note: External antenna jack
and button to release shade
are located on the rear
panel of the Rise & Shine®.

9
Display and Controls — continued
1. Light Brightness Buttons
The Up and Down light brightness buttons are used
to set the highest final brightness of the Wake Cycle or
the initial (highest) brightness of the Sleep Cycle. The
brightness can be set to any one of 20 levels.
The brightness buttons are also used to adjust the
brightness when you use the Rise & Shine® as a lamp.
2. Volume Buttons
The Up and Down volume buttons are used to set
the highest final volume of the Wake Cycle or the initial
volume of the Sleep Cycle. The volume can be set to
any one of 20 levels.
3. Sound Button
When used with other Alarm settings, the Sound button
Sound lets you choose one of four natural soundscapes
by pressing the button repeatedly to select a particular
sound. If pressed when not setting an alarm, the Sound
button begins playing the last selected sound. You can
select a particular sound by pressing the Back and
Forward buttons.
Pressing the Sound button again, or pressing the Off
button Off turns off the soundscape.
4. Radio Button
The Radio button Radio turns the FM radio on or off.
5. The Back and Forward Buttons
The Back button and the Forward button
are used to set the time of day, the alarm time or to
advance between options.

10
Display and Controls — continued
6. Sleep Button
Pushing the Sleep button Sleep begins a Sleep Cycle
with a default time of 5 minutes. Pressing the Sleep
button repeatedly allows you to select a Sleep Cycle
length of 0 (off), 5, 15, 30 or 60 minutes. The Sleep
Cycle you’ve chosen begins about two seconds after
your final button press.
7. Display Button (Off / Normal / Bright)
The Display button
Display
controls the brightness
of the Rise & Shine® LCD display backlight. Press
repeatedly to choose between Off, Normal and Bright.
If the backlight is off, pressing any other button will
momentarily set the backlight to normal.
8. Off Button
The Off button
Off
turns the FM radio, natural
soundscapes and the light off. The Off button can also
be used to stop a Sleep or Wake Cycle.
9. Alarm Button
Pressing the Alarm button
Alarm
cycles the display between:
• Alarm 1 Displayed (AL1)
• Alarm 2 Displayed (AL2)
• Alarm 1 and Alarm 2 Displayed (AL1 and AL2)
10. LCD Display
Natural Soundscape Icons
Real Time Clock
FM Frequency
Alarm 1 Icon
Alarm 2 Icon
Sleep Delay
Time Icons
Audio Light

11
Operating Instructions
Turning On the Lamp
To turn on the lamp:
• Press the top of the Rise & Shine® lamp shade on the “Light/
Snooze” label.
You may now adjust the brightness using the up and down
brightness buttons located to the right of the display.
Note: Any change you make to the lamp’s brightness becomes
the new “default” brightness.
Turning Off the Lamp
To turn off the lamp:
• Press the top of the Rise & Shine lamp shade on the “Light/Snooze” label.
Playing a Natural Soundscape
Press the Sound button to play one of four nature
sounds. Press the Back or the Forward button
repeatedly to cycle between the four available sounds. If
the Sound button is pressed when not setting an alarm, the
button begins to play the last selected sound. Pressing
the Sound button again or pressing the Off button turns off
the nature sound.
Setting the Clock
1. Press and hold the Set button for 3 seconds to enter
the clock setting mode. The clock digits will blink.
2. Press and hold the Back button or the Forward
button to adjust the time. After your last button
press, the display will continue to blink for a few
seconds, then display the newly set time.
Listening to the Radio
To listen to the FM radio:
1. Press the Radio button to turn on the radio.
2. Use the Back button or the Forward button
to select a frequency. If you press and hold the
Back button or the Forward button, the radio will stop on the next
strongest frequency.
3. Use the Up and Down volume buttons to adjust the volume.
4. To turn the radio off, press the Radio button or press the Off button.
Press to
turn on

12
To improve FM reception, you may wish to use the included external FM antenna.
Connecting the External FM Antenna:
1. Plug the 3.5 mm (1/8") plug of the FM antenna into the EXTERNAL ANTENNA
jack on the rear panel.
2. Straighten the antenna and position to establish optimum reception.
Setting the Alarm
Note: It is helpful to read through the entire section on
setting the alarm before you begin.
1. Press and hold the Set button for 3 seconds to enter
the clock setting mode. Press Set again to enter the
alarm setting mode.
• The alarm icons and sleep icon will flash on the left of the display. They
are, from top down: AL1 (Alarm 1), AL2 (Alarm 2) and Sleep . You may
set two alarms, each with a specific alarm time. You may also choose a
brightness level for the start of the sleep cycle.
2. Select AL1 or AL2 or by pressing the Back button or the Forward
button repeatedly. Press the Set button to confirm the desired selection. The
chosen icon will flash.
3. If AL1 or AL2 is chosen, press the Back button or the Forward
button repeatedly to adjust the alarm’s time. Press Set to confirm.
4. Press the Back button or the Forward button to select between FM
radio mode or natural soundcape mode and press the Set button to confirm.
• When the FM radio mode is selected, press the Back button or the
Forward button repeatedly to search for the desired radio station.
Then press “set” to the selected radio station.
• When the natural soundcape mode is selected, press the Back
button or the Forward button repeatedly to select bird, frog, river or
wave. Then press Set to confirm the desired soundcape.
5. The Audio icon will flash and the FM Radio or selected natural soundcape
will play. Press the Back button or the Forward button repeatedly to
adjust the alarm volume from 0 to 20. Press Set to confirm.
6. The light brightness icon will flash and the light will turn on. Press the Back
button or the Forward button on the right side repeatedly to adjust
the light brightness and press Set to confirm and exit.
Setting Sleep Cycle Brightness
1. Press and hold the Set button for 3 seconds to enter the clock setting mode.
Press Set again to enter the alarm setting mode.
Operating Instructions — continued

13
Operating Instructions — continued
2. Select by pressing the Back button or the Forward button
repeatedly. Press the Set button to confirm the desired selection. The chosen
icon will flash.
3. When the Sleep icon is chosen, the lamp brightness will increase to the last
level set. Use the Back button or the Forward button to set a new
final brightness level for the Sleep Cycle.
• Press the Set button to confirm.
Displaying Alarm Settings
Press the Alarm button repeatedly to cycle between displaying:
• AL1 – Alarm 1 Setting
• AL2 – Alarm 2 Setting
• Both Alarms
Snooze
When the alarm sounds, you may press down on the top of the
Rise & Shine® – as you would a button – to Snooze.
Sunrise Simulator
Beginning 15 minutes before the alarm set time, the light will
gradually increase in intensity to simulate sunrise. There are 20
possible light levels. The final brightness level, which may be any
level between 1 and 20, is set as described on page 12 under Setting the Alarm
and Sleep Cycle Brightness.
Starting a Sleep Cycle
A sleep cycle simulates diminishing sunset lighting by beginning with the lamp on
maximum brightness, or the highest brightness you previously set, with the light
progressively dimming for the duration of the cycle until the lamp is off at the end
of the cycle.
You may start a sleep cycle whenever you wish:
• Press the Sleep button to begin a sleep cycle.
• The minutes remaining in the sleep cycle are shown on the display.
• Press the Sleep button repeatedly to choose 0, 5, 15, 30 or 60 minutes.
• To manually end the Sleep cycle, press the
Off
Button, or press the
Sleep
button
repeatedly until you reach “00”. You will need to manually turn the lamp and/or
radio on, if you wish to do so.
Display Dimmer
To adjust the LCD display brightness to Off, Normal or Bright setting, press the
Display
button repeatedly for the desired brightness.
Press to
Snooze

14
Problem
The device is not working
correctly.
No light.
No radio or no sound.
Alarm doesn’t function.
Unplug from power, wait 30 seconds, then
plug in again.
• Press the buttons.
• Replace the bulb if needed.
• Verify that the lamp icon is shown on the
display. If it is not shown, press down on
the lamp shade to turn on the lamp.
• If the Radio icon is not shown on the
display, press Radio .
• Increase volume.
• Attach the external antenna and vary the
antenna location for best reception.
• Verify the correct AM/PM setting.
• Verify that the alarm is activated (an alarm
is activated if both the alarm, AL1 or AL2,
and the time are shown).
Resetting the Rise & Shine
Troubleshooting
Your Rise & Shine® uses a standard 60 Watt incandescent bulb.
To replace the bulb:
1. Make sure the lamp is unplugged and enough time has passed
to allow the bulb to cool.
2. Press the release button at the rear of the lamp shade and gently
pull the shade up to remove.
3. Unscrew the bulb and replace with a standard 60 Watt
incandescent bulb.
4. Align the shade and press down until the rear of the shade clicks
into place.
Note: Do not use a bulb rated higher than 60 watts.
Replacing the Bulb

15
Rise & Shine Natural Wake-Up Light
Overall Dimensions
Weight 2.4 lbs
Dimensions 8.75" x 10.25" x 6.75"
LCD Display
Dimensions 2.75" x 1.75"
Environment
Operating Temperature: 15°C to 35°C; 56°F to 95°F
Storage Temperature: 0°C to 40°C; 32°F to 104°F
Relative Humidity: 5% to 95% non-condensing
Bulb
Maximum 60 Watt Incandescent
Power
Input Power: 120 VAC, 60Hz
ETL Listed
Cord/Plug
Plug Type: Polarized/USA two prong
Cord Length: 72" (6 Feet)
Intellectual Property
Patent: 6,236,622 and D553,777
Trademark: Rise & Shine®
Safety
ETL Listed
Warranty
1–Year Limited
Technical Specifications
Cleaning
Disconnect the Rise & Shine® from the power outlet. Use only a dry, soft cloth to
clean. Do not use any chemical solvents or detergents.
Care and Maintenance

VA05F-MAN-Rev12
Printed in China for Verilux, Inc.
© Copyright 2010 Verilux, Inc. All rights reserved.
Please visit our web site at www.verilux.com or call our Customer Service Department at
1-800-786-6850
Representatives are available 8 a.m. – 10 p.m. M – S, 9 a.m. – 8 p.m. Sunday EST
340 Mad River Park, Waitsfield, VT 05673
One Year Limited Warranty
ATTENTION! ONCE OPENED, PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
WHERE IT WAS PURCHASED FOR REPAIR OR REPLACEMENT!
Many questions may be answered by visiting www.verilux.com, or you may call our Customer
Service Department at 800-786-6850 during normal business hours.
This limited warranty is provided by: Verilux, Inc., 340 Mad River Park, Waitsfield, VT 05673
Verilux warrants this product to be free from defects in material and workmanship for a period
of one year from the date of the original retail purchase from Verilux or an authorized Verilux
distributor. Proof of purchase is required for all warranty claims. During the limited warranty
period, Verilux, Inc. will, at its option, repair or replace defective parts of this product, at no
charge to the customer, subject to the following limitations: This limited warranty does not
include any postage, freight, handling, insurance or delivery fees. This warranty does not cover
damage, defect or failure caused by or resulting from accident, external destruction, alteration,
modification, abuse, misuse or misapplication of this product.
This warranty does not cover damage to the product resulting from return shipping or handling.
The use of shipping insurance is recommended to help protect your product.
Return Authorization is required for all returns. To obtain a Return Authorization, please
contact the Verilux Customer Service Department at 800-786-6850.
If, during the first year of ownership, this product fails to operate properly, it should be returned
as specified at www.verilux.com/warrantyreplacement or as instructed by a Verilux customer
service representative at 800-786-6850.
Note: Verilux recommends using a quality surge suppressor on all electronics equipment.
Voltage variations and spikes can damage electronic components in any system. A quality
suppressor can eliminate the vast majority of failures attributed to surges and may be
purchased at electronics stores.
Due to ongoing improvements, actual product may have slight variations from the product described in this manual.

Sound
Radio
Display
Sleep
Off
Set
Alarm
VA05F

2
Chère cliente/Cher client,
Merci d’avoir acheté la lampe de réveil naturel Rise & Shine® de
Verilux. Vous avez reçu un produit innovant de qualité, couvert par une
garantie limitée d’un an.
Beaucoup d’autres produits d’éclairage sains sont disponibles sur
notre catalogue et en ligne. Pour obtenir un exemplaire gratuit de
notre catalogue, veuillez composer le numéro gratuit 1-800-786-6850.
Vous pouvez également visiter notre site Web à www.verilux.com pour
en apprendre davantage sur tous nos produits de qualité Verilux.
En tant que client Verilux, nous accordons beaucoup d’importance à
votre satisfaction. Nous sommes fiers de pouvoir être à votre service
aujourd’hui et demain.
Bonne journée lumineuse!
Nicholas Harmon
Président, Verilux, Inc.

3
Table des matières
Directives importantes de sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Précautions générales .............................................. 5
Conformité à la FCC ............................................... 6
Caractéristiques .................................................. 6
Instructions pour la mise en marche
Déballage ................................................... 7
Choisir un emplacement ....................................... 7
Affichage et commandes ........................................... 8
Mode d’emploi
Allumer la lampe ............................................ 11
Éteindre la lampe ............................................ 11
Écouter un son de la nature .................................... 11
Réglage de l’horloge ......................................... 11
Écouter la radio ............................................. 11
Branchement de l’antenne FM externe . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Réglage du réveil et de la luminosité pendant le cycle d’endormissement 12
Affichage des réglages de l’alarme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Rappel d’alarme ............................................ 13
Simulation du lever du soleil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Lancement d’un cycle de sommeil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Variation de la luminosité de l’affichage . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Remplacement de l’ampoule ....................................... 14
Dépannage
Nouveau réglage de la lampe Rise & Shine® ....................... 14
Soins et entretien
Nettoyage ................................................. 15
Caractéristiques techniques ........................................ 15
Garantie ........................................................ 16

4
Instructions importantes de sécurité
AVERTISSEMENT :
CET APPAREIL DOIT ÊTRE BRANCHÉ À UNE PRISE DE COURANT ÉQUIPÉE
D’UNE MASSE.
POUR RÉDUIRE LES RISQUES D’ÉLECTROCUTION, NE DÉMONTEZ PAS LES
DIFFÉRENTS COMPOSANTS. IL N’EXISTE AUCUNE PIÈCE RÉPARABLE PAR
L’UTILISATEUR À L’INTÉRIEUR DE L’APPAREIL.
POUR RÉDUIRE LES RISQUES D’INCENDIE OU D’ÉLECTROCUTION,
N’EXPOSEZ PAS EXPOSER L’APPAREIL À LA PLUIE OU L’HUMIDITÉ.
Le symbole de l’éclair dans un triangle équilatéral alerte l’utilisateur
de la présence de tensions dangereuses dans le boîtier de l’appareil
suffisamment élevées pour provoquer une électrocution.
Le point d’exclamation dans un triangle équilatéral, tel qu’affiché sur
l’appareil, attire l’attention de l’utilisateur sur la présence d’instructions
importantes de fonctionnement et d’entretien dans ce manuel
d’installation.
AVERTISSEMENT : AFIN DE RÉDUIRE LE RISQUE D’INCENDIE,
D’ÉLECTROCUTION OU DE BLESSURE :
• Lisez ces instructions avant d’utiliser la lampe.
• Conservez ces instructions pour vous y référer ultérieurement.
• Tenez compte de tous les avertissements.
• Suivez toutes les instructions.
• Ne pas utiliser cet appareil près de l’eau
• Confier toute réparation à un personnel qualifié.
• Un entretien est requis lorsque l’appareil a été endommagé de quelque
façon que ce cordon d’alimentation ou la fiche est endommagé, liquide a été
renversé ou des objets sont tombés dans l’appareil, l’appareil a été exposé à
la pluie ou à l’humidité, ne fonctionne pas normalement , Ou s’il est tombé.
• La prise secteur est utilisée comme dispositif de déconnexion, qui doit rester
facilement accessible.
• Éteignez, débranchez et laissez refroidir l’appareil avant de remplacer
l’ampoule, de le nettoyer ou d’en effectuer l’entretien.
• Les ampoules S’ÉCHAUFFENT rapidement. Ne touchez pas l’ampoule
lorsque la lampe est allumée.
• Ne regardez pas directement l’ampoule allumée.
• N’utilisez pas la lampe à proximité de vapeurs ou de gaz inflammables,
comme les aérosols (vaporisateurs), ni à proximité d’une bouteille d’oxygène.
• Utilisez uniquement le type d’ampoule et la puissance maximale indiqués par
le fabricant.
• Ne couvrez jamais l’ampoule lorsqu’elle est allumée.