Vernier Go Wireless Series User manual

Vernier Go Wireless®
Electrode Amplifier
Order Code GW-EA or GW-EA-NP
The Go Wireless Electrode Amplifier is a wireless mV
and pH amplifier that connects to Vernier electrodes
and compatible third-party BNC electrodes.
What is Included with Go Wireless Electrode Amplifier
Go Wireless Electrode Amplifier
USB Charging Cable (not included in GW-EA-NP)
This user guide
Go Wireless app (free download from the App Store)
Charging Go Wireless Electrode Amplifier
Connect Go Wireless Electrode Amplifier to the included USB Charging Cable and
any USB device for two hours.
You can also charge up to eight Go Wireless Electrode Amplifiers or Go Wireless
Temp probes using our Go Wireless Charging Station, sold separately (order code:
GW-CRG). An LED on each Go Wireless Electrode Amplifier indicates charging
status. A blue light indicates it is still charging. When the light goes off, it is finished
charging.
2
Supported Devices
Go Wireless Electrode Amplifier can be used with supported mobile devices* that
have Bluetooth®Smart support and one of our apps.
iPad®(3rd generation or newer), iPad mini, and iPad Air
iPhone®(4S or newer)
iPod®touch (5th generation or newer)
LabQuest 2 (model LQ2-LE), see www.vernier.com/til/3085/
For Android™devices, see www.vernier.com/gw-app
Data-Collection Apps
Go Wireless Electrode Amplifier can be used with supported mobile devices* that
have Bluetooth Smart support and one of our apps.
Go Wireless app (free iOS app) Available as a free download from the App
Store, use this app to see a live digital readout from the sensor, record data for
real-time graphing, and export data for further analysis in Graphical Analysis™
for iPad and other applications. For more information or to download the app, see
www.vernier.com/gw-app
LabQuest 2 app (version 2.4 or newer)
NOTE: Vernier products are designed for educational use. Our products are not
designed nor are they recommended for any industrial, medical, or commercial
process such as life support, patient diagnosis, control of a manufacturing process, or
industrial testing of any kind.
Specifications
Radio 2.4 GHz Bluetooth 4.0, Low Energy
Battery 100 mA Li-Poly
Units pH or mV
Input range ±1000 mV or 0 - 14 pH
Accuracy (mV) ± 10 mV (factory calibration)
Accuracy (pH) ± 0.5 pH (factory calibration)
± 0.1 pH (user calibration)
Battery life (continuously on,
1 sample per second) 3 days
Input range ±1000 mV
Temperature range –10 to 45ºC
Maximum wireless range 30 m unobstructed
How Go Wireless Electrode Amplifier Works
The electrode amplifier handle is a circuit that allows a standard BNC electrode to be
monitored by a lab interface wirelessly.
Go Wireless Electrode Amplifier has one button and three LEDs.
Button
Press the button once to turn on Go Wireless Electrode Amplifier. A red LED
indicator flashes when the unit is on.
*For a full list of supported mobile devices, see www.vernier.com/gw-app

3
Press and hold the button for more than three seconds to put Go Wireless
Electrode Amplifier into sleep mode. The red LED indicator stops flashing when
sleeping and LED light is off.
Press and hold the button for more than eight seconds to reset the system. This
should not be necessary in normal operation.
Blue LED
Indicates charging status when Go Wireless Electrode Amplifier is connected to the
Charging Cable or Charging Station.
On – charging in progress
Off – charging is complete
Red LED Flashing
Indicates Go Wireless Electrode Amplifier is awake and ready to connect.
Green LED Flashing
Indicates Go Wireless Electrode Amplifier is connected and taking data.
Red and Green LED Off
Indicates Go Wireless Electrode Amplifier is in the lowest power sleep mode.
Collecting Data
Collecting Data with Go Wireless App
1. Press the power button on Go Wireless Electrode Amplifier to turn it on. The
LED on the sensor will flash red.
2. Launch the app. Select your Go Wireless Electrode Amplifier from the list of
available sensors. When the sensor is paired with the app, the sensor LED will
flash green.
Note: When you first connect to Go Wireless Electrode Amplifier, the units
shown are pH. To collect data in mV, tap on the radio icon in the upper right
corner. Under Units, select mV. This setting will be remembered until it is
changed again.
3. Place the sensor tip into a beaker containing your sample. It is recommended that
you use a utility clamp or Electrode Support to fasten the Go Wireless Electrode
Amplifier and its electrode to a ring stand, as shown on next page for a pH
electrode.
4
4. Tap Keep to store a data point into the table. You can change the sample
description or add a note here. Tap Done.
5. Rinse the electrode with distilled water before reusing it.
6. Collect additional data as desired. Rows will continue to add to the table.
Collecting Data with LabQuest 2 App
1. Press the power button on Go Wireless Electrode Amplifier to turn it on. The
LED on the sensor will flash red.
2. Choose New from the File menu. On the Meter screen, choose Go Wireless Setup
from the Sensors menu. Select your Go Wireless Electrode Amplifier from the list
of available sensors. When the sensor is paired with the software, the sensor LED
will flash green.
Note: When you first connect to Go Wireless Electrode Amplifier, the units
shown are pH. To collect data in mV, tap on the red box on the Meter screen,
select Go Wireless, then select Set Units, then mV. This setting will be
remembered until it is changed again.
3. Collect data as desired.
When you are finished making measurements, rinse the electrode with distilled
water. Store the electrode according to the manufacturer instructions. Make sure you
disconnect the Go Wireless Electrode Amplifier from its Bluetooth source.
Calibration Information
If you are connecting an ORP or ISE electrode, it is not necessary to calibrate since it
is a direct reading off of the electrode. Make sure you have switched units to mV as
described above.
If you are connecting a pH electrode, it is recommended to calibrate the Go Wireless
Electrode Amplifier once an electrode is attached via BNC. See the Go Wireless pH
user guide for additional information: http://www.vernier.com/gw-ph/
Battery Information
Go Wireless Electrode Amplifier contains a small lithium-ion battery in the handle.
The system is designed to consume very little power and not put heavy demands on
the battery. Although the battery is warranted for one year, the expected battery life
should be several years. Replacement batteries are available from Vernier (order
code: GW-BAT-100).
Use only the Vernier Go Wireless Charging Cable (order code: GW-CB) or
Go Wireless Charging Station (order code: GW-CRG) to charge the battery.
Storage and Maintenance of Go Wireless Electrode Amplifier
To store Go Wireless Electrode Amplifier for extended periods of time, put the
device in sleep mode by holding the button down for at least three seconds. The red
LED will stop flashing to show that the unit is in sleep mode. Over several months,
the battery will discharge but not be damaged. After such storage, charge the device
for a few hours and the unit will be ready to go.
Exposing the battery to temperatures over 35C (95F) will reduce its lifespan. If
possible, store Go Wireless Electrode Amplifier in an area that is not exposed to
temperature extremes.

5
Replacement Parts
Vernier Software & Technology
Part Order code
Go Wireless Charging Cable GW-CB
Go Wireless pH (electrode only) GW-PH-NP
Go Wireless Battery GW-BAT-100
Related Products
Go Wireless Charging Station (order code: GW-CRG)
Multi-sensor charging capability for your Go Wireless Electrode Amplifiers. The
Go Wireless Charging Station is the perfect solution for charging and storing your
Go Wireless Electrode Amplifier. For more information, see www.vernier.com/gw-
crg
Disposal Instruction
When disposing of this electronic product, do not treat it as household waste. Its
disposal is subject to regulations that vary by country and region. This item should
be given to an applicable collection point for the recycling of electrical and
electronic equipment. By ensuring that this product is disposed of correctly, you help
prevent potential negative consequences on human health or on the environment.
The recycling of materials will help to conserve natural resources. For more detailed
information about recycling this product, contact your local city office or your
disposal service.
The symbol, shown here, indicates that this product must not be
disposed of in a standard waste container.
Warranty
Vernier warrants this product to be free from defects in materials and workmanship
for a period of five years from the date of shipment to the customer. This warranty
does not cover damage to the product caused by abuse or improper use. The battery
is covered by a one-year warranty.
6
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may cause undesired operation
RF Exposure Warning
The equipment complies with RF exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must not
be co-located or operating in conjunction with any other antenna or transmitter.
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to
operate the equipment.
IC Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Industry Canada - Class B This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set
out in the interference-causing equipment standard entitled “Digital Apparatus,” ICES-003 of Industry Canada. Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device. To reduce potential radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.
RF exposure warning: The equipment complies with RF exposure limits set forth for an uncontrolled environment. The antenna(s) used for
this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’appareil doit accepter tout interférence
radioélectrique, même si cela résulte à un brouillage susceptible d’en compromettre le fonctionnement.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de Classe B prescrites dans
la norme sur le matériel interférant-brouilleur: “Appareils Numériques,” NMB-003 édictée par industrie Canada. L’utilisation est
soumise aux deux conditions suivantes: (1) cet appareil ne peut causer d’interférences, et (2) cet appareil doit accepter toutes interférences,
y comprises celles susceptibles de provoquer un disfonctionnement du dispositif. Afin de réduire les interférences radio potentielles pour les
autres utilisateurs, le type d’antenne et son gain doivent être choisie de telle façon que l’équivalent de puissance isotrope émis (e.i.r.p) n’est
pas plus grand que celui permis pour une communication établie. Avertissement d’exposition RF: L’équipement est conforme aux limites
d’exposition aux RF établies pour un environnement non supervisé. L’antenne (s) utilisée pour ce transmetteur ne doit pas être jumelés ou
fonctionner en conjonction avec toute autre antenne ou transmetteur.
Vernier Software & Technology
13979 S. W. Millikan Way Beaverton, OR 97005-2886
Toll Free [phone] [phone] FAX [phone]
[email protected] www.vernier.com
Rev. 10/20/2014
Go Wireless and Graphical Analysis are our trademarks in the United States. All other marks not owned by us that appear
herein are the property of their respective owners, who may or may not be affiliated with, connected to, or sponsored by
us.
Printed on recycled paper.