Versiton SF70460MP User manual

-1-
SF70460MP
4-Port 10/100/1000Base
Managed PoE/PoE+
Switch
Installation Guide
v1.00
© June 2016
VERSITRON, Inc.
83Albe Drive / Suite C
Newark, DE 19702
www.versitron.com

-2-
PROPRIETARY DATA
All data in this manual is proprietary and may not be disclosed,
used or duplicated, for procurement or manufacturing purposes,
without prior written permission by VERSITRON.
VERSITRON LIFETIME WARRANTY
All VERSITRON products are covered by a Lifetime Warranty against defects in materials and workmanship.
This coverage is applicable to the original purchaser and is not transferable.
We repair, or at our option, replace parts/products that, during normal usage and operation, are proven to be
defective during the time you own the products, provided that said products and parts are still manufactured
and/or available. Such repair/replacement is subsequent to receipt of your product at our facility and our
diagnostic evaluation and review of the unit. Advance replacements are not provided as part of the warranty
coverage.
This warranty does not cover damage to products caused by misuse, mishandling, power surges, accident,
improper installation, neglect, alteration, improper maintenance, or other causes which are not normal and
customary applications of the products and for which they were not intended. No other warranty is expressed
or implied, and VERSITRON is not liable for direct, indirect, incidental or consequential damages or losses.
In the unlikely event a warranty issue should arise, simply contact us at 302-894-0699 or 1-800-537-2296 or via
email at [e-mail] to obtain a Return Material Authorization (RMA) number, along with instructions
for returning your product.

-3-
Copyright VERSITRON, Inc. All rights reserved. All brand and product names are trademarks or registered trademarks of
their respective companies.
TRADEMARKS
Ethernet is a registered trademark of Xerox Corp.
FCC NOTICE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) This device must accept any interference received, including
the interference that may cause undesired operation.
CE NOTICE
Marking by the symbol indicates compliance of this equipment to the EMC directive of the European Community.
Such marking is indicative that this equipment meets or exceeds the following technical standards:
EMC Class A
EN 61000-6-4
EN 61000-3-2
EN 61000-3-3
EN 61000-6-2
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11

-4-
Table of Contents
0B1. Introduction.................................................................................................................................................6
1.1 Features..................................................................................................................................................7
1.2 Product Panels .......................................................................................................................................8
1.3 LED Indicators ........................................................................................................................................9
1.4 Specifications..........................................................................................................................................9
1B2. Installation.................................................................................................................................................12
10B2.1 Unpacking ......................................................................................................................................12
2.2 Safety Cautions ....................................................................................................................................12
12B2.3 DIN-Rail Mounting..........................................................................................................................13
13B2.4 Panel Mounting ..............................................................................................................................15
14B2.5 Applying Power ..............................................................................................................................17
2.6 Alarm Relay Output ..............................................................................................................................18
2.7 Reset Button.........................................................................................................................................19
2.8 Making UTP Connections.....................................................................................................................20
2.9 Making Fiber Connection......................................................................................................................21
2.10 Making PoE PSE Connections (PoE Model)......................................................................................23
1306B2.11 LED Indication..........................................................................................................................24
3. Manage the Device........................................................................................................................................26
3.1 IP Address & Password........................................................................................................................26
3.2 Configuring IP Address & Password via telnet.....................................................................................26
3.3 Configuring IP Address via Web Interface............................................................................................27
3.4 Reference Manuals for Web, Telnet Management...............................................................................29
3.5 Configuration for SNMP Management..................................................................................................30
3.6 SNMP MIBs ..........................................................................................................................................31
4. Function Modes.............................................................................................................................................33
4.1 Operating Mode Configuration .............................................................................................................33
4.2 2MC Mode ............................................................................................................................................36
4.3 F2F MC Mode.......................................................................................................................................37
4.4 2C1F Mode...........................................................................................................................................38
4.5 4P Switch Mode....................................................................................................................................39

-5-
5. Redundant Ring Application........................................................................................................................40
5.1 Auto Multi-Ring Technology for 4-Port Switch Mode............................................................................40
5.2 Redundant Ring Applications with industrial standard RSTP protocol.................................................41

-6-
0B1. Introduction
The SF70460MP is an industrial managed Gigabit Ethernet device which is featured with the following network
ports:
Two 10/100/1000Mbps Gigabit copper ports
Two dual-speed SFP slots for 100Base-FX 1000Base-X
The device features the following function modes:
Dual media converter mode
Dual media converters sharing redundant fiber uplink mode
Fiber to fiber media converter mode
4-port switch mode

-7-
1.1 Features
Provides (2) 10/100/1Gbps copper ports and (2) dual-speed SFP fiber port slots
Supports 802.3x flow control for full-duplex and backpressure for half-duplex
All copper ports support auto-negotiation and auto-MDI/MDI-X detection
Dual-speed SFP slots support 100BASE-FX and 1000BASE-X SFP
SFP featured with Digital Diagnostic Monitoring (DDM) support
Link fault pass through (LFPT) featured for all media converter modes
Redundant ring function featured for 4-port switch mode
Supports Gigabit full wire speed bridging & forwarding performance
Jumbo frame support up to 9600 bytes
Alarm relay output for events of power failure and configured port link down
Green Ethernet power saving
802.3az Energy Efficient Ethernet (EEE) support
Optional high power PoE PSE function on copper ports
Management:
- HTTP/HTTPS/SSHv2/CLI telnet/CLI console/SNMP v1/v2c/v3/RMON
- DHCP/DHCPv6 client, DHCP relay, DNS client, NTPv4
- IPv6 support, System Syslog, Configuration down/upload, Software upload
Security:
- NAS, 802.1X, MAC-based/Web/CLI authentication
- IP MAC binding, TACACS+, IP source guard
Layer 2:
- QoS, 802.1Q/MAC-based/Protocol-based/Private/IP subnet VLAN, Port Isolation
- Storm control for UC/MC/BC packets, Static MAC configuration
- IGMP v2/v3 snooping, MLD v1/v2 snooping, DHCP snooping
- Multiple Spanning Tree - MSTP. RSTP, STP
Auto Multi-Ring (KAMR) Technology:
- Fast failover response time, Auto recovery when failure is repaired
- Supports up to two redundant rings, Works with RSTP network

-8-
1.2 Product Panels
The following figure illustrates the front panel and rear panel of the device:
Front panel –PoE Model
Front panel –Standard Model

-9-
154BUp panel
1.3 LED Indicators
LED Function
POWER Power status
MNGT Management status
P1, P2 SPEED LEDs Speed status & PoE status
P1, P2 LINK LEDs Link & activity status
P3, P4 LEDs Speed & link & activity status of P3 & P4 SFP ports
1.4 Specifications
10/100/1000 Copper Ports (Port 1, Port 2)
Compliance IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3u 1000Base-T
Connectors Shielded RJ-45 jacks
Pin assignments Auto MDI/MDI-X detection
Configuration Auto-negotiation or software control
Transmission rate 10Mbps, 100Mbps, 1000Mbps
Duplex support Full/Half duplex
Network cable Cat.5 UTP
Dual-speed SFP Slots (Port 3, Port 4)
Compliance IEEE 802.3u 100Base-FX
IEEE 802.3z 1000Base-SX/LX (mini-GBIC)
Connectors SFP for optional SFP type fiber transceivers
Configuration Auto 1000Mbps, Full duplex
Forced 100Mbps, Full duplex
Transmission rate 100Mbps and 1000Mbps
Network cables MMF 50/125 60/125, SMF 9/125

-10-
Eye safety IEC 825 compliant
Power over Ethernet PSE Function (PoE Model)
PSE Ports Port 1, Port 2
Power output pins Positive of power voltage: pin 1,2
Negative of power voltage: pin 3,6
Standard IEEE 802.3at
Classification PD Class 0 ~ 4 detection
Power Delivery 35W max. (per port) at port output for Cat.5 distance up to 100 meters
Protection Under voltage protection
Over voltage protection
Over current detection
Switching Functions
MAC Addresses Table 8K entries
Forwarding & filtering Non-blocking, full wire speed
Switching technology Store and forward
Maximum packet length 9.6K bytes
IP Multicast groups 8192 supported
Flow control IEEE 802.3x pause frame base for full duplex operation
Back pressure for half duplex operation
Terminal Block Connector
DC power input Screwed euro terminal block: & contacts
Operating Input Voltages +8 ~ +60VDC (General applications)
+45 ~ +57VDC (PoE applications)
* Warning: The -48VDC power supply is not supported.
Power consumption 5W max. @12VDC (Full load with no PoE support)
75W max. (Full load with 2 PoE max. output)
Alarm relay output 3 terminal contacts (30VDC/1A max. or 120VAC/0.5A max.)
NC contacts: normal –shored, alarm –open
NO contacts: normal –open, alarm –shored
Alarm events Power failure, Specific port link fault (software configured)
Mechanical
Dimension (base) 140 x 106 x 42 mm (HxDxW)
Housing Enclosed metal with no fan