VESSILS MY-SDT16 User manual

KAMADO
GRILL CART
MY-SDT16 (grill not included)
Instruction Manual
@vessils_offical

IMPORTANT
Carefully remove any packaging materials before assembly
Read these instructions and take note of all of the safety
warnings carefully

PARTS LIST
#1 (x2) #2 (x2) #3 (x4) #4 (x1) #5 (x1)
#6 (x1) #7 (x1) #8 (x2) #9 (x2)
A (x2) B (x2) C (x14)
D (x10) F (x4) G (x4) H (x4)E (x4)
VESSILS | 1

ASSEMBLY
INSTRUCTIONS
Prior to assembly, check all parts against the parts list. Carry out
assembly on a soft surface to avoid scratching the paint. For ease
of assembly, only loosely tighten bolts to put the pieces together
and then tighten fully when assembly is complete.
WARNING
DO NOT over-tighten bolts. Only tighten all bolts with moderate
pressure to avoid damaging the bolts or components of the
Kamado Grill.
2 | VESSILS

STEPS
Connect parts #4 and #5
with C and D, get part I.
Connect parts #6 and #7
with C and D, get part II.
Connect parts #2 and #3 with C and D. Repeat for
another set, get a pair of part III.
VESSILS | 3

Connect parts #1 and #3
with C and D. Repeat for
another set, get a pair of
part IV.
STEPS
Take 1 piece of part III, connect it to part I with C&D and
connect it to part II with C&E. Repeat to attach the other part III.
Repeat the
above step 5
and attach the
pair of part IV.
Always use D for
part I and E for
part II
4 | VESSILS

Install the wheels (parts #8 and #9) with F, G and H
STEPS
Remove the rubber base pads under
the bracket. Attach the bracket to
the cart. Install the rubber pads back
and secure the connection with A
and B
VESSILS | 5

For more information, please visit www.vessils.com
If you need any assistance or support, please email
[email protected] with details. We will answer your email
within 24 hours.