VEVOR STL-1903 User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
PET DRYER
USER MANUAL
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

1
STL-1903/STL-1908/STL-1909
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
PET DRYER

2
IMPORTANT SAFEGUARDS
Before using, please read this manual and always
comply with basic precautions when using it. Once the
product is used, you acknowledge that you have
carefully read and accepted the following safety instructions.
Danger! Electric shock due to damage of appliance.
★Do not operate the appliance with a broken cord or plug or if the
appliance malfunctions,or is dropped or damaged in anyway.
★Always unplug the unit when not in use or left unattended. Do not wrap
the cord around the appliance.
★Never carry the unit by its power cord.
★Do not drop or insert any object into any opening.
★We do not recommend using the built-in heater during the summer
months.The heated airflow may damage your pets hair and skin.
★If however,the airflow is inadvertently obstructed during use,the builtin
thermal safety device will automatically cut out the appliance.This dryer will
switch on again automatically after cooling down for a few minutes.
★Please be sure to keep the air intake at the rear of the unit clear of debris
or blockage.Lack of proper airflow will damage the unit's motor and impact
product's life.
★If there happens to be a fault with the motor,the power light will illuminate
but no airflow will be produced. Immediately turnoff the heater as continued
use without airflow may result in a fire.
★When the pet dryer is used in a bathroom, unplug it after use since the
proximity of water presents a hazard even when the hairdryer is switched
off.
★For additional protection，the installation of a residual current
device(RCD) having a rated residual operating current not exceeding
30mAis advisable in the electrical circuit supplying the bathroom. Ask your
installer for advice. (NOTE: Mains sockets might not be permitted in
average sized bathrooms according to local wiring regulations.)
★If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.

3
★WARNING: Do not use this appliance near bathtubs, showers, basins or
other vessels containing water.
★INDOOR USE ONLY, This product is HOUSHOLD USE ONLY.
SAVE THESE INSTRUCTIONS
PARTS CHECKLIST
A- Dryer's body B- Flexible hose
C- Nozzles(4pcs) D- Handle
E- Buckle for connector F- Airflow controller
G- Power switch H- Heater switch
J- Filter storage K- Power Cord

4
TECHNICAL DATA
Model
STL-1903
STL-1909
STL-1908
Power
3.2HP
3.2HP
3.2HP
Voltage
AC120V
AC120V
AC220-240V
Frequency
60Hz
60Hz
50/60Hz
Airflow rate
70m/s
70m/s
70m/s
Noise range
70db-80db
70db-80db
70db-80db
Heating range
85-130°F
85-130°F
85-130°F
OPERATION GUIDE
A.Ensure that you are using anAC120V power source.
B.Before turning on the unit,make sure that nothing is blocking the air
intake at the rear of the unit.
C.Place the unit on a flat surface .
D.Install the hose according to the pictures provided below.
E.Press the power switch,which will illuminate.
F.Press the"Heat" switch and adjust accordingly. It is recommended to
avoid heater in the summer.
INSTALL THE HOSE
1
2

5
FREQUENT QUESTIONS
①Q：Why is my dryer's airflow getting weaker?
A：Please check your air intake and filter to see if the area is blocked.
②Q：T have a small dog and he is afraid of the dryer,what should I do?
A：We recommend adjusting the airflow to a lower setting until he
becomes is ed to it. Additionally,you can remove the nozzle and just
let the air blowout of the hose.
③Q：How do l clean the filter?
A：Simply unscrew the cover at dryer back and remove the filter.Then
flush out filter carefully. DO NOT install the filter until it is completely
dry.
④Q：Why is my dryer making a very high-pitched squeal?
A：When this happens, we recommend turning on the heater and letting
hot air flow from the unit for approximately 10 minutes.
CLEANING AND MAINTENANCE
1. Before cleaning the machine, please turn off the machine and unplug the power
outlet.
2. When cleaning the internal space of the machine, you can remove the bottom
3
4
5
6

6
air outlet plate, open the bottom drainage hole, use a small amount of water to
clean the bottom space of the machine, do not let the water flow into the back of
the electronic parts area, after cleaning is complete, use a dry towel to dry,
reinstallation can be used.
3. The back of hair strainer plates area, clean the collection of pet hair, you can
use a wet towel to scrub.
4. The top of the machine display and the back of a large number of lines and
electronic components, do not rinse with water to avoid damage.
CORRECT DISPOSAL
This product is subject to the provision of European Directive
2012/19/EC. The symbol showing a wheelie bin crossed through
indicates that the product requires separate refuse collection in the
European Union. This applies to the product and all accessories marked
with this symbol. Products marked as such may not be discarded with normal
domestic waste, but must be taken to a collection point for recycling electrical and
electronic devices
FCC INFORMATION:
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment!
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This product may cause harmful interference.
2)This product must accept any interference received, including interference that
may cause undesired operation.
WARNING: Changes or modifications to this product not expressly approved by
the party.responsible for compliance could void the user's authority to operate the
product.
Note: This product has been tested and found to comply with the limits for a Class
B digital device pursuant to Part 15 of the FCC Rules, These limits are designed to
provide reasonable protection against harmful interference in a residential

7
installation.
This product generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this product does cause
harmful interference to radio or television reception,which can be determined by
turning the product off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
· Reorient or relocate the receiving antenna.
· Increase the distance between the product and receiver.
· Connect the product to an outlet on a circuit different from that to which the
receiver is connected.
· Consult the dealer or an experienced radio/TV technician for assistance.
Sanven Technology Ltd.
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place,
Rancho Cucamonga, CA 91730
Made in China

Technical Support and E-Warranty Certificate
www.vevor.com/support
Made In China