VEVOR 0010 User manual

Support and E-Warranty Certificate
https://www.vevor.com/support
PORTABLE PAINT BOOTH
USER MANUAL
We continue to be committed to offering tools at competitive prices. "Save Half", "Half Price",
or any other similar expressions used by us only represent an estimate of savings you might
benefit from buying certain tools with us compared to the major top brands and do not
necessarily mean to cover all categories of tools offered by us. You are kindly reminded to
verify carefully when placing an order with us if you are saving half in comparison with the top
major brands.

1
MODEL:0010/0011
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
Portable Paint Booth

2
1.SAFE INSTRUCTIONS
Warning:
1. Spray paints and solvents can be dangerous if inhaled. Ensure you have good
ventilation at all times.
2. Keep away from heat, sparks, and open flames when painting. Don't smoke.
3. When painting, make sure to keep the ventilation.
4. Paint is harmful to the body. Avoid contact with eyes and skin. Please take good
protection.
5. When painting, avoid prolonged exposure to the sun.
6. When painting, lighting and electrical devices must be properly protected to avoid
accidents or personal injury.
7. For best results, avoid painting in hot, humid weather.
8. Recycle the used paint cans to avoid environmental damage.
CAUTION: Carefully read instructions and procedures for safe operations.

3
2.PRODUCT INTRODUCTION
3.PACKAGE CONTENT
0010
0011
Size
90*62*62 in
120*84*72 in
Material
Oxford-fabric 210D
Oxford-fabric 210D
Color
White
White
Ventilation window
60*40cm
60*40cm
Pole
φ8.5mm
φ8.5mm
0010
0011
Portable Paint Booth
×1
×1
Pole
×2
×2
Stake
×6
×6
Storage Bag
×1
×1
Plastic Wrap
×1
×1
User Manual
×1
×1
Model
SPEC.
Model
Parts

4
4.PRODUCT DIAGRAM
1）0010
No.
Item
Qty
1
Portable Paint Booth
1
2
Pole
2
3
Clip
16
4
Rope
2
5
Front Gauze Curtain
1
6
Foot Clasp
4
7
Ventilation Window
1

5
2）0011
No.
Item
Qty
1
Portable Paint Booth
1
2
Pole
2
3
Clip
16
4
Rope
2
5
Front Gauze Curtain
1
6
Foot Clasp
4
7
Ventilation Window
1

6
5.INSTALLATION INSTRUCTION
1. Unfold the tent and spread it
out on a clean and level surface
with the opening oriented
towards the front.
2. Lay out two of the
long poles and interlock
all segments.
3. Insert poles through the
tent sleeves, forming an
“X” shape on the sides of
the tent.
4.Insert the four ends of the two
poles into the bottom of the four
corners of the tent, as shown in
the picture.
Attach frame clips
located in the tent
section to the tent and
clip them into place.
Tie a bow on the side of
the tent where the two
poles form an “X”.
7. If you need to use the tent on grass, please fasten the tent
with stakes at the bottom loops and corners.

7
Storage
Take out the four corners of
the stakes.
2. Untie the knot in two
places.
Release clips (16pcs)
Take out all four corners of
the poles, as shown in the
picture.
Pull the two poles out of the
tent.
Put the combination rod
away as shown in the figure
and put it into the storage
bag.
Lay the tent flat and fold it as shown in the picture.
Roll the bagging poles and tent together and load into the large storage bag as shown in
the picture.

8
6.OPERATION GUIDE
Step 1. Assemble the portable paint booth.
Step 2. Roll up the front gauze curtain.
Step 3. Cover the bottom with the plastic wraph.
Step 4. The portable paint booth is ready for use.
Attention：This product is not waterproof. Please do not use it outdoor in rainy days.
For larger furniture, it is recommended to paint the front and top first and then dry the
bottom and back.
2) For Small furniture, it is recommended to configure a rotating tray, small furniture placed
on the rotating tray spray paint.
7. TROUBLESHOOTING, MAINTENANCE, AND REPAIR
1. To remove stains, clean with cold water and use mild remover if necessary. Do not use a
strong stain remover to avoid damage to the fabric or local fading.
2. Do not use a washing machine or dryer to clean the tent to avoid causing fabric damage.
3. After cleaning, please spread the tent indoors or outdoors in a cool place to dry; Do not
expose it to the sun to avoid damage to the fabric.
4. Check the tent regularly to see if there is any damage. If there is any damage, please
repair it in time. You can use a waterproof repair subsidy to repair the damaged parts.

9
5. After each use, check whether the nail is damaged or bent. If it is damaged, replace it in
time. If it is bent, straighten it with a hammer.
6. Check the pole after each use. If damaged, replace it in time.
7. Please store the tent in a dry and cool place, away from direct sunlight and damp places.
8. When the tent is stored, try to let it loose naturally, which can extend the service life of
the tent, and put some desiccant to moisture-proof.
Manufacturer: Zhejiang Roy Industrial Co., Ltd
Add: No.8, Juhai Second Road, Qujiang District, Quzhou City, Zhejiang Province

Support and E-Warranty Certificate
https://www.vevor.com/support