Victrola VA-20 User manual

WOODEN RECORD CRATE
Model: VA-20
Instruction Manual
Please read this instruction manual carefully before use
and keep it for future reference.

ASSEMBLING THE CRATE
STEP 1:
Put the right side of A1 into the left slot of B1.
STEP 2:
Put the left side of A1 into the right slot of B2.
Place all 5 boards on a clean flat surface and make sure all the labels (A1, A2, B1, B2, C) are facing up.
Keep in mind, while putting together the labels will all be on the inside of the crate.
Boards: 5 (PCS)
A1 A2
B1 B2
C
A1
B1
A1
B1B2
21
ASSEMBLY INSTRUCTIONS

STEP 3: Flip the unit 180, upside down.
Put A2 into the slots of B2 and B1. (A2 Label facing the inside of the crate)
Flip unit back 180.
WARNING: When holding the crate, make sure
to hold by the handles ONLY.
STEP 5:
SPECIFICATIONS
Weight: 5 lbs (2.3 kg)
Product Size: 14" (355 mm) W x 13.25" (336mm) D x 11.75" (298mm) H
Please note: As a result of continual improvements, the design and specifications of this product are
subject to change without notice. (Records and sleeves are not included.)
1. Make sure C is pushed all the way forward
into the slots of B2, A1, & B1.
2. Push A2 back into place.
STEP 4:
1. Push A2 to the top position,
2. then slide C into bottom slots (2).
Note: Make sure the C panel with
label is facing up.
3
ASSEMBLY INSTRUCTIONS
SPECIFICATIONS
A2
A2
2
1
5
WARNINGS:
• Read, heed and follow all instructions in the manual before operating.
• Keep this manual in a safe place for future reference.
• Choose unit location carefully. Avoid placing it in direct sunlight or close to a heat Also
avoid locations subject to vibrations and excessive dust, cost or moisture.
• Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
• This product should be moved with care to avoid damage or injury.
• Do not sit or stand on unit to avoid injury.
A1
B1B2
A1
B1B2
180
A2
2C
1
4
Slide A2 above
the top of
the side panels.
180
A2

VA20200323E
WARRANTY