IMAGE ADJUSTMENT
When the SETUP menu screen is displayed, select 'IMAGE
ADJ.' using the Up and Down buttons.
•FREEZE: View still pictures.
oOFF / ON selectable
•FLIP: OFF / HORIZ / VERT / BOTH selectable
•SHARPNESS: The outline of the video image becomes
cleaner and more distinctive as the level of
SHARPNESS increases. If the level goes up
excessively, however, it may affect the video image
and generate noise.
oThe available range of level is -8 ~ 8
•COLOR GAIN: To control the color level in the video.
oThe available range of level is -8 ~ 8
•GAMMA : Users can change the gamma setting
between 25 and100
SPECIAL
When the SETUP menu screen is displayed, select
'SPECIAL' by using the Up and Down buttons so that the
arrow indicates 'SPECIAL'.
•CAMERA ID: User can enter a unique name for the
respective camera. The maximum length of the ID is
ten characters.
oYou can choose the ON and OFF with the selector.
If you select ON, the entered camera ID is
displayed at the selected position in the video
picture (normal operation).
oPlease select the setup button while in ON mode.
oSelect the desired position with the selector.
1. Move the cursor to the letter required by using the
Set-Up button.
2. Select an ID from A, B~Y, Z, a, b~y, z, 0, 1~8, 9 by
using the LEFT and RIGHT buttons.
3. Repeat the above steps until the ID is complete.
1. Select the position where the ID is to be displayed by
using the LEFT and RIGHT buttons.
•VIDEO I/O: Move the cursor to select the video
system.
oVIDEO STANDARD: You can control NTSC / PAL,
Video level, Sync level, Burst level.
oVIDEO OUT: Interlace/ Progressive Video
selectable.
oDIGITAL OUT: Digital output ON/OFF selectable.
o656 OSD: Digital output OSD ON/OFF selectable.
oFIELD ORDER: Normal/Reverse Field selectable.
•DZOOM: Digital P/T/Z is used to create a zoom lens
effect.
Zoom Factor (1X to 4X), Pan (±100%, center of image
can be moved to left and right edges of screen), Tilt
(±100%, center of image can be moved to top and
bottom edges of screen)
● MOTION: This product has a feature that allows you to
observe movements of objects on the screen; hence a
single individual can conduct supervision efficiently. The
camera detects an object's movement by sensing
disparity of outline, and level of brightness and color.
oWhite: MOTION ZONE Position movement
Green: MOTION ZONE Size enlargement
Red: MOTION ZONE Size reduction
oFor MOTION ZONE Confirm, long press SET button
•PRIVACY SETUP: Hide an area you want to hide on
the screen.
oWhite: PRIVACY-ZONE Position movement.
oBlue: PRIVACY-ZONE Size enlargement or
reduction.
oFor PRIVACY-ZONE Confirm, long press SET button.
•SYNC: Two synchronization modes are available,
INTERNAL and EXTERNAL LINELOCK. In LINE-LOCK
mode, it synchronizes the video signal between
cameras without a synchronous generator. The line-
lock synchronization is only used in areas of 60Hz
(NTSC)/ 50Hz (PAL).
oINT: Internal synchronization
oLL: External line-lock synchronization
If 'LL' is selected, it can be adjusted to the desired
phase.
Press the SET button.
oAdjust to the desired phase from 0 to 360.
•RS485 SETUP: This function sets up the camera
communication status when controlling the camera
through an external control device.
RESET
Resets the camera settings to the factory defaults.
EXIT MENU
Saves all the setting menus and then exits.
SPECIFICATIONS
