Videor VDP-C37DP User manual

INSTRUCTION MANUAL
Video-Recording
VIII.SPECIFICATIONS
五、安全注意事项
Switch Power Supply(SMPS) 100V～240V(50Hz/60Hz)
Power Consumption Operation:6.5W±0.5W
Standby:1.5W±0.5W
Chime Tones Dingdong/ 8 Chord Melody Rings
Audio Communication System Duplex Hand-Free
Automatically Shutdown Time 60 Seconds
Unlock Signal Output 12V/2A～100ms
Cable between Monitor & Camera:
2
<50m: 0.5mm
2
>50m: 1.0mm
2
Door Lock Wiring: 18AWG, 1.0mm
Wiring
0 0
Working Temperature -10 C to +40 C
Video Format ASF
Memory Storage 2 GB Maximum
Designs Subject to Change Without Prior Notice.
Han d -Fr ee Co l or Vi deo D o or Ph one
enter
exit
left
right
MON ITOR
MEN U
Photo Format JPG

SAFETY INSTRUCTION
1)DO NOT EXPOSE THIS DEVICE TO RAIN OR OTHER LIQUID;
2)POWER ON AFTER WIRING OF THE COMPLETE SYSTEM;
3)DO NOT DISMANTLE THE COVERS OR TRY TO SERVICE THE UNIT
WITHOUT TECHNICAL PERSON;
4)KEEP THE USER MANUAL AND OTHER ACCESSORIES WELL;
5)FOLLOW THE INSTRUCTION OF OPERATION AND INSTALLING
AFTERWARDS;
6)SOLDERING WELL OF THE JUNCTION END OF WIRES
特殊功能:
. FUNCTIONAL COMPONENTS
Ⅰ
9
USB Port
8
Wiring Terminals
7”LCD Screen
1
4
Microphone
2
Power Lamp
3
Operation Lamp
11
Contrast Control
Brightness Control
10
12
Call Sound Volume Switch
13
Talk Volume Switch
5
Speaker
6 7
Monitor Menu
13
INDOOR MONITOR VDP-C37DVR
⑧
910 11 12 13
14
16
17
15
5.6-inch TFT-LCD
Microphone
Speaker
Monitor
Talking
Unlock
Warning
Returm
Up
Down
Menu
Confirm
Recording
Connecting Terminal strip
16
17 Ring Volume Adjustor
Brightness Adjustor
Contrast Adjustor
Introduction of System
Checklist of package
INDOOR MONITOR VDP-C33DVR
18
18 USB Port
Welcome to use our DVR Video door phone, it will bring more security to
your family.
The DVR product with latest CCTV technologies bears Recording function of
videos or/and photos. We provide bulky memory to save all the video/photos
and you can keep the videos/photos for long time, and download
videos/photos to computer as one universal connector USB port is provided
to help you do this.
We provide friendly user-guide menu to help you operate and set the door
phone, videos/photos can be replayed, deleted, favorite ring melody can be
changed and time and date can also can set.
Apart from the recording function, it also bears basic function of clear dual-
way communication, unlock, alert, surveillance and night vision.
Please read the user manual before installing and wiring. Do retain it for
future reference. Hope our product satisfies you mostly.
Please check your kit with this manual we have option of Video/Photo Memory
for this product.
Monitor; □ 1PC
Outdoor Station; □ 1PC
Cable; □ 1PC(4-wire, usually 15 meters)
Mounting bracket; □ 1PC
Mounting screws ; □ 1PC
AC/DC Power Adaptor(N/A in Built-in Power supply Models) □ 1PC
Photo-Memory Only □VDP-C37DP □VDP-C33DP
Video-Recording Only □VDP-C37DVR □VDP-C33DVR
Photo/Video Both □VDP-C37VP □VDP-C33VP

4
1
2
3
58 9
7
6
ODS-S □ ODS-5□
1
①
⑤ Wiring Terminal to Monitor “V”(Video)
⑦ Wiring Terminal to Monitor “A”(Audio)
⑨
⑩
2
3
4
Screw Holes
③
Lock Connector “UNL+”
Lock Connector “UNL-”
④ Speaker
② Camera
⑥ Wiring Terminal to Monitor “GND”(Power-)
⑧ Wiring Terminal to Monitor “+”(Power+)
Call
10
56789
10
4
1
2
3
58 9 10
7
6
ODS-J□
Microphone
Ring Setting
Monitor
V i d e o
Playback
Time Setting
Storage check
1-9 Melody Rings
Video Files Playing
Video Files Deleting
Year (1900~2100)
Play
Month (01~12)
Pause
Day (01~31)
Volume Reduce
Hour (00~23)
Volume Increase
Minute (00~59)
Second (00~59)
Main Panel
Ⅱ.Menu Checklist
Menu
Stand-by
Close Monitoring
Video Recording Start Recording
Stop Recording
Warning
Unlocking
Talking
Delete One(Selected)
Delete All
OUTDOOR STATIONS
Function Settting
Video/Photo
1. Warning, Unlocking & Talking
2. Monitoring
Press Call Button
III.Operation Instruction of VDP-C37DVR Series
Automatically Display
Close Monitoring(directly shut off the screen)
Stop Video Recording
Warning(Pressing this button 2 seconds, outdoor
camera will siren loudly)
Unlock(Electronically unlock the door and screen
will automatically close in 5s after unlocking.)
Talking(Talk with visitors)
Press Monitor Button under standby mode
if you want to monitor outside the door.
Time
Unread Videos
Close Monitoring(directly shut off the screen)
Video Recording(Record what you are seeing as video)
Warning (Pressing this button>2 seconds, outdoor
camera will siren loudly)
Unlock(Electronically unlock the door and screen
will automatically close in 5s after unlocking.)
Talking(Talk with visitors)
Total Files
00:00:16
SD :OK
Memo r y F ull
close
stop
alarm
unlock
talk
02/ 1 5 /20 1 0 1 4:5 3 : 02
Time
Video Icon
SD :OK
02 /1 2/ 201 0 13 :5 0: 02
01/0 0 7
close
record
alarm
unlock
talk
ODS-A□

-2-
3. Video Recording
4. Menu Operating
Press Record Button under monitoring or talking mode, video icon and
record time will be s h o wed on t h e s creen. It lasts 60 seconds if no action
operated on the door phone, you can also stop recording by pressing
“stop ”button
Close Monitoring(Directly shut off the screen)
Stop Recording Video
Warning
Unlocking
Talking
Once Memory is full, the system will automatically
delete the earliest records(20M) in order to make memory
for new recording.)
Switch to Icons at Right
Under standby mode,
press “Menu” Button
Access to Main Menu
Video Playback
Function Settting
Video Icon(Normally it is in Green and it is in Red when memory is <30M)
Time Setting
00:0 0 : 1 6
Memo r y F u ll
close
stop
alarm
unlock
talk
02/12/2010 13:50:02
Time
enter
exit
left
right
Storage Check
Access to Panel of Selected Setting
Exit Main Panel and Shut Off Screen
Switch to Icons at Left
4.1.Video Playback
After accessing to the menu, a group(4/group) of thumbnail images of video
files are showed on the screen.
After selecting the video you want to check, then press Play Button to play,
it will continuously play the video in time sequence until you stop it by Stop
Button or it will play all the videos. Press Exit Button to return to Thumbnail
images.
Select the Options: Delete One or Delete All.
Delete One or Delete All
a. Videos Playing
b.Videos Deleting
In the thumbnails list of videos, press Delete Button to delete the videos.
There are 2 options: Delete One and Delete All.
Play/Stop Video
Time Volume Strip
Play/Pause Icon
Reduce Volume
Return to previous menu; Return to Main
Panel when there is no video files.
Select the Former Video
Select the Next Video
Exit Video Playback and back to Main Panel
Access to Panel of Video Deleting
Select the Next Video
Select the Former Video
Play Video (press button again to pause
when playing.)
play
exit
back
next
delete
Video
01.0 3 .209 8
07:0 0 :06
REC 00001
Video Series No.1 Selected Video is Highlighted in Yellow
Recording Time of Selected Video
video
02/2 7 /2010 0 0 :00: 2 9
stop
exit
vol-
vol+
01.03 . 2 0 9 8
07:00 : 0 6
De l et e A ll
yes
exit
back
next
select
Vi de o
Recording Time of Slected Video
Confirm to Delete the Selected Video
Return to Previous Menu
Increase Volume
De l et e O ne

（B） 铃 声 选 择( Ring Setting )：
（B） 铃 声 选 择( Ring Setting )：
（A）视频回放(Video playback )：
(C)时 间 设 置( T i m e S e t t i n g ) :
(C)时 间 设 置( T i m e S e t t i n g ) :
（A） 视 频 回 放( Video playback )：
（A）视频回放(Video playback )：
4.3.Time Setting
4.4.Storage Check
Save the Ring You Select and Return
to Previous Menu
You can select ring chime tones and video/
photo option here
Current Ring
Return to Previous Menu (Main Panel)
Accessing to Time Setting then press Select Button to set
“year, month, date, hour, minute and second” accordingly.
Save Current Time Setting and Return
Previous Menu
Accessing to Storage Check to check percentage of usage and total memory.
Used Memory
Cancel the Current Ring Setting and
Return to Previous Menu
Move up to function-selecting
Move down to ring-selecting
Selected Part is highlighted
Select “Year, Month, Date, Hour,
Minute & Second” Part
To Less Digits
To Add Digits
Total Memory in SD Card
save
cancel
back
next
Cancel Time Setting and Return
Previous Menu
exit
SD :1 87 6M B
Us ed :7 3M
save
cancel
down
up
selcet
02 .2 7.2 01 0
15 :4 0:3 8
Function setting：video/photo
Ring setting：01
4.2. Function Setting
Function setting
USB Bridge Cable
5. Computer Download
Connect the USB port with PC's with USB bridge cable to download the videos.
1. When a visitor presses Call Button, a confirming tone is heard which verifies the
call is going.
2. Th e perso n inside presses “Talk” Button to answer the call and talk with
the visitor through microphones.
3. The unit is built in infrared & white LEDs, you can see the visitors clearly even
at deep night.
6. Outdoor Station
4. Fo r O D S - J b ea ri ng 3 ca m e r a s at t h e d o o r s t a t i o n g i v e s yo u 3 v i e w
direction(up, down right, down left) of visions which is much helpful for you to
identify visitors before opening your door.

1. Warning, Unlocking & Talking
Press Call Button
Automatically Display
00 :00 :1 6
01/ 1 6 /201 0 1 6 :11: 5 8 00:0 0 : 02
00 :00 :1 6
01/ 16/ 2 010 1 6 :1 1 :58 0 1 7/02 4
MONITOR
TALK
UNLOCK
AL ARM R ET UR N UP D OW N M EN U CO NF IR M R EC OR DI NG
AL ARM R ET UR N UP D OWN M EN U CO NF IR M R EC OR DI NG
MONITOR
TALK
UNLOCK
Close Monitoring(directly shut off the screen)
Warning(Touching this button>2 seconds, outdoor
camera will siren loudly)
Unlock(Electronically unlock the door and screen
will automatically close in 5s after unlocking.)
Talking(Talk with visitors)
Touch Monitor Button under standby mode
if you want to monitor outside the door.
Time
Unread Videos
Total Files
Talking
Unlock
Close Monitoring(directly shut off the screen)
Warning
Recording(Touch this button to stop or
start recording)
Recording(Touch this button to stop or start
recording)
Time
Video Icon
Tip:
Under basic function mode,
"Return, Up, Next, Menu and
Confirm" buttons don't work until
return to Menu-setting mode.
2. Monitoring
2106/02/07 06：28：15
AL AR M RE TU RN CO NT RO L NE XT M EN U CON FI RM R EC OR DI NG
Memory Full
00:00:1 6
02/ 1 2 /20 1 0 1 3:5 0 : 02
2106/02/07 06：28：15
ALARM RET URN CON TROL NE XT MENU C ONFIR M RECOR DING
监视
通话
开锁
告警 上移 下 移 菜单返回 确定 录像
00:0 0:16
02/ 12/20 10 13:5 0:02
AL AR M RE TUR N CO NT RO L NE XT ME NU C ON FI RM R ECO RD IN G
AL AR M RE T UR N UP D OW N ME NU C ON FI RM R EC OR DI N G
MONITOR
TALK
UNLOCK
AL AR M RE T UR N UP D OW N ME NU C ON FI RM R EC OR DI N G
MONITOR
TALK
UNLOCK
Memory is fnished(At this time, the system will automatically
delete the ealiest records(20M) in order to release memory
for new recording.)
Video Icon(Normally it is in Green and it is in Red when memory is <30M)
Time
Talking
Unlock
Close Monitoring(directly shut off the screen)
Warning
Recording(Touch this button to stop or
start recording)
Time Setting
Storage Check
Video Playback
Function Setting
Switch to Icons at Right
Access to Panel of Selected Setting
Exit Main Panel and Shut Off Screen
Switch to Icons at Left
Under standby mode,
Touch “Menu” Button
3. Video Recording
4. Menu Displaying
Touch “Recording” button to start recording (The recording button doesn’t
work under standby and Menu-setting modes.)
Attention:
Under Menu-setting mode,
“Recording, Monitor, Alarm,
Unlock” buttons don’t work until
return to Monitor or Talk mode.
Access to Main Menu:(following
buttons can be operated)
IV.Operation Instruction of VDP-C33DVR Series

AL AR M RE TUR N CO NT RO L NE XT ME NU C ON FI RM R ECO RD IN G
video
02/27 / 2 0 1 0 00:00:2 9
AL AR M RE TUR N CO NT RO L NE XT ME NU C ON FI RM R ECO RD IN G
Video
01.0 3 .209 8
07:0 0 :06
REC 00001
4.1 Video Playback
a.Videos Playing
Time VolumePlay/Pause Icon
Video Series No.1
Selected Video is Highlighted in Yellow
Recording Time of Selected Video
Select the Next Video
Select the Former Video
Play Video (Touch button again to
pause when playing.)
AL AR M RE T UR N UP D OW N ME NU C ON FI RM R EC OR DI NG
MONITOR
TALK
UNLOCK
AL AR M RE T UR N UP D OW N ME NU C ON FI RM R EC OR DI N G
MONITOR
TALK
UNLOCK
Play/Stop Video
Reduce Volume
Return to Previous Menu
Increase Volume
After accessing to the menu, a group(4/group) of thumbnail images of video
files are showed on the screen.
After selecting the video you want to check, then touch Play Button to play,
it will continuously play the video in time sequence until you stop it by Stop
Button or it finishes playing off all the following videos. After playing,
touch Exit Button to return to Thumbnail images.
Access to delete panel
9
AL AR M RE TU RN CO NT RO L NE XT M EN U CON FI RM R EC OR DI NG
01. 0 3.20 9 8
07: 0 0:06
Dlet e A l l
Vi d eo
Dlete one
（A） 视 频 回 放( Video playback )：
AL AR M RE TU RN CO NT RO L NE XT M EN U CON FI RM R EC OR DI NG
Select the Options: Delete One or Delete All.
Delete One or Delete All
b.Videos Deleting
In the thumbnails list of videos, touch Delete Button to delete the videos.
There are 2 options: Delete One and Delete All.
Return to previous menu; Return to Main
Panel when there is no video files.
Select the Former Video
Select the Next Video
Recording Time of Slected Video
Confirm to Delete the Selected Video
AL AR M RE T UR N UP D OW N ME NU C ON FI RM R EC OR DI NG
MONITOR
TALK
UNLOCK
AL AR M RE T UR N UP D OW N ME NU C ON FI RM R EC OR DI N G
MONITOR
TALK
UNLOCK
4.2 Function Setting
Save the Ring You Select and Return
to Previous Menu
Current Ring
Cancel the Current Ring Setting and
Return to Previous Menu
Return to Previous Menu
You can select ring chime tones and video/
photo option here
Move up to function-selecting
Move down to ring-selecting
Function sett in g：vide/photo
Ring setting：01
Function setting

save
cancel
down
up
select
（A） 视 频 回 放( Video playback )：
监视
菜单
02 2 7 201 0
15 :40 3 8
（A） 视 频 回 放( Video playback )：
AL AR M RE TU RN CO NT RO L NE XT M EN U CON FI RM R EC OR DI NG
监视
菜单
AL AR M RE TU RN CO NT RO L NE XT M EN U CON FI RM R EC OR DI NG
SD :1 87 6M B
Us ed :7 3M
AL AR M RE T UR N UP D OW N ME NU C ON FI RM R EC OR DI N G
MONITOR
TALK
UNLOCK
AL AR M RE T UR N UP D OW N ME NU C ON FI RM R EC OR DI NG
MONITOR
TALK
UNLOCK
4.4 Storage Check
Return to Previous Menu (Main Panel)
Accessing to Time Setting then touch Select Button to set
“year, month, date, hour, minute and second” accordingly.
Save Current Time Setting and Return
Previous Menu
Accessing to Storage Check to check percentage of usage and total memory.
Used Memory
Select “Year, Month, Date, Hour,
Minute & Second” Part
To Less Digits
To Add Digits
Total Memory of the SD Card
Cancel Time Setting and Return
Previous Menu
4.3 Time Setting
ALA RM RETU RN UP DOW N MENU CO NFIRM R ECORD ING
MONI TOR
TALK
UNLO CK
USB Bridge Cable
5. Computer Download
Connect the USB port with PC's with USB bridge cable to download the videos.
Selected Part is Highlighted
Outdoor Station
1. When a visitor presses Call Button, a confirming tone is heard which verifies
the call is going.
2.
3. The unit is built in infrared & white LEDs, you can see the visitors clearly
even at deep night.
The person inside presses Talk Button to answer the call and talk with the visitor
through microphones.
V. Wiring
V GND A
UNL+ UNL-
Indoor Monitor
Outdoor Camera
Door Lock
+
V
GND
A
+
1) Select a mounting location to an AC outlet but the monitor cannot be exposed to
4) Connect well the wires from Wiring Terminal and pull through the central hole
which connect to the Outdoor Station.
dirt, direct sunlight(or other strong light), direct moisture conditions. After
determining the location, attach mounting bracket securely to the wall.
3) Insert and fix the plug bolts in the small holes, then attach the mounting
bracket to the wall and fix with self-tapping screws.
2) Drill a hole in the center area of the bracket just big enough for the electrical wiring
to pull through, and drill small holes for plug bolts.
VI. Installing of Indoor Monitor
5) Attach the wired monitor unit to the bracket by setting the monitor over the four
bracket hooks and sliding it down.

Cable
① Plug Bolt ② Bracket ③ Self-Tapping Screws ④ Hook Holes
1.Bracket plate for indoor section
2.Plastic Expansion plug
3.Fixing screw
4.Holes for Hanging indoor section
1.5-1.7m
Notes: Do not expose the camera unit to direct
sunlight and be sure it is shield from storm rain. The
background of visitors may be affected by street lamp
and other strong light, you can mount some lamps to
highlight for clearer images of visitors.
The monitor is compatible with several camera units (ODS-J/ODS-S/ODS-5
ODS-A are optional.). Please verify the model no. before installation and follow
correct directions. The recommended location of camera unit is at the
height 150~170cm from central part of Camera to the floor (for reference only).
VII. Installing of Outdoor Station
① Dig a square hole which is the same size of the Flush Box in the wall and drill a
hole in the center for wiring and 2 small holes for plug bolts.
③ Pull the wiring which connect to Monitor Unit through the central hole and
connect well with Terminals “V, GND, A & +”. Also prepare 2 wires to connect
with Lock Connectors “UNL+ & UNL-” and pull through Flush Box and central
hole in the wall and connect with the door lock.
④ Put the wired Camera Unit in the Flush Box and fix with 2 Hex Socket Cap Screws.
② Fix the plug bolts in the 2 small holes and put the Flush Box into the wall and
fix with 2 self-tapping screws.
1) ODS-S
VDP-C33DVR Series
VDP-C37DVR Series
Hex Socket Screw Key
(Provided)
Put-in
Flush Box
Cable
① Dig a square hole which is the same size of the Flush Box in the wall and drill
a hole in the center for wiring and 4 small holes for plug bolts.
② Fix the plug bolts in the 4 small holes and put the Flush Box into the wall and
fix with 4 self-tapping screws.
③ Pull the wiring which connect to Monitor Unit through the central hole and connect
well with Terminals “V, GND, A & +”. Also prepare 2 wires to connect with Lock
Connectors “UNL+& UNL-” and pull through Flush Box and central hole in the
wall and connect with the door lock.
④ Put the wired Camera Unit in the Flush Box and fix with 4 drive screws.
2) ODS-5

Put-in
Drive Screws
Flush Box
Cable
(1)Frame part ：Surface-mount the frame part
Make holes for the screw by wall plastic expasion plug and fasten the screws
according to the hole of the frame part.
(2)The recommended height of 150CM helps the camera for proper monitoring
range. First , put the clasp in the frame with four screws, then secure the
frame into the wall.
(3)Connect the wires from the camera unit to the monitor wiring terminal.
(4)In the end install the outdoor section in the frame as depicted on the figure
below. Tighten up screw from the bottom.
plastic
expansion
plug
Screw
3) ODS-A
Put-in
Self-Tapping Screws
Drive Screw
Tab
Cable
Pop-out
Bracket
① Drill a hole in the center area of the bracket just big enough for the electrical
wiring to pull through. And drill 2 small holes for the plug bolts.
② Insert and fix the plug bolts in the 2 small holes, then attach the mounting
bracket to the wall and fix with 2 self-tapping screws.
③ Pull the wiring which connect to Monitor Unit through the central hole and connect
well with Terminals “V, GND, A & +”. Also prepare 2 wires to connect with Lock
Connectors “UNL+ & UNL-” and pull through Bracket and central hole in the wall
and connect with the door lock.
④ Put the wired Camera Unit in the bracket and pop out the tab at the bottom of
the unit. Fix it with drive screw and press back the tab.
4) ODS-J
Attention:
It is suggested that owners delete photos kept regularly for photo-memory
only model with SD built-in to hold thousands of photos for better
performance.
The handled objects are photos when the function setting is photo and it is
video when the function setting is video for photo/video both recording
model.
The system should be power off each time to refresh after downloading
files by the USB port for all the video door phone models with memory
function.