Vidikron VDP-80 Operation manual

VDP-80-720
DIGITAL VIDEO PROCESSOR
(optimized for 720p Vidikron high-definition display devices)
VERSION 1.0
OWNER’S OPERATING MANUAL

Vidikron VDP-80-720 Owner’s Operating Manual iii
PRELIMINARY
TWO YEAR LIMITED WARRANTY
For Projectors, Video Processors and Controllers
Congratulations on your purchase of a Vidikron video product and welcome to the Vidikron family! With proper installation, setup
and care, you should enjoy many years of unparalleled video performance.
This is a LIMITED WARRANTY as defined in the Magnuson-Moss Warranty Act. Please read it carefully and retain it with your other
important documents.
SERVICE LABOR: Vidikron will pay for service labor by Vidikron Authorized Service Center when needed as a result of manufacturing
defect for a period of two (2) years from the effective date of delivery to the end user (excluding the lamp).
PARTS: (Not including the lamp) Vidikron will provide new or rebuilt replacement parts for the parts that fail due to defects in
materials or workmanship for a period of two (2) years from the effective date of delivery to the end user. Such replacement parts
are then subsequently warranted for the remaining portion (if any) of the original warranty period.
This Limited Warranty only covers failure due to defects in materials and workmanship that occur during normal use and does not
cover normal maintenance. This Limited Warranty does not cover cabinets or any appearance items; failure resulting from
accident, misuse, abuse, neglect, mishandling, misapplication, faulty or improper installation or setup adjustments; improper
maintenance, alteration, improper use of any input signal; damage due to lightning or power line surges, spikes and brownouts;
damage that occurs during shipping or transit; or damage that is attributed to acts of God. In the case of remote control units,
damage resulting from leaking, old, damaged or improper batteries is also excluded from coverage under this Limited Warranty.
CAUTION: THIS LIMITED WARRANTY ONLY COVERS VIDIKRON PRODUCTS PURCHASED FROM VIDIKRON AUTHORIZED DEALERS.
ALL OTHER PRODUCTS ARE SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS LIMITED WARRANTY. MOREOVER, DAMAGE
RESULTING DIRECTLY OR INDIRECTLY FROM IMPROPER INSTALLATION OR SETUP IS SPECIFICALLY EXCLUDED FROM COVERAGE
UNDER THIS LIMITED WARRANTY.
Vidikron limits its obligations under any implied warranties under state laws to a period not to exceed the warranty period. There
are no express warranties. Vidikron also excludes any obligation on its part for incidental or consequential damages related to the
failure of this product to function properly. Some states do not allow limitations on how long an implied warranty lasts, and some
states do not allow the exclusion or limitation of incidental or consequential damages. So the above limitations or exclusions may
not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
This warranty begins on the effective date of delivery to the end user. For your convenience, keep the original bill of sale as
evidence of the purchase date.
Please fill out and mail your warranty registration card. It is imperative that Vidikron knows how to reach you promptly if we should
discover a safety problem or product update for which you must be notified.
WHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:
WHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:
RIGHTS, LIMITS AND EXCLUSIONS:
EFFECTIVE WARRANTY DATE:
IMPORTANT -- WARRANTY REGISTRATION:

iv Vidikron VDP-80-720 Owner’s Operating Manual
PRELIMINARY
Repairs made under the terms of this Limited Warranty covering your Vidikron video product will be performed at the location of
the product, during usual working hours, providing location of product is within normal operating distance from a Vidikron
Authorized Service Center. In some instances it may be necessary for the product to be returned to the Vidikron factory for repairs.
If, solely in Vidikron’s judgment, location of product to be repaired is beyond normal operating distance of the closest Vidikron
Authorized Service Center, or the repair requires the unit be returned to the Vidikron factory, it is the owner’s responsibility to
arrange for shipment of the product for repair. These arrangements must be made through the selling Vidikron Dealer. If this is not
possible, contact Vidikron directly for a Return Authorization number and shipping instructions. Vidikron will return product
transportation prepaid in the United States, unless no product defect is discovered. In that instance, shipping costs will be the
responsibility of the owner.
© Copyright 2006 Vidikron. This document contains proprietary information protected by copyright. All rights are reserved. No part
of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of
the manufacturer.
All trademarks and registered trademarks are the property of their respective owners.
CONTACT A VIDIKRON AUTHORIZED SERVICE CENTER TO OBTAIN SERVICE:
COPYRIGHT AND TRADEMARKS:

Vidikron VDP-80-720 Owner’s Operating Manual v
PRELIMINARY
To locate the name and address of the nearest Vidikron Authorized Service Center, or for additional information about this Limited
Warranty, please call or write:
VIDIKRON
Attn: Customer Service Department
2900 Faber Street
Union City, CA 94587
Ph: [phone]
Fax: [phone]
Toll Free: (888) 4VIDIKRON
VIDIKRON PRODUCT INFORMATION
RETAIN THIS INFORMATION FOR YOUR RECORDS
_________________________________________________________ ________________________________________
Model Purchased Date
____________________________________________________________________________________________________________
Serial Number
____________________________________________________________________________________________________________
Vidikron Authorized Dealer Name
____________________________________________________________________________________________________________
Address
____________________________________________ __________________ ________________________
City State/Province Postal Code
____________________________________________ _______________________________________________________
Phone Fax
ADDITIONAL INFORMATION:

vi Vidikron VDP-80-720 Owner’s Operating Manual
PRELIMINARY
Thank you for your purchase of this quality Vidikron product! It has been designed to provide you with the quality of video that is
expected in a home theater. For the best performance, please read this manual carefully as it is your guide through the menus and
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Do not use this equipment near water, outdoors or otherwise exposed to the elements.
5. Clean only with a dry cloth.
6. Do not block any ventilation openings.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
8. Do not defeat the safety feature of the polarized or grounding type plug. A polarized type plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The third prong is provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
9. The 12V trigger only outputs DC 12V signal for triggering. Do not connect to any other power input or output. This could cause
damage to this unit.
10. Only use accessories specified by Vidikron.
11. Keep the packing material in case the equipment should ever need to be shipped.
12. Unplug this processor during lightning storms or when it will not be used for an extended period of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the processor has been damaged in any way,
objects have fallen or spilled into the processor, the processor has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Safety Precautions
WARNING
This symbol is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a risk of electric shock.
This symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

Vidikron VDP-80-720 Owner’s Operating Manual vii
1Table of Contents
PRELIMINARY
TWO YEAR LIMITED WARRANTY ............................................................................................. iii
Safety Precautions ................................................................................................................... vi
1. Introduction ........................................................................................................................ 1
About This Manual ............................................................................................................................................ 1
Target Audience......................................................................................................................................... 1
If You Have Comments About This Manual... .................................................................................. 1
Textual and Graphic Conventions ....................................................................................................... 1
Using This Manual ............................................................................................................................................. 2
Description, Features and Benefits ............................................................................................................. 3
Product Overview ...................................................................................................................................... 3
Key Features and Benefits....................................................................................................................... 5
Parts List ........................................................................................................................................................ 6
2. Controls and Functions ...................................................................................................... 7
VDP-80-720 at a Glance ................................................................................................................................... 7
Controls, Indicators and Connectors .................................................................................................. 7
VDP-80-720 Remote Control ......................................................................................................................... 9
3. Installation ........................................................................................................................13
Remote Control ................................................................................................................................................13
Notes on Batteries ...................................................................................................................................13
Notes on Remote Control Operation................................................................................................13
Quick Setup .......................................................................................................................................................14
Installation Considerations ..........................................................................................................................15
Shelf Installation or Rack Mounting..................................................................................................16
Connections to the VDP-80-720 .................................................................................................................17
Connecting Display Devices to the VDP-80-720 ..........................................................................17
Connecting the VDP-80-720 to Source Components.................................................................18
RS-232 Controller Connection ............................................................................................................22

Table of Contents
viii Vidikron VDP-80-720 Owner’s Operating Manual
PRELIMINARY
4. Operation ..........................................................................................................................23
Turning on the Power ....................................................................................................................................23
Changing the Aspect Ratio ..........................................................................................................................23
Using the On-Screen Menus ........................................................................................................................25
Main Menu ................................................................................................................................................27
Source Type ...............................................................................................................................................27
Picture Adjust............................................................................................................................................27
Input Adjust ...............................................................................................................................................32
Input Name ................................................................................................................................................33
DVI Setup ....................................................................................................................................................33
Copy Settings ............................................................................................................................................34
Side Gray-Bar Level .................................................................................................................................34
Vertical Rate ...............................................................................................................................................34
LCD Setup ...................................................................................................................................................34
Input Display .............................................................................................................................................34
Lock...............................................................................................................................................................34
Power Management ...............................................................................................................................34
Save Settings .............................................................................................................................................35
Defaults .......................................................................................................................................................35
Using the Remote Numeric Commands .................................................................................................35
5. Maintenance and Troubleshooting ................................................................................ 39
Troubleshooting Tips .....................................................................................................................................39
6. Serial Communications .................................................................................................... 41
RS-232 Connection and Port Configuration ..........................................................................................41
Serial Command Syntax ................................................................................................................................41
7. Specifications ....................................................................................................................43
VDP-80-720 Specifications ...........................................................................................................................43

Vidikron VDP-80-720 Owner’s Operating Manual ix
PRELIMINARY
1List of Figures
1-1. VDP-80-720 Functional Block Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2-1. VDP-80-720 Controls, Indicators and Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2-2. VDP-80-720 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2-3. VDP-80-720 Remote Control Menu Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3-1. Display Device Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3-2. DVI or HDMI Source Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3-3. RGB Source Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3-4. SD/HD Component Video Source Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3-5. Composite and S-Video Source Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3-6. SDI Source Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
3-7. RS-232 Control System Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
4-1. VDP-80-720 OSD Menu Structure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
4-2. Typical PLUGE Pattern for Adjusting Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
4-3. Typical Gray Bar Pattern for Adjusting Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
4-4. Typical Color Bar Pattern for Adjusting Color Saturation and Tint . . . . . . . . . . . . . . . . . . . . . . . . 29
4-5. Typical Test Pattern for Adjusting Sharpness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

List of Figures
x Vidikron VDP-80-720 Owner’s Operating Manual
PRELIMINARY

Vidikron VDP-80-720 Owner’s Operating Manual 1
PRELIMINARY
1.1
About This Manual
This Owner’s Manual describes how to install, set up and operate your Vidikron VDP-80
Digital Video Processor, optimized for use with Vidikron's 720p (progressive) high-definition
displays. Throughout this manual, the Vidikron VDP-80 Digital Video Processor is referred to
simply as the “VDP-80-720.”
Target AudienceVidikron has prepared this manual to help home theater installers and end users get the
most out of the VDP-80-720.
Vidikron has made every effort to ensure that this manual is accurate as of the date it was
printed. However, because of ongoing product improvements and customer feedback, it
may require updating from time to time. You can always find the latest version of this and
other Vidikron product manuals on-line, at www.vidikron.com.
If You Have Comments About
This Manual...
Vidikron welcomes your comments about this manual. Send them to [email protected]om.
Textual and Graphic
Conventions
Text Conventions: The following conventions are used in this manual, in order to clarify the
information and instructions provided:
• Remote control button identifiers are set in upper-case bold type; for example, “Press EXIT
to return to the previous menu.”
• All keys with functional names are initial-capped, set in bold type and enclosed in angle
brackets. These keys are the following: <Enter>, <Spacebar>, <Control>, <Esc> and
<Tab>.
•<Enter> indicates that you may press either the RETURN or ENTER key on your computer
keyboard if it has both keys.
• Computer input (commands you type) and output (responses that appear on-screen) is
shown in monospace (fixed-width) type; for example: “To change the aspect ratio to
Anamorphic, type w.”
In addition to these conventions, underlining, boldface and/or italics are occasionally used to
highlight important information, as in this example:
1Introduction
Properly calibrate your display device input(s) BEFORE performing
any adjustments on the VDP-80-720. Consult the documentation for
your display device for detailed instructions.
Note

Introduction
2 Vidikron VDP-80-720 Owner’s Operating Manual
PRELIMINARY
Graphic Conventions: These symbols appear in numerous places throughout the manual,
to emphasize points that you must keep in mind to avoid problems with your equipment or
injury:
1.2
Using This Manual
Use the following table to locate the specific information you need in this manual.
TIPS highlight time-saving short cuts and helpful guidelines for using
certain features.
NOTES emphasize text with unusual importance or special significance.
They also provide supplemental information.
CAUTIONS alert users that a given action or omitted action can degrade
performance or cause a malfunction.
WARNINGS appear when a given action or omitted action can result in
damage to the equipment, or possible non-fatal injury to the user.
DANGER appears when a given action can cause severe injury or death.
Tip
Note
Caution
WARNING
DANGER!
If you need... ... Turn to page:
Information about obtaining service iv
General information about the VDP-80 Digital
Video Processor
3
Installation instructions 13
First-time configuration instructions 25
Advanced configuration instructions 35
Troubleshooting tips 39
Specifications for the VDP-80 Digital Video
Processor
43

Introduction
Vidikron VDP-80-720 Owner’s Operating Manual 3
PRELIMINARY
1.3
Description, Features and
Benefits
Thank you for purchasing the Vidikron VDP-80 Digital Video Processor. The Vidikron VDP-80
Digital Video Processor provides a cornerstone for the ultimate home theater experience. It
has been designed to offer superior video processing quality, while providing for multiple
component integration with your high definition Vidikron home theater display. We hope
you find that the VDP-80-720 exceeds your expectations.
Product OverviewThe primary functions of the VDP-80-720 are to act as a video switcher, process the selected
input, and output in the appropriate format and resolution. Standard definition (SD),
enhanced-definition (ED) and high-definition (HD) video inputs are all supported in addition
to a number of PC formats. Video inputs are converted to progressive video (as required) and
are scaled to the appropriate HD video output resolution.
Interlaced video has been in use for more than 50 years and is still the most common video
format. It displays half of the lines of picture information each sixtieth (or fiftieth) of a second.
Each half of the image is called a field and displays either all the even lines or all the odd lines.
So, an entire image, called a frame, takes a thirtieth (or twenty-fifth) of a second to display on
the screen. An “i” suffix on the resolution specification indicates an interlaced format.
In contrast, progressive video presents each frame as a whole. A “p” suffix on the resolution
specification indicates a progressive format. Converting interlaced video to progressive
video is referred to as “deinterlacing.”
The VDP-80-720 is comprised of four major functional sections:
• Input selection, conversion to digital (if needed), and video decoding
• Deinterlacing
• Filtering and scaling
• Conversion to analog video, or output as digital DVI-D video
These functional blocks are shown in Figure 1-1.
Figure 1-1. VDP-80-720 Functional Block Diagram
DVI-D1
DVI-D2
YPbPr/RGB3
YPbPr/RGB4
S-Video/Vid5
S-Video/Vid6
YPbPr/S-Vid/Vid7
YPbPr/S-Vid/Vid8
SDI 9
SDI 0
Input
Select,
A-to-D
and TV
Decoder
De-Interlacer Filtering
and Scaling
DVI-D
with
HDCP
Digital-to-
Analog
Conversion
DVI-D
RGBHV

Introduction
4 Vidikron VDP-80-720 Owner’s Operating Manual
PRELIMINARY
Composite and S-Video inputs automatically select between NTSC, PAL and SECAM formats.
Component/RGB and DVI-D inputs accept SD, ED and/or HD video at either 50 or 59.94 Hertz.
HDCP encryption is supported for DVI-D inputs. If encrypted, DVI-D inputs are decrypted,
processed, scaled and then re-encrypted for output as DVI-D (as opposed to being simply
“passed through”). The digitized data is then decoded into a digital video format for further
processing. For analog outputs, video is over-sampled to provide the best possible image
quality.
As part of the scaling process, digital filtering is used to enhance the image detail. This
enhancement allows standard definition inputs, such as DVDs, to appear to be much higher
resolution, even when viewed on the large screen sizes common in home theaters.
When the digital processing is completed, video is converted to analog using
digital-to-analog converters (DACs), or is output as DVI-D (digital) video. DVI-D video can use
either the “PC” range (full range black to white), or “video range” (reduced range for black to
white to allow for blacker-than-black and whiter-than-white levels).
An infrared (IR) remote control, or the serial RS232 port, is used for control and software
update. Critical display setup parameters have direct commands. Other functions use an
on-screen menu.
To allow options such as ISF day/night specific modes, the DVI-D and analog HD inputs
(Inputs 1 through 4) have four independent configuration memories. The other inputs have
two independent configuration memories.
HDCP encrypted DVI-D sources must be re-encrypted for output. As a
result, the analog RGB output is disabled when a DVI input is selected.
Also, the display must support HDCP to show these encrypted sources. If
the video input is interlaced, it is first deinterlaced into a progressive
format.
Note

Introduction
Vidikron VDP-80-720 Owner’s Operating Manual 5
PRELIMINARY
Key Features and BenefitsThe VDP-80-720 offers these key features and benefits:
• Ten inputs (2 Composite/SVideo, 2 Composite/SVideo/SD-Component, 2 SD/HD
Component/RGB, 2 DVI-D and 2 SDI)
• Video processing/deinterlacing is supported for HDCP encrypted DVI-D inputs
• Component/RGB analog and DVI-D input accept 720p and 1080i sources
• Transcoding (for example, component to RGB) for digital and analog inputs
• 3:2, 3:3 and 2:2 film pull-down frame-reconstruction for SD sources
• Per-pixel motion-adaptive video deinterlacing for SD sources
• Multiple, independent configuration memories for each input
• Black-level and contrast calibration per memory
• Color, red-color-offset, green-color-offset calibration per memory
• Hue, red-hue-offset, green-hue-offset calibration per memory
• Y/C delay calibration with independent CB and CR delay
• Detail enhancing scaler
• Programmable vertical refresh rate
• Programmable screen aspect ratio
• DVI-D output with HDCP encryption support
• BNC analog output
• Backlit infrared remote control with on-screen menu system
• RS232 serial interface for control and software updates
• Silent operation (no fan)

Introduction
6 Vidikron VDP-80-720 Owner’s Operating Manual
PRELIMINARY
Parts List Your VDP-80-720 is shipped with the following items. If any items are missing or damaged,
please contact your Vidikron dealer or Vidikron Customer Service at (888) 4VIDIKRON.
• VDP-80 Digital Video Processor
• External Power Supply
• Remote Control Unit and three (3), AA-size batteries
• Warranty information and registration card
• Vidikron VDP-80-720 Owner’s Operating Manual (this document)
•Rack-mountears
➤

Vidikron VDP-80-720 Owner’s Operating Manual 7
PRELIMINARY
2.1
VDP-80-720 at a Glance
Controls, Indicators and
Connectors
Figure 2-1 shows the locations of the VDP-80-720 controls, indicators and connectors.
Figure 2-1. VDP-80-720 Controls, Indicators and Connectors
1. LIQUID CRYSTAL DISPLAY (LCD)
A 16-character, back-lit display that shows the currently-selected menu item. The LCD
can either show command activity or be used as a “power-on” indicator. This behavior is
user-selectable.
When the LCD is set to “activity” it illuminates for a short time after commands are
received. When the LCD is set to “power” it stays illuminated as long as the VDP-80-720 is
on, turning off briefly when a command is received.
2. INFRARED SENSOR
Receives the signals from the remote control.
3. POWER/STANDBY INDICATOR
Lights red to indicate that the VDP-80-720 is in standby mode; lights green to indicate
normal operation.
2Controls and Functions
IN8 ISF NGHT
1 42 3
VDP-80-720
5 8 9 10 11 127 136
Rear Panel
Front Panel

Controls and Functions
8 Vidikron VDP-80-720 Owner’s Operating Manual
PRELIMINARY
4. POWER BUTTON
Press this button to toggle between normal, “power on” mode and standby mode. (The
VDP-80-720 takes about 8 to 10 seconds to enter standby mode.)
5. RS-232 CONTROL (9-pin, male D-Sub)
A male, 9-pin D-sub connector for interfacing with a PC or home theater
automation/control system.
6. POWER INPUT (+5 VDC)
Connect the VDP-80-720 to power here, using the included power adapter.
7. ANALOG OUTPUT (RGBHV, 5 x BNC)
Connect this to the RGB video input of your display device.
8. DIGITAL OUTPUT (DVI-D)
Connect this to the DVI or HDMI input of your display device.
9. DIGITAL INPUT 1
DIGITAL INPUT 2 (DVI-D)
HDCP-compliant digital video inputs for connecting a DVD player, personal computer or
HD tuner with a DVI or HDMI output.
10. SD/HD/RGB INPUT 3
SD/HD/RGB INPUT 4
Standard-definition (480i/576i) or high-definition (720p/1080i), YPrPb component
inputs for connecting a DVD player or high-definition TV source.
These inputs also accept the green, red and blue lines of an analog RGB signal.
11. SD INPUT 5
SD INPUT 6
Standard, Composite video or S-Video inputs for connecting a DVD player, satellite
receiver, camcorder, laser disc player or Super VHS (S-VHS) VCR.
12. SD INPUT 7
SD INPUT 8
Standard-definition Component, Composite or S-Video inputs for connecting a DVD
player, satellite receiver, camcorder, laser disc player or Super VHS (S-VHS) VCR.
13. SDI INPUT 9
SDI INPUT 10
Two Serial Digital Interface (SDI) inputs for connecting a DVD player or other SDI-capable
device.
For best results, do not run your DVD player in progressive mode.
When using Input 3 with an RGB source, connect the horizontal and
vertical sync lines to Input 5. Similarly connect the horizontal and vertical
sync lines to Input 6 when using Input 4 with an RGB source.
Tip
Note

Controls and Functions
Vidikron VDP-80-720 Owner’s Operating Manual 9
PRELIMINARY
2.2
VDP-80-720 Remote
Control
Figure 2-2 shows the VDP-80-720 remote control, and the paragraphs that follow describe its
functionality.
Figure 2-2. VDP-80-720 Remote Control
1. SENDING LED
Sends commands to the VDP-80-720 or other equipment, in the form of IR codes.
2. LEARNING EYE
Enables the remote control to receive and store IR codes from other remote controls.
3. LIGHT
Press to illuminate the buttons.
1/1 Device
VDP-80-720
3
6
4
5
7
7
8
1 2
Mode

Controls and Functions
10 Vidikron VDP-80-720 Owner’s Operating Manual
PRELIMINARY
4. LCD TOUCH SCREEN
See Figure 2-3 for screen descriptions. Touch the VDP-80-720 button to access the
menus.
Figure 2-3. VDP-80-720 Remote Control Menu Structure
5. + / -
Use these buttons to scroll through the five menu pages.
6. CONTENT-SPECIFIC BUTTONS
- Mode: Switches to special modes (press and hold for three seconds to activate the
special mode screen)
- Menu: Activates the menu screen
- Exit: Returns to the previous menu selection
- Device: Activates the device overview
7. CURSOR ( , , , ) (Aspect Ratio/Zoom)
Use these buttons to select items and settings, adjust settings or switch aspect ratios.
Press the right-arrow button ( ) to scroll through the available aspect ratios, in this
order: 16:9, I-Wide, 4:3, Letterbox. The left-arrow button ( ) functions similarly, but
presents these choices in reverse order.
Press the up-arrow button ( ) once or twice to zoom in on the image. Use the
down-arrow button ( ) to zoom back out.
Zoom is not available with the “I-Wide” aspect ratio.
Mon Apr 04 2:06 pm
1/5 VDP80-720
VDP80-720
Mode Menu Exit Device
ON OFF
Aspect Ratio
Source
Menu
Mon Apr 04 2:06 pm
2/5 VDP80-720
Mode Menu Exit Device
Menu
OK
Exit
Mon Apr 04 2:06 pm
3/5 VDP80-720
Mode Menu Exit Device
ISF Night
5
ISF Day
46
879
213
0
Mon Apr 04 2:06 pm
4/5 VDP80-720
Mode Menu Exit Device
4:3
LETTERBOX
I-Wide
16:9
Mon Apr 05 2:06 pm
5/5 VDP80-720
Mode Menu Exit Device
VIDIKRON
2900 Faber St.
Union City, Ca 94587
www.vidikron.com
Ph [phone]
Fax [phone]
Page 1
ON: Press to turn Controller on
OFF: Press to turn Controller off
Aspect Ratio: Press to select the Aspect Ratio screen
Source: Press to select the Source screen
Menu: Press to select the Menu screen
Page 2
▲▼◄►: Navigates you in the direction of the arrows
OK: Press to enable sub menu of highlighted selection
Menu: Press to select the Menu screen
Exit: Press to return to the previous menu selection
Page 3
0-9: Input selection (press 0 to select Input 10)
ISF Night: Press to recall settings stored in “ISF Night” image memory (MEM A);
press Menu + ISF Night to recall settings stored in “MEM C”
image memory (Inputs 1 through 4 only)
ISF Day: Press to recall settings stored in “ISF Day” image memory (MEM B);
press Menu + ISF Day to recall settings stored in “MEM D”
image memory (Inputs 1 through 4 only)
Page 4
4:3: Press to select 4:3 aspect ratio
LETTERBOX: Press to select LETTERBOX
aspect ratio
I-Wide: Press to select I-Wide aspect ratio
16:9: Press to select 16:9 aspect ratio
Page 5: Vidikron Information Screen
Content Specific Buttons
Mode: Hold this button down for 3 seconds to go into
“Special mode”screen
Menu: Press to select the Menu screen
Exit: Press to return to the previous menu selection
Device: Press to choose the device you wish to control
(VDP-80-720 or other device that you have
programmed this remote to control)
Note