Viessmann Vitocal 200-S User manual

VIESMANN VITOCAL 200-S
Air/water heat pump, split version
3.0 to 10.6 kW
VITOCAL 200-S Type AWB 201.B
Heat pump with electric drive in split design with external and
internal unit.
For central heating and DHW heating in heating systems.
VITOCAL 200-S Type AWB-AC 201.B
Equipment level as per type AWB 201.B, with additional active
cooling function plus integral instantaneous heating water
heater.
5822 525 GB 5/2011
Datasheet
For part no. and prices: see pricelist

■ Low operating costs through high COP (COP = Coefficient of Per-
formance) to EN 14511: Up to 4.6 (air 7 °C/water 35 °C) and up to
3.5 (air 2 °C/water 35 °C). Output control and DC inverter for high
efficiency in partial load operation.
■Maximum flow temperature: Up to 55 °C at -15 °C outside temper-
ature (with reduced output).
■ Weather-proof external unit with evaporator, compressor, expansion
valve and fan.
■ Internal unit with high efficiency heating circuit pump (to Energy
Label A), heat exchanger, 3-way diverter valve, safety assembly and
control unit; for the heating/cooling versions with an integral instan-
taneous heating water heater.
■ Easy to use Vitotronic control unit with plain text and graphic display
■ Highly convenient through reversible system that enables heating
and cooling.
EHPA quality seal as proof of the COP for subsidy according
to the German market incentive programme.
Benefits
2VIESMANN VITOCAL 200-S
5822 525 GB

Specification
Vitocal 200-S
Type AWB/AWB-AC 201.B04 201.B07 201.B10 201.B13
Output details, heating
to EN 14511 (A2/W35 °C, 5 K spread)
Rated heating output kW 3.00 5.60 7.70 10.60
Compressor frequency Hz 60 65 55 75
Fan speed rpm 870 650 650 650
Power consumption kW 0.91 1.73 2.20 3.25
Coefficient of performance ε (COP) in
heating mode
3.27 3.24 3.50 3.26
Output control kW 1.10 – 3.80 1.30 – 7.70 4.40 – 9.90 5.00 – 11.90
Heating output data
to EN 14511 (A7/W35 °C, 5 K spread)
Rated heating output kW 4.50 8.00 10.90 14.60
Compressor frequency Hz 60 65 55 75
Fan speed rpm 870 650 650 650
Power consumption kW 0.97 1.88 2.36 3.40
Coefficient of performance ε (COP) in
heating mode
4.64 4.26 4.62 4.29
Cooling capacity data
to EN 14511 (A35/W7 °C, 5 K spread)
Rated cooling capacity kW 3.20 6.20 7.40 9.10
Compressor frequency Hz 60 65 55 70
Fan speed rpm 870 650 650 650
Power consumption kW 1.08 2.40 2.69 3.64
Energy efficiency ratio EER 2.96 2.60 2.75 2.50
Output control kW 1.2 – 3.8 1.6 – 8.0 2.4 – 8.5 2.4 – 10.0
Cooling capacity data
to EN 14511 (A35/W18 °C, 5 K spread)
Rated cooling capacity kW 4.20 8.80 10.00 12.60
Compressor frequency Hz 60 65 55 70
Fan speed rpm 870 650 650 650
Power consumption kW 1.13 2.63 2.80 4.20
Energy efficiency ratio EER 3.72 3.35 3.57 3.00
Air intake temperature
Cooling mode (type AWB-AC)
– Min. °C15 15 15 15
– Max. °C45 45 45 45
Heating mode (type AWB, AWB-AC)
– Min. °C–15 –15 –15 –15
– Max. °C35 35 35 35
Heating water
at 10 K spread
Content l 2.2 2.2 3.2 3.2
Minimum flow rate (always maintain) l/h 600 820 1200 1380
Max. flow temperature °C55 55 55 55
Electrical values
External unit
– Rated voltage, compressor 1/N/PE 230 V/50 Hz
– Max. rated current, compressor A 5 9 10 15
– Starting current, compressor A 10.5 15 10 10
– Compressor starting current with stalled
armature
A 20 25 25 32
– Starting current (charging DC capaci-
tors)
A 45 < 35 30 30
– Internal fuse/MCB A 3.5 3.5 3.15 3.15
– IP rating IP 24 24 24 24
Specification
VITOCAL 200-S VIESMANN 3
5822 525 GB

Type AWB/AWB-AC 201.B04 201.B07 201.B10 201.B13
Electrical values
Internal unit
Heat pump control unit/PCB
– Rated voltage, control unit/PCB 1/N/PE 230 V/50 Hz
– Fuse protection, power supply 1xB16A
– Internal fuse/MCB 6.3A (slow)/250 V
Instantaneous heating water heater
Only for type AWB-AC
– Rated voltage 1/N/PE 230 V/50 Hz
3/N/PE 400 V/50 Hz
– Heating output kW 8.8 8.8 8.8 8.8
– Fuse protection, power supply 3xB16A 3xB16A 3xB16A 3xB16A
Electrical power consumption
– Fan (max.) W 65 70 130 130
– External unit (max.) W 3.0 3.6 5.8 5.8
– Secondary pump W 50 50 70 70
– Control unit/PCB, external unit (max.) W 150 150 150 150
– Control unit/PCB, internal unit (max.) W 5 5 5 5
– Max. power, control unit/PCB W 1000 1000 1000 1000
Refrigerant circuit
Refrigerant R410A R410A R410A R410A
Fill volume kg 1.2 2.15 2.95 2.95
Top-up amount for line lengths >12 m to
≤30 m
g/m 20 60 60 60
Compressor (hermetically sealed) Type Rotating piston Rotating piston Scroll Scroll
Permiss. operating pressure
– High pressure side bar
MPa
43
4.3
43
4.3
43
4.3
43
4.3
– Low pressure side bar
MPa
43
4.3
43
4.3
43
4.3
43
4.3
Dimensions
External unit
Total length mm 869 1040 900 900
Total width mm 290 340 340 340
Total height mm 610 865 1255 1255
Internal unit
Total length mm 450 450 450 450
Total width mm 360 360 360 360
Total height mm 905 905 905 905
Total weight
External unit kg 43 66 110 110
Internal unit type AWB kg 34 34 37 37
Internal unit type AWB-AC kg 38 38 41.5 41.5
Permiss. operating pressure, secondary
side
bar
MPa
3
0.3
3
0.3
3
0.3
3
0.3
Connections
Heating water flow G 1¼1¼1¼1¼
Heating water return and DHW cylinder
return
G1¼1¼1¼1¼
DHW cylinder flow G 1¼1¼1¼1¼
Condensate line (external unit) mm 16 x 1 16 x 1 16 x 1 16 x 1
Liquid line
– Pipe 7mm 6 x 1 10 x 1 10 x 1 10 x 1
– Internal unit UNF ⅝ ⅝ ⅝ ⅝
– External unit UNF ⁷⁄₁₆ ⅝ ⅝ ⅝
Hot gas line
– Pipe 7mm 12 x 1 16 x 1 16 x 1 16 x 1
– Internal unit UNF ⅞ ⅞ ⅞ ⅞
– External unit UNF ¾ ⅞ ⅞ ⅞
Refrigerant line lengths
– Min. m 3 3 3 3
– Max. m 20 30 30 30
Sound power of the external unit*1
Weighted total sound power level at
A7 °C (±3 K)/W35 °C (±5 K)
– At rated heating output dB(A) 60 62 62 63
*1 Measurements with reference to EN 12102/EN ISO 9614-2
Specification (cont.)
4VIESMANN VITOCAL 200-S
5822 525 GB

Internal unit dimensions
905
58
40
360
+
1105
150
AB
/
960
50
360
450
A B
75
147
219
294
369
41
ACable entry <42 V
BCable entry 400 V~/230 V~, >42 V
Specification (cont.)
VITOCAL 200-S VIESMANN 5
5822 525 GB

100
1000
100
A B
ACable entry <42 V
BCable entry 400 V~/230 V~, >42 V
Hydraulic connections
Symbol Meaning Connection
Refrigerant lines from/to the external unit: 7 connection pipe UNF thread
– Liquid line 10 mm ⅝
For type AWB-AC 201.B04, a reduction from 10 to 6 mm is required
downstream from the internal unit connection (reducer ⅝ to ⁷⁄₁₆
supplied).
– Hot gas line 16 mm ⅞
For type AWB-AC 201.B04, a reduction from 16 to 12 mm is
required downstream from the internal unit connection (reducer ⅞
to ¾ supplied).
DHW cylinder flow (heating water side) G 1¼
+
Heating water return and DHW cylinder return G 1¼
Heating water flow G 1¼
Specification (cont.)
6VIESMANN VITOCAL 200-S
5822 525 GB

External unit dimensions
Type AWB/AWB-AC 201.B04
74
308
290
610
500
40
795
869
Specification (cont.)
VITOCAL 200-S VIESMANN 7
5822 525 GB

Type AWB/AWB-AC 201.B07
340 950
1040
865
527
378
90
48
Specification (cont.)
8VIESMANN VITOCAL 200-S
5822 525 GB

Types AWB/AWB-AC 201.B10 and B13
340
1255
903
705 97357
357
50
Specification (cont.)
VITOCAL 200-S VIESMANN 9
5822 525 GB

10 VIESMANN VITOCAL 200-S
5822 525 GB
Printed on environmentally friendly, chlorine-free bleached paper
Subject to technical modifications.
Viessmann Limited
Hortonwood 30, Telford
Shropshire, TF1 7YP, GB
Telephone: [phone]
Fax: [phone]
E-mail: [email protected]
Viessmann Werke GmbH&Co KG
D-35107 Allendorf
Telephone: [phone]
Fax: [phone]
www.viessmann.com