Viettel HC3 User manual

Scan the QR code with the VHOME App
to add the device to your account.
Please keep it for further reference.

1
Package Contents
Wi-Fi Camera
Drill Template Screw Kit Waterproof Kit
Power Adapter Quick Start Guide
• The camera appearance is subject to the actual model you have
purchased.

2
Basics
Wi-Fi Camera
Micro SD Card Slot
(Behind the cover)
Reset Button
MIC
Ethernet Port
Power Port
Antenna
LED Indicator
Lens
Spotlight
IR Light
Name Description
LED Indicator • Solid Red: Camera starting up.
•
•
error).
• Solid Blue: Video being viewed in the VHOME app.
•
•

3
Get the VHOME App
1. Connect your mobile phone to Wi-Fi using your 2.4GHz network.
2. Search for “VHOME” in App Store or Google PlayTM.
3. Download and install the VHOME app.
4. Launch the app, and register an VHOME user account.
Setup
Follow the steps to set your camera:
1. Power on your camera.
2. Log in to your VHOME app user account.
3. Connect your camera to the Internet.
4. Add your camera to your VHOME account.
How to Set Your Wi-Fi Camera?
1 Power-on
Steps:
1. Connect the power adapter cable to the camera's power port.
2. Plug the power adapter into an electrical outlet.
Power Outlet
Power Adapter

4
2 Connect to the Internet
• Wireless Connection: Connect the camera to Wi-Fi. Refer to Option 1.
• Wired Connection: Connect the camera to a router. Refer to Option 2.
Option 1:
Steps:
1. Log in to your account using the VHOME app.
2. On the Home screen, tap “+” on the upper-right corner to go to the Scan
QR Code interface.
3. Scan the QR code on the Quick Start Guide cover or on the body of the
camera.
4.
Please choose to connect your camera to the Wi-Fi to which your mobile
phone has connected.
Hold the reset button for 5s to restart and set all parameters to default.
Hold the reset button for 5s in any of the following cases:
• The camera fails to connect to your Wi-Fi network.
• You want to change to another Wi-Fi network.

5
Option 2: Connect your Wi-Fi camera to a router.
Steps:
1. Connect the camera to the LAN port of your router with the Ethernet
cable.
Ethernet Cable
The LED turning slow-ashing blue indicates that the camera is
connected to the Internet.
2. Log in to your account using the VHOME app.
3. On the Home screen, tap “+” on the upper-right corner to go to the Scan
QR Code interface.
4. Scan the QR code on the Quick Start Guide cover or on the body of the
camera.
5. Follow the wizard to add the camera to the VHOME app.

6
Installation (Optional)
1 Install the Micro SD Card (Optional)
1. Remove the cover on the camera.
2. Insert the micro SD card (sold separately) into the card slot as shown in
3. Place the cover back on.
After installing the micro SD card, you should initialize the card in the
VHOME app before using it.
This Side Up
4. In the VHOME app, tap the Storage Status in the Device Settings interface
to check the SD card status.
5. If the memory card status displays as Uninitialized, tap to initialize it.
The status will then change to Normal and it can store videos.

7
2 Install the Camera
The camera can be mounted on the wall or ceiling. Here we take wall
mounting as an example.
• Recommended installation height: 3m (10ft).
• Make sure the wall/ceiling is strong enough to withstand three times
the weight of the camera.
• Avoid positioning the camera in an area that gets a lot of light shining
directly into the camera lens.
-Place the drill template onto the surface you have chosen to mount the
camera.
- (For cement wall/ceiling only) Drill screw holes according to the template,
and insert three anchors.
- Use three metal screws to x the camera according to the template.
Drill Template
Anchor Metal Screw
1
2 3
Please tear up the drill template after installing the base if needed.

8
3 Adjust the Surveillance Angle
- Loosen the adjusting knob.
-Adjust the surveillance angle for a best view of your camera.
-Tighten the adjusting knob.
Adjusting Knob
0-90°
0-360°
Make sure the micro SD card slot is facing downward.

9
Camera Wi-Fi
•

10
•
•
•
•
•
•

11
1
Các bước:

12
2
•
•
Các bước:
•
•

13
Các bước:

1
Storage Status (Trạng thái
lưu trữ)
Uninitialized (Chưa được khởi tạo)

2
•
•
•
-
-
-
1
2 3

16
3
-
-
-
0-90°
0-360°