Vine 14six8 User manual

Designers of acoustic and
environmentally sustainable
office solutions
VINE
ASSEMBLY INSTRUCTIONS

VINE
ASSEMBLY INSTRUCTIONS
Diagonal support strut
Standard 8 slot connector
Edge connector 180 degree
Edge connector 90 degreeMain frame strut
COMPONENTS

VINE
ASSEMBLY INSTRUCTIONS
STEP 1 STEP 2
•Begin assembly from any corner of the installation using the
edge connectors along the outer perimeter and standard 8 slot
connectors for all inner junctions to join four main frame struts.
•Create one full, 4 sided main frame structure.
•Create a second main frame structure by joining an
additional 3 main frame struts.

VINE
ASSEMBLY INSTRUCTIONS
STEP 3 STEP 4
•Connect 4 diagonal supports together using a standard 8 slot
round connector at their junction point and then slot in each
individual diagonal arm into the corresponding slots of the
main frame connectors.
•Assemble an additional 2 main frame structures with their
diagonal supports and connect together to form a 4
module system.

VINE
ASSEMBLY INSTRUCTIONS
STEP 5 STEP 6
Flip over
•Insert 4 main frame struts to reinforce the diagonal supports.

VINE
ASSEMBLY INSTRUCTIONS
STEP 7 STEP 8
•The system can now be expanded by building up the main
frame with its diagonals as seen in step 7, 8 and 9.
•Do not forget to add in the main frame struts to reinforce the
diagonals as seen in step 5 as you go along.

VINE
ASSEMBLY INSTRUCTIONS
STEP 9

VINE
ASSEMBLY INSTRUCTIONS
Suspension points

VINE
ASSEMBLY INSTRUCTIONS
Option 2: Spike Bracket direct install to the ceiling.
Suggested Fixings
Option 1: Spike Bracket with Griplock and Aircraft Cable.
Sheet Thickness
12mm
Dimensions
1000mm (w) X 1000mm (l) modules 600 (h)
Aircraft Cable
Griplock
2. Press down to
insert cable
1. Unscrew safety
cap
3. Screw down
safety cap
Spike Bracket

Telephone
Francois: [phone]
Daniel: [phone]
Email
[email protected]
Website
www.14six8.com
Address
71-75, Shelton Street, Covent Garden,
London, WC2H 9JQ, United Kingdom
VINE
ASSEMBLY INSTRUCTIONS