VIORE LC42V48 User manual
OPERATIONSAFETY ................................................................................... .1
TO CUSTOMERS .......................................................................................... 1
SAFETY & PRECAUTIONS ............................................................................ 1
IMPORTANT SAFETY iNSTRUCTiONS .......................................................... 3
TRADEMARK iNFORMATiON ....................................................................... 3
POWER ON/OFF ........................................................................................... 4
PRODUCT iNSTALLATiON ........................................................................... 4
SOURCE iNPUT CONNECTORS ................................................................... 5
REMOTE CONTROL .................................................................................... 7
BASIC OPERATION ..................................................................................... 8
On Screen Display (OSD) Operations
PICTURE SETTINGS ................................................................... 9
AUDIO SETTINGS ....................................................................... 1 0
TiME SETTINGS .......................................................................... 1 0
OPTION SETTINGS ..................................................................... 11
LOCK SETTINGS ........................................................................ 1 3
CHANNEL SETTINGS ................................................................. 1 5
Q&A .......................................................................................................... 1 6
VGASUPPORTED TIMING MODES ............................................................. 1 7
RISKOFELECTRICSHOCI4
DONOTOPEN
CAUTION: TO REDUCE THE RiSK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION: To avoid fire and electric shocks, do not expose this product under
damp or humid condition and make sure the plug is fully plugged in at all time.
WARNING: Never open the housing of the LCD display. When the housing is
opened, there is a danger of injury from electric shock. There is no component
that can be replaced by users. Please contact the service personnel and replace
with manufacturer-appointed components.
DISPOSAL: Due to the environmental concerns, please refer to your local
authorized organization or electronics industry society before you dispose this product.
Please visit http://www.eia.org for more information.
Thank you for purchasing this product. Please read through the instructions and
follow the steps in order to achieve the maximum reliability. Please keep this
manual handy and close to your LCD display after reading.
©Manual Guide--Please read through the operation manual before operating this product.
©Instructions--Please follow and be aware of cautions and warnings.
©Follow Steps--Please follow the operation procedures.
©Socket Outlet--Please use standard socket outlet to avoid damage to the LCD display.
©Power Source--This product has to be operated with correct power source
shown on the label.
©Power Cord Protection--Avoid tangling or placing objects on the power cord.
©Over-loading--Avoid AC power over-loading, which may lead to fire or electric shock.
©DonotinsertanyobjectsthroughtheslotsandopeningsoftheLCD
display.Thismayleadtoanelectricalshort-circuitorevencausefireand
resultindamagetoyourLCDdisplay.
©Repair--Pleaseunplugthepowercordandcontactdistributorsorqualified
repairpersonnelifanyofthefollowingsituationshappens.
1.Powercordisdamaged.
2.Objectshavebeeninsertedthroughtheslotsandopeningsofthedisplay.
3.Productisunderhumidconditionorliquidleaksontothedisplay.
4.Productcannotfunctionnormallyorcannotoperate.
5.Producthasbeendroppedordamaged.
sNOte:WhenusingAVsignals(e.gDVD,VCR..),Pleasechecktheinput source if
the screen appears glittering or is having bad signals, make sure cables are
correctly connected and DVD player output setting is the same as TV resolution
erring. (Resolution is under 480i or 576i etc.)
©Parts Replacement-- If any parts need to be replaced, please contact the
service personnel.
©Wall Mounting-- Please use correct wall mount and follow instructions when
installing the display onto the wall.
©Cleaning--Unplug power cord beforehand. Please use dry and soft sponge to
clean the screen surface. Do not use diluted acid.
©Humidity--Keep this product away from moisture or high humidity area.
©Placement--Place this product on a stable and vibration free surface in order to
avoid the LCD display from falling.
©Ventilation--Please never cover or block openings and slots of the display.
This may cause display to over-heat and reduce its life time. Please allow some
space for ventilation.
©Away from heat sources--Keep this product away from heat sources such as
direct exposure to sunlight, heater and stove, etc. This may avoid structure
distortion and machine break down.
©Storage--Unplug power cord from the socket outlet if the LCD display is not
intended to be used for a long period of time. When switched off, the LCD display
can be stored comfortably between 41"F to 95°F (5°Cto 35 °C )
1.Readtheseinstructions.
2.Keeptheseinstructions.
3.Heedallwarnings.
4.Followallinstructions.
5.Donotusethisproductnearwater.
6.Cleanonlywithdrycloth.
7.Donotblockanyventilationopenings.Installinaccordancewiththemanufacturer'sinstructions.
8.Donotinstallnearanyheatsourcessuchasradiators.Heatregisters,stoves,orother
items/products(includingamplifiers)thatproduceheat.
9.Donotdefeatthesafetypurposeofthepolarizedorgrounding-type.Apolarizedplughastwo
bladeswithonewiderthantheother.Agroundingtypeplughastwobladesandathirdgrounding
prong.Thewidebladeorthethirdprongareprovidedforyousafety.Iftheprovidedplugdoes
notfitintoyouroutlet,consultanelectricianforreplacementoftheobsoleteoutlet.
10.Protectthepowercordfrombeingwalkedonorpinchedparticularlyatplugs,convenience
receptacles,andthepointwheretheyexitfromtheproduct.
11.Onlyuseattachments/accessoriesspecifiedbythemanufacturer.
12.Useonlywiththecart,stand,tripod,bracket,ortablespecifiedbythemanufacturer,orsold
withtheproduct.Whenacartisused,usecautionwhenmovingthecart/productcombination
toavoidinjuryfromtip-over.
13.Unplugthisproductduringlightningstormsorwhenunusedforlongperiodsoftime.
14.Servicingisrequiredwhentheproducthasbeendamagedinanyway.Referallservicingto
qualifiedservicepersonnelifanyofthefollowingoccur:powersupplycordorplugisdamaged;
liquidhasbeenspilledintotv;objectshavefallenintotheunit;tvhasbeenexposedto
rain/moisture;unithasbeendropped;unitnotfunctioningnormally.
15.z_Attention,consultaccompanyingdocumentswithrespecttoelectricShock,
Thesymbolinfigureshallbeshownadjacenttothetextoftime12above.
i- ]IDOLByIoManufactured under license fr°m D°lby Lab°rat°ries
"Dolby" and the double-D symbol are trademarks of
I_ | 6 | T A L DolbyLaboratories.
1.PressPOWERbuttonfromkeypad(orremotecontrol)toturnonthe
TV.Thelightindicatorwillturngreenafterfewsecondsandtheimage
shouldshowonthescreen.
2.PressPOWERbuttonagaintoswitchofftheTV.Lightindicatorwill
turnbacktored.
Warning:ElectricalcurrentsmaystillremaininTVafterpowerisswitched
off.Pleaseunplugthepowercordifitisnotintendedtobeused
foralongperiodoftime.
O YoucanusethisdisplaytoplaywithaVideoGameConsole,VideoCamera,
DVDPlayerand/orTV.
Pleaseconnecttocomponentiftheexternaldeviceshavecomponentoutputs.
Pleaseconnecttocorrectvideoandaudiojackswithexternaldevices.
Pleasepurchasestandardsignalcables.
PleaseswitchofftheTVbeforeattachingadditionalequipmenttoit.
1.AntennaInstallation
O Pleaseusecoaxialcabletoconnectwithantennaconnector.
Pleaseconnectantennacabletomulti-mediabox'stunerhead<ANT>.
Pleasedonotinstallantennaunderrainingorthunderingcondition.
I Caution: Please use legal cable TV, otherwise it may ]
damage the product. It may also void warranty. J
2.VGASource Connection:
Please switch off PC and TV. Connect VGA cable to display's D-Sub connector, and
connect the other end of cable to VGA Output
3.HDMI Source Connection:
Use HDMI cable to connect with TV andAudio-video equipment.
4.S-VlDEO/AV Source Connection:
Use S-VlDEO/AVterminals when connecting to a DVD player and other audiovisual
equipment.
5.Speaker Jack(Audio Out):
This TV provides audio output jack (Audio OUT) which allows
connection to external speakers or stereo.
6.Power Connection:
Please use correct socket outlet.
Please unplug the power cord if the TV is not intended to be used for a long period
of time. 4
Multi-media box
Fig. 1
Connectors Description
Ct"ANT. Connects to TV RF signals (Antenna/Cable).
Send the TV's Audio to external audio equipment
@AUDIO OUTPUT (stereo system).
_3_PC AUDIO INPUT PC audio input.
@VGA/PC INPUT Connects to VGA analog signals sources.
....YPbPr and R/L
"DJAUDIO INPUT
When connecting to component video port, you can
use the YPbPr video signal. For example, DVD
(progressive support) players and hi-scale HDTV
decoders or satellite receivers obtain video with
maximum resolution using the YPbPr and R/L audio
signal using component video/audio cables.
Connectors Description
_6"_Video /S-Video, Connects to S-Video (Y/C) or composite video and
• R/LAUDIO INPUT audio signal (R/L) Line.
_ HDMI High Definition Multimedia Interface Connects to
devices with digitals signals and can be used with PC
or HDTV video signals. HDTV support timing:
1080i,720P,576i,576P,480i and 480P.
1.Power:PowerON/OFF.
.Source:Switchesbetweensignalsources.
3.Aspect:Switchto4:3or16:9displayformat.
4.Mute:SwitchsoundON/OFF.
5.NumericButtons:Switchtofavoritechannel
directlybyenteringthechannelnumbers.
6.Menu:Displaythemenuscreen.
7.Return:Usedtoswitchbacktotheprevious
channel.
8.CH+- :UseCH+tochangechannelupand
CH-tochangechanneldown.
9.VOL+- :UseVol+tochangevolumeupand
useVol-to change volume down.
10. Display: To display channel/source
information.
11. Exit: Back to previous program.
12. Sleep: Press repeatedly to setup the sleep
timer.
13. MTS: Switch to Mono/SAP/Stereo.
14. Direct Source Keys: Access to S-Video/VGA
/AV/Component/DVl/HDMI/TV source
directly.
I_ The function and picture of the remote may
vary depending on the model. If a function key]
is unsupported by the model, a red icon ® will|
display on the OSD. ./)
• Remote reception distance will be
shorter as the signal receiver is
facing a strong light.
OAll impacts should be avoided.
Q Remote control should point directly to
the TV signal receiver.
®
®
Humidity and high temperature
conditions should be avoided.
Batteries are suggested to be
removed if the remote control
will not be in use for a period
Note:The remote control may vary, but the control function are similar
O
[KEY PAD BUTTONS OPERATION]
CN
V A
1
®
VOL
@
SOURCE
t?
@
MENU POWER
??
® ®
CHANNEL SELECTION BUTTONS
1.Channel Selection
Press CH '_.E_buttons to switch channels
®SOURCE SELECTION BUTTON
1.Press SOURCE (_ button to change inputsource.
2.After source input has been selected, press SOURCE _C_ button to confirm.
•MENU BUTTONS
1.Press MENU_B) button to display OSD menu.
2.Use _/_ or '_D_ buttons to select options.
3.Use SOURCE _ button to confirm selected adjustment option.
4.Use '_D_and '_' buttons to proceed adjustment.
® VOLUME CONTROL BUTTONS
1.Press VOL += _D_'button, to turn the volume up or down.
2. Use _[)_,/O/_E_ buttons to proceed adjustment.
1.Press the MENU button on the remote control to display the main menu.
2.Press the4_buttons to highlight the menu entries.
3.Press the y/_,,I button to enter the submenu.
4.Press theY, l, buttons to highlight the item to be adjusted.
5.Press 411_to adjust the setting.
6.Press the Exit Button or the MENU button twice to exit OSD menu.
[NOTE: Items in gray cannot be selected and/or adjusted.]
PI6TURE A IJ: O T _qE: OPTON _OCK Cf_*Af_l_ EJ_
Switch picture mode from Standard / Dynamic / Soft
Picture Mode / Personal.
Contrast Adjust to increase or decrease the contrast,
Brightness Adjust to brighten or darken the picture,
Sharpness Adjust to sharpen or soften the picture,
Tint To adjust the picture tone,
_Tocharacterize the spectral properties of a light
source, Low color temperature implies warmer
Color (more yellow/red)light, while high color temperature
mp esacoder(morebue) ght.
P CTL klE AUDIO T_E OP T 0'_ _©CK CklAI_I_EJ_
Sound Mode
Bass
Treble
Balance
Audio Language
Audio Channel
Switch sound mode from Standard /Music /Movie
/Personal.
To adjust the bass level.
To adjust the treble level.
To balance speaker channel.
To change the language.
To change the audio channel in L+R/L+L/R+R.
PC ERE AL IJ: © TIME OPT©N _©CK C klAf_l_ F:I
i i i ii iiiilii
Sleep Timer Set the timer to turn off TV.
Set the time zone to Pacific, Alaska, Hawaii, Eastern
Time Zone Central,Mountain.
Daylight Saving Time Set the daylight saving time to turn on or turn off.
Clock Current Time display.
10
POT RE A I:0 T _H! OPTION _OCK CHANNEl
Menu Language To choose OSD language to English/Spanish/French,
Transparency Set the transparency on or off to OSD menu,
Color Mode Set the color mode to Normal/Warm/Cool,
Zoom Mode Select the video display to Normal/Wide/Zoom/Cinema/4:3,
Advance Only functional in PC mode,
Closed Caption Set the closed caption option,
Restore Default Restore General&Channelsettin 9 to default,
Auto PowerOn Switch "Auto Power On" function on/off,
SW Version Select to display the firmware version,
PCRRE A I:O T _¢H
P _T I¢__ A IJ: O T _¢H
_CT[ RIJ_: A[ IJ::_O T _qH! OPTON LOCK C HiAf_l_ El
==================================
Enter Password Set the parental control setting,
[Default Password : 0 0 0 0 ]
_ C T[ i,_E A[ IJ: O T _qH! OPTON LOCK C_'lAf_l_ F_:I
Change Password To change the password for the parental control setting,
System Lock To set System Lock On/Off,
Unrated Lock To set Unrated Lock On/Off,
US To set ratings for USA,
Canada To set ratings for Canada,
13
}_ CX_[ i_E AlE O T_qE OPTON LOCK CHANNEl
}_CT RE A E O T_qE OPTON LOCK CHANN E:I
i iliii!iii i _!ii_!iiii _! ! i _iiHi!i! i }liii!!
Canada Eng Select the block programs by the Canada-English rating.
Canada Fre Select the block programs by the Canada-French rating.
14
IS CT klE A D© Y_E OP T ©'_ _©CK CHANNEL
Antenna To select from AIR/CATV mode.
Auto Scan Select to scan all available channels.
Favorite Set the favorite channel.
Show/Hide Set the channel to show or hide.
Channel No. To rotate through channels.
Channel Label To edit the channel name.
DTV Signal To display DTV signal level.
15
When the LCD display does not function as normal, please read the
following before you contact local service center.
Problem Possible Reason Solution
1.Check the battery 1.Replace battery
Remote Control 2. Remote distance is too far 2.Adjust for an appropriate
Failure away from the display, distance
No Picture
Picture without
sound
1.Power cord is not connected
properly
2.Is the switch on?
3.Source cables are not
connected properly
1.Check power cord
connection
2.Switch on the power
3.Check signal cables
connection
I.Problem with signal source
2.Volume has been muted or
minimized?
3.Source cables are not connected
properly
1.Check signal cable
connection.
2.Adjust volume.
3. Check audio input
connection.
1.Source cables are not 1.Check signal cable
connected properly connection.
Picture Failure
Sound without
picture
Note: Ifthe screen is glittering
or having bad signals, please
check the input source
solution(e.g. 480i, 576i etc).
1.Problem with signal source? 1.Check signal source
1.Color is not right 1.Adjust color accordingly
Color is not right 2.Phase is not right 2.Adjust phase accordingly
Picture is too din" Brightness, contrast is not right? Adjust birghtness and
contrast accordingly
16
_Resolution Table
This table provides the best resolution for the monitor=
Horizontal Frequency Vertical Frequency
Mode Resolution (KHz) (Hz)
640x350@70Hz 31.469(+) 70. 087(-)
VGA 640x480@60Hz 31.469(-) 59.940(-)
640x480@72Hz 37.861(-) 72.809(-)
640x480@75Hz 37.500(-) 75.000(-)
SVGA 800x600@56Hz 35,156(+) 56.250(+)
800x600@60Hz 37.879(+) 60.3!7(+)
800x600@72Hz 48,077(+) 72.188(+)
800x600@75Hz 46.875(+) 75.000(+)
XGA 1024x768@60Hz 48.363(-) 60,004(-)
1024x768@70Hz 56.467(-) 70.069(-)
1024x768@75Hz 60.023(+) 75.029(+)
OTHER 720x400@70Hz 31.469(-) 70.087(+)
17
Table of contents
Other VIORE Monitor manuals
