the device from overheating and possible auto ignition. Do not
block the ventilation holes. Install the device according to the
manufacturer's instructions. Never block the ventilation holes by
placing the device on a bed, sofa, rug, or similar soft surfaces.
This device should not be installed in a bookshelf or built-in
wardrobe unless adequate ventilation is ensured.
Overload
Never overload mains sockets, extension cords or multiple
sockets, otherwise there is a risk of re or electric shock.
Maintenance
Never attempt to carry out the maintenance of this device
yourself, because live parts can be exposed through the
openings or by removing covers, contacting which can be
hazardous. Leave all maintenance work to qualied service
personnel.
Damage requiring repair
Maintenance and repair work should only be carried out by
a qualied customer service.
Maintenance/repair is required if the device has been damaged
if liquid has entered the device, if objects have entered the
device, if the device has been exposed to rain or moisture,
when it stops working properly or has fallen down.
Heat
Do not install the device near hot surfaces, such as radiators,
fan heaters, stoves or other devices (including ampliers)
that can be hot. Never place objects with open ame, such
as candles or lanterns, on or near the device. The installed
batteries should not be exposed to excessive heat such
as direct sunlight, re or the like.
Battery and accumulator
If you do not use the device for a month or more, remove the
battery from the battery compartment of the remote control
to prevent leakage. Immediately dispose of leaking batteries
properly and observe all legal regulations. Leaking batteries
can cause injury and damage the device.To minimize the risk of
electric shock, re, etc.
Caution:
Important for laser products (class 1)
Do not open the casing (Besides of accessing the
compartment for the accumululator)
The device contains no user serviceable parts;
Maintenance should only be carried out by qualied
personnel. Open the compartment for the
accumulator only in case of switched of and
completely disconnected from the mains power grid.
