Vision Audio Visual TECHCONNECT TC2-VGAHDMI User manual
1
TC2-VGAHDMI_manual_en
TECHCONNECT TC2-VGAHDMI
OWNERS MANUAL
3
TC2-VGAHDMI_manual_en
DECLARATION OF CONFORMITY
Where applicable Vision products are certified and comply with all known local regulations to a
„CB Certification‟ standard. Vision commits to ensure all products are fully compliant with all
applicable certification standards for sale in the EU and other participating countries.
The product described in this owner manual is in compliance with RoHS (EU directive
2002/95/EC), and WEEE (EU directive 2002/96/EC) standards. This product should be returned
to the place of purchase at the end of its useful life for recycling.
WARNINGS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous voltage” within the product‟s enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle, is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
All products are designed and imported into the EU by „Vision‟ who is wholly owned by „Azlan
Logistics Ltd.‟, Registered in England Nr. 04625566 at Lion House, 4 Pioneer Business Park,
Clifton Moor, York, YO30 4GH. WEEE Registration: GD0046SY
DECLARATION OF ORIGIN
All Vision products are made in the People‟s Republic of China (PRC).
4
TC2-VGAHDMI_manual_en
USE ONLY DOMESTIC AC OUTLETS
Connecting the unit to an outlet supplying a higher voltage may create a fire hazard.
HANDLE THE POWER CORD WITH CARE
Do not disconnect the plug from the AC outlet by pulling the cord; always pull the plug itself.
Pulling the cord may damage it. If you do not intend to use your unit for any considerable
length of time, unplug the unit. Do not place furniture or other heavy objects on the cord, and
try to avoid dropping heavy objects on it. Do not tie a knot in the power cord. Not only could
the cord be damaged, but a short circuit could also be caused with a consequent fire hazard.
PLACE OF INSTALLATION
Avoid installing this product under the following conditions:
• Moist or humid places
• Places exposed to direct sunlight or close to heating equipment
• Extremely cold locations
• Places subject to excessive vibration or dust
• Poorly ventilated places
Do not expose this product to dripping or splashing. DO NOT PLACE OBJECTS FILLED WITH
LIQUIDS ON OR NEAR THIS PRODUCT!
MOVING THE UNIT
Before moving the unit, be sure to pull out the power cord from the AC outlet and disconnect
the interconnection cords with other units.
WARNING SIGNS
If you detect an abnormal smell or smoke, turn this product off immediately and unplug the
power cord. Contact your reseller or Vision.
PACKAGING
Save all packing material. It is essential for shipping in the event the unit ever needs repair.
IF ORIGINAL PACKAGING IS NOT USED TO RETURN THE UNIT TO THE SERVICE CENTRE,
DAMAGE IN TRANSIT WILL NOT BE COVERED BY WARRANTY.
5
TC2-VGAHDMI_manual_en
FRONT AND REAR PANELS
① ③②
1. Reset button
2. 2 x Phono (analogue audio input)
3. VGA Input
④ ⑧⑤ ⑥ ⑦
4. VGA Output (for local display)
5. 3.5mm Minijack analogue audio output (for local audio system)
6. HDMI Output
7. Status/Power Lights
8. 5V 2A Power input
6
TC2-VGAHDMI_manual_en
INSTALLATION
1. CONNECT INPUTS This product takes VGA and audio signals and merges them into HDMI
signal. Audio connection is optional.
2. CONNECT OUTPUT Use a high quality cable to connect the HDMI output to display device.
3. CONNECT POWER With the switch off at the wall, connect power adaptor.
4. TURN POWER ON FOR ALL DEVICES The sequence does not matter.
5. ADJUST IMAGE The TC2-VGAHDMI will automatically adjust the image. Press reset to re-
calibrate the image.
NOTE: If the LED is red there is a problem with the connection or resolution output from the
computer.
SUPPORTED RESOLUTIONS
640 x 480 60Hz
800 x 600 60Hz
1024 x 768 60Hz
1280 x 768 60Hz
1280 x 960 60Hz
1280 x 1024 60Hz
1600 x 1200 60Hz
7
TC2-VGAHDMI_manual_en
DETAILED HDMI INFORMATION
Analogue Video Input Front End Interface
Triple ADC with 12 - 140 MHz Sampling Rate
Integrated line locked PLL generates pixel clock from HSYNC
Integrated 5-bit pixel clock phase adjustment for precise sample timing control
Integrated clamp with timing generator
Integrated Brightness & Contrast controls
Integrated precision voltage reference
Compatible with VGA through SXGA RGB graphics signals
Mid-Scale Clamping
Fully Sync Processing
Black and mid-level precision clamp and calibrationx
Input video mode status detection
Digital Video Input Front End Interface
IRGB 444 ……8/10/12 bits/channel ....….1/ 3 channel
Multi-format digital input up to 200M Pixel/sec
Video data input pins re-order function
Input video mode status detection
Inverse Gamma Correcting (De-Gamma)
Programmable Data Enable (DE) generator
Programmable Vertical Sync (VS) generator
Programmable Horizontal Sync (HS) generator
Digital Data Link Engine
HDMI 1.1/1.0
HDCP 1.1/1.0
DVI 1.0
Supports video optional formats: EIA/CEA-861-B
Analog TMDS Interface
TMDS data link up to 2.0G-bit/s each channel
Including 3 data channel and 1 clock channel
Hot Plug detection
TMDS Clock Channel Plug detection
8
TC2-VGAHDMI_manual_en
TROUBLESHOOTING
If your system is not operating properly, please refer to the following information. If the
problem persists, disconnect from power and contact your AV reseller immediately.
Problem
Correction
No status light
Check input and output cables
Check source is turned on
Status light flashing
Reduce resolution of source to match display device.
Check HDMI output cable
No power light
Try alternative power supply
SPECIFICATIONS
PRODUCT DIMENSIONS: 89 x 68 x 29 mm (length x width x height)
PRODUCT WEIGHT: 0.68 kg
CONSTRUCTION MATERIAL: Aluminium
COLOUR: White
TECHNICAL DETAILS:
Maximum Supported Video Format: 1600×1200/60HZ
Operating Temperature Range: -5 to +35°C (-41 to +95 °F)
Operating Humidity Range: 5 to 90 % RH (no condensation)
Power Consumption: 10 watts (Max.)
INPUTS:
1 x VGA (15-pin d-sub)
1 x Stereo Audio (Minijack 3.5mm)
OUTPUTS:
1 x HDMI (type A)
1 x VGA (15-pin d-sub)
1 x Stereo Audio (2-phono)
POWER SUPPLY: 100-240v 50/60Hz AC External Power Supply –integrated transformer/plug
type. DC Output 5V 2A, DC Cable 1.8m. Transformer dimensions: 76 x 44 x 26mm.
Interchangeable prongs including UK, EU, AU, US.
Note: a normal figure-8 cable can be plugged into the transformer if preferred.
COMPLIANCE RoHS, WEEE & CE Compliant
9
TC2-VGAHDMI_manual_en
WARRANTY
This product comes with a 2-year return to base warranty, effective from the date of purchase.
This warranty applies only to the original purchaser and is not transferable. For the avoidance of
doubt, this will be taken from the information held by the appointed national distributor at the
point of sale. If the product is DOA (dead on arrival), you have 21 days from purchase date to
notify the national distributor via your AV reseller. The liability of the manufacturer and its
appointed service company is limited to the cost of repair and/or replacement of the faulty unit
under warranty, except for death or injury (EU85/374/EEC). This warranty protects you against
the following:
• Failure of any components, including the power supply.
• Damage when the product is first removed from its packaging if reported within 24 hours of
purchase.
If you find you do have a problem with this product, you should contact the AV reseller you
purchased this product from. The original purchaser is responsible for shipment of the product
to the manufacturer‟s appointed service centre for repair.
We will endeavour to return repaired units within 5 working days, however this may not always
be possible, in which case it will be returned as soon as practicably possible. In line with our
WEEE commitments, the manufacturer endeavours to replace the faulty parts of the product
rather than replacing the whole unit. This warranty does not protect this product against faults
caused by abuse, misuse, incorrect installation, unstable or faulty power input, which might be
caused by ignoring the guidelines set out in this manual.
LEGAL DISCLAIMER: Because we are committed to improving our products, the details above
may change without prior warning. This User Manual is published without warranty and any
improvements or changes to the User Manual necessitated by typographical errors, inaccuracies
of current information, or improvements to programs and/or equipment, may be made at any
time and without notice. Such changes will be incorporated into new editions of the User
Manual.
Table of contents
