Vista TEAM04 Instruction Manual

TEAM04 / TEAM16
RS485 network interface for Triplex Columbus text logging
Installation & User Manual

Description
The 'TEAM04 / TEAM16' is an interface that allows connection
of multiple data sources to the Columbus Triplex digital
recorder to utilise its text logging feature.
The ‘TEAM04’ allows up to 4 Till interface slave devices to be
connected and the ‘TEAM16’ gives a maximum of 16.
Manufacturer’s declaration of Conformance
The manufacturer declares that the equipment supplied with
this manual is compliant with the provisions of the EMC
Directive 89/336 EEC, the Low Voltage Directive LVD73/23
EEC and all associated amendments
EN50081-1 Emissions
EN61000-3-2 Emissions
EN61000-3-3 Emissions
EN50082-2 Immunity
EN60950 Safety
TEAM Manual V1.0 2

Supplied
TEAM04 / TEAM16 unit
Data cable
Mains power supply adapter
TEAM Manual V1.0 3
This Instruction Manual

User Instructions
TEAM Manual V1.0 4
Please refer to Triplex and WaveReader Manuals for
Instructions on how to View/Replay/Search on text data.

Controls and Indicators
Front panel
The front panel of the unit has 3 LED indicators - one to show
when power is connected and two to indicate the status of the
device as follows:
When the unit is powered up, it performs a self test, status
light B will illuminate to indicate the test has completed
successfully and that the unit is functioning correctly. Status
light A will flash whenever data is received at the RS485 input.
Rear panel
On the rear of the unit there is a bank of 8 DIP switches,
numbers 1 – 4 are used for Event/Alarm Settings, 5 – 7 are
not used, switch number 8 is the RS485 termination switch -
with the switch in the ON position, the device is terminated.
TEAM Manual V1.0 5