viveroo one User manual

Installation guide
viveroo one
!
REV20191001

Safety information
! Important
Please read the assembly instructions included carefully before
installing the MountingSet. Please also read the one user manual
completely before using your one. Please follow the instructions and
recommendations to ensure proper use and maximum enjoyment.
Safety
information
one and all one mounting sets are intended for use in enclosed and dry
living spaces.
The following conditions must be provided:
-Operating temperature between 0° C (32° F) and 35° C (95° F).
-Relative humidity (during use): 20!% to 90!%, non-condensing.
-No external environmental influences such as oil, chemicals, salt,
extensive dust, etc.
Installation, service or repairs, if necessary, may only be performed by
authorized persons.
The installer is responsible for selecting the proper mounting location
and safe installation of one. This also applies to installation in movable
parts, such as doors. The installer is responsible for performing and
documenting all necessary safety tests.
All electrical installation work may only be conducted by authorized,
trained electricians, always adhering to the general rules and
regulations applying to electrical installation.
Should it become apparent that safe operation of one is not assured,
then one must immediately be taken out of service and secured
against potential misuse. If the one functions are limited, blocked or
disabled, if an unusual odor is present, if noises such as scratching are
audible or damage is visible, safe operation can no longer be
guaranteed.
!

Technical data
Measurements
in millimeter
Measurements design cover
one for …
… iPad mini 4/5
… iPad 10.2 inch (09/2019), Air (2019),
Pro 10.5 inch
… iPad Pro 11 inch
… iPad Pro 12.9 inch (2018)
225 x 143
267 x 164
277 x 173"
275 x 178
307 x 215"
Depth"
14
Size of opening
(for flush-mounted box)"
elongated hole 68x139
Installation depth "
(for flush-mounted box)
75
Weight in gram
one for …
… iPad mini 4/5
… iPad 10.2 inch (09/2019), Air (2019),
Pro 10.5 inch
… iPad Pro 11 inch
… iPad Pro 12.9 inch (2018)"
740
866"
952"
1.118
Electrical
connections
Power supply
Power consumption
100-240 Vac
50-60 Hz
12,5Watt - 18Watt,
depending on iPad and
power supply"
Removal from
power supply
one may be removed from the power supply via the circuit breaker in
the respective rooms.
Technical changes and mistakes are excepted."
Apple, iPad and Lightning are registered trademarks of Apple Inc.
Product
contents
- Installation guide Inwall
USB Power Adapter USB-C: 100-240Vac, 50/60Hz, PD 3.0, "
up to 18W
-For POE: "
Lightning: IN: (IEEE 802.3af) 44-57V, 12W, OUT: 5V, 10/100 Data"
USB-C: IN: PoE+ (IEEE 802.at), 25W, OUT: USB-C PD+Gigabit Data

Installation with wallbox
Step 1
one can be installed either in portrait or landscape
position, it is your choice.
For installation in landscape position:
Make an elongated hole in the wall (68mmx139mm). Use
a holesaw (two holes next to each other with 68mm
diameter, center distance 71mm).
For installation in portrait position:
Use a holesaw and make two holes among each other
with 68mm diameter, center distance 71mm.
The backside of the flush-mount box can be used as a
template. The depth should be approximately 75mm.
! Important: This installation guide shows the installation
process for a drywall. Here one is installed in landscape
position."
Step 2
Cut a hole for the cable in the flush-mount box. Use the
diagonal surfaces of the box for the cut. (See photo.) Cut
the hole from the back side of the box. Make the hole
correspond to the size needed for the cable.
If needed please prepare a second hole for the network
LAN cable.
Step 3
Insert the wallbox with the pre-installed installation disc
into the opening in the wall. Pull 10-15 cm of the power
cable through the opening.
For free in landscape position:
The integrated level will show you the 12 o’clock “UP"
position. Adjust the flush mount box according to the
level. (Final adjustments can be made at a later time.)
For free in portrait position:
The integrated level is in 3 o’clock position. Use an
external level to align the box vertically.
Step 4
For drywall installation:
Fasten the flush-mount box to the wall.
For stone or solid wall installation:
Let the black installation disc mounted so that the flush
mounted box is not deformed in any way.
! IMPORTANT: During installation, pay attention that the
flush mount box is fastened parallel to the surface and is
not shifted or offset in the wall.
! IMPORTANT: It is important that the flush mounted box
is not deformed in any way. Do not use any foaming
installation materials that may put pressure on the box
and deform it.
optional article: One with network connection via POE. "
Not for retrofit. Please order together with one.

Installation with wallbox Product
dimensions and position of wallbox
one for …
… iPad mini 4/5
… iPad Pro 12.9 inch (3rd Generation 2018)
… iPad 10.2 inch (09/2019), Air (2019),
Pro 10.5 inch
… iPad Pro 11 inch

Installation with wallbox (100-240V or PoE)
(Technical drawing)!
side view
from left to right: wallbox, wall, wall
spacer, one
back view
! Attention: Measurements show free for iPad 9.7 inch.
Measurements for other generation on previous page.
The size of free varies depending on the iPad generation. Mounting
plate is always the same, it allows you to change iPad generation
easily."
Scale-ready drilling template at https://
www.viveroousa.com/technical

Installation direct mounting
The one can be attached directly to the wall via 3 points.
A distance from the wall ensures a secure hold and compensates for any unevenness. Use the enclosed dowels and
screws for installation in concrete or solid wall.
Use the drilling templates to optimally position the one against the wall.
Download at: https://www.viveroousa.com/technical

Installation direct mounting (100-240V or
POE) Technical drawing
side view
from left to right: wall, wall spacer,
one
Note:
Use holesaw 40mm
to put the connector through.
back view
! Attention: Measurements show free for iPad 9.7 inch.
Measurements for other generation on previous page.
The size of free varies depending on the iPad generation."
Scale-ready drilling template at
https://www.viveroousa.com/
technical

Mounting Direct Screw Connection
Product Dimensions
… iPad mini 4/5
… iPad Pro 12.9 inch (3rd Generation 2018)
… iPad 10.2 inch (09/2019), Air (2019),
Pro 10.5 inch
… iPad Pro 11 inch

Notes on PoE splitters
PoE Splitter for iPads with Lightning connector
PoE Splitter for iPads with USB-C connector
Note: Use orange wallbox and installation plate to
fix viveroo free on the wall. Put the white PoE
splitter outside the orange box as it can get very
warm at ligh load. Please also note the enclosed
instructions of the PoE Splitter.We recommend to
put the orange wallbox into a bigger installation
housing or into a cavity wall with enough space.
[email protected] 1-800-541-4830