Vivitar ViviCam T119 User manual

ViviCam T119 Digital Camera
User Manual
© 2009-2012 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.

1
Table of Contents
Introduction .................................................................................................................................. 2
What’s Included............................................................................................................................ 2
Parts of the Camera..................................................................................................................... 3
Initial Camera Setup..................................................................................................................... 4
Main Camera Modes.................................................................................................................... 7
Camera Technical Specifications.................................................................................................. 8
Computer System Requirements ................................................................................................. 9
Powering the Camera On/Off..................................................................................................... 10
Photo Capture Mode...................................................................................................................11
Video Capture Mode .................................................................................................................. 16
Playback Mode........................................................................................................................... 18
Installing the Software................................................................................................................ 21
Connecting the Camera to the Computer................................................................................... 22
Getting Photos and Videos from your Camera to Your Computer.............................................. 23
Get Started!................................................................................................................................ 24
Transferring Images from my Camera to my Computer Manually.............................................. 24
Camera Maintenance................................................................................................................. 26
Sakar Warranty Card.................................................................................................................. 26
Technical Support....................................................................................................................... 27
Troubleshooting.......................................................................................................................... 27

2
Introduction
Thank you for purchasing this camera. Everything you need to take quality digital photos and
videos is included with your camera.
Vivitar makes capturing those special moments as easy as possible.
Please read this manual carefully first in order to get the most out of your digital camera.
Note: Your camera needs an SD Memory card (up to 32GB) for normal use.
SD Memory cards are not included and need to be purchased separately.
What’s Included
1. Digital Camera
2. USB cable
3. Vivitar Experience Image Manager
Software Installation CD
4. Wrist Strap
Note: SD Memory Card and batteries not included.

3
Parts of the Camera
1. Power Button
8. Down / Playback Button
2. Shutter Button
9. Up / Flash Button
3. LCD Screen
10. SD Memory Card Slot
4. LED
11. Wrist Strap Connector
5. W / Zoom Out
12. USB Port
6. T / Zoom In
13. Tripod Socket
7. MENU Button
14. Digital Lens
Note: The battery compartment is located beneath the front cover of the camera.

4
Initial Camera Setup
Installing the Batteries
Installing the Memory Card
Slide off the front cover and insert 2x
AAA (1.5V) batteries.
Alkaline batteries recommended
(not included).
SD Memory card (up to 32GB)
needed for normal use.
Turning On the Camera
Using the Camera

5
Powering the Camera ON
1) Batteries
Slide the front cover of your camera towards the right to reveal and open the battery
compartment.
Make sure to properly insert the batteries into your digital camera, according to the polarity
shown inside the battery compartment.
Use 2 x AAA (1.5V) batteries. Alkaline batteries are recommended. (Batteries not included.)
Place the camera front cover on the front of the camera and slide the camera front cover
towards the left to securely close the cover back into place. A click will be heard once the
camera front cover has been locked into place.
Note:
Remove the batteries from the camera when not in use for an extended period.
Do not mix alkaline and non-alkaline batteries.
Some features will not work, such as Flash, if the battery power level is low.
When the battery power is low the battery icon turns red and the camera will
automatically turn off a few seconds later.
Rechargeable batteries not recommended.
The energy status of the power is displayed on LCD as shown below:
Full battery power Medium battery power Low battery power
2) SD Card
Make sure an SD card has been properly inserted into your camera. (SD card not included.)
To properly insert the SD Card:
Push the SD card into the slot in the direction shown on the camera (see SD icon by the SD
card slot). Push the SD card until you hear a slight clicking sound. This indicates the SD
card has been inserted correctly.

6
Note:
After the camera is powered on, an SD icon will appear on the LCD display. If you do not
see the SD icon on the display, please check if the card was inserted properly.
Make sure the SD card is not locked (check the lock switch on the side of the SD card). If
the SD card is locked this will prevent the camera from saving captured photos to the SD card.
3) Power On
Press the POWER button to turn on the camera.

7
Main Camera Modes
Your camera has different modes for the various camera functions.
You can switch modes by pressing the MENU button on your camera after the camera has been
powered ON.
Photo Capture Mode
Use this mode to capture pictures with your camera.
This is the default mode when the camera is powered ON.
To take a picture, aim your camera as desired and press the Shutter button.
The picture will be automatically saved to your camera’s memory card. To access the
various menus for the Photo Capture Mode, press the MENU button.
Video Capture Mode
Use this mode to capture videos with your digital camera.
After turning on your camera, press the MENU button to open the ‘MODE’ and select ‘AVI’.
To take a video, aim your camera as desired and press the Shutter button to start the
record. A red record indicator will appear on the LCD screen while record is in progress. To
stop the record, press the Shutter button again. The video will be automatically saved to
your camera’s memory card. To access the various menus for the Video Capture Mode,
press the MENU button.
Playback Mode (Photos & Videos)
Use this mode to view and manage the photos and videos on your camera.
After turning on your camera, press the PLAYBACK button to open the Playback mode for
photos and videos. You can scroll through the photos and videos that you’ve previously
taken to view, edit or delete them as desired.
To access the various menus for the Playback mode for photos and videos, press the
MENU button while in the Playback mode.

8
Camera Technical Specifications
Image Sensor
CMOS
Image Resolution
4032x3024 (12.1M 4:3), 3264 X2448 (8MP 4:3),
3072x2304 (7MP 4:3), 3648x2048 (7M 16:9HD), 2592x1944 (5M
4:3), 2048x1536 (3M 4:3), 1600x1200 (2MP 4:3),
1920x1080 (2M 16:9HD)，640X480 (VGA 4:3)
Video Resolution
640x480 VGA, 320x240 QVGA
File Format
JPEG (Photo) /AVI (Video)
Internal Memory
1 Test Photo Use Only
External Memory
SD Card (up to 32GB)
LCD Display
1.8”TFT
Lens
f=7.0 mm F3.0
Zoom
4X Digital Zoom
Language
English, French, Spanish, Portuguese, German,
Dutch, Italian, Russian, Turkish
Flash
No Flash, Forced On, Auto Flash
Print
Yes
Exposure
Auto
White Balance
Auto
ISO
Auto
Scene
Auto
Auto Power Off
60 second default
Self-Timer
10 seconds, Off
Interface
USB 2.0
System Requirements
Windows XP (SP 3), Vista (SP1) and 7 ;
Mac OSX v10.5.x and above
Battery
2 x AAA (1.5V) batteries
Working Temperature
0~40C

9
Computer System Requirements
WINDOWS OS
To be able to download photos and videos to your PC using the Vivitar Experience Image
Manager Software, you will need the following minimum configuration:
Microsoft® Windows XP with Service Pack 3,Windows Vista with Service Pack 1 or Windows 7
Pentium® 4 processor (or above)
1 GB of RAM, with 250 MB of free hard disk space
16-bit Color monitor, 1024 X 768 recommended screen resolution
CD-ROM Drive
QuickTime® 6 or higher
Microsoft® Internet Explorer 7 or higher
Windows Media Player 10 or higher
DirectX 9 or higher
Internet connection required
MACINTOSH OS
To be able to download photos and videos to your Macintosh using the Vivitar Experience Image
Manager Software, you will need the following minimum configuration:
Intel processor running Mac OS X v10.5.x or later
1 GB RAM, 250 MB free hard disk space
Display: 1024 x 768 or higher-resolution monitor
QuickTime® 6 or higher
CD-ROM Drive
Internet connection required

10
Powering the Camera On/Off
Make sure the batteries have been inserted properly into your digital camera. If your camera
comes with a rechargeable lithium battery, make sure it is fully charged before the first use.
Make sure an SD card has been inserted into your camera.
(SD card up to 32GB - SD Card not included)
Please see Initial Camera Setup for more information.
Powering the camera ON
Press the Power button to turn your camera ON.
After powering on, the camera emits a sound and the LED light turns on briefly.
The LCD screen turns on with your camera in Photo Capture mode to start.
Powering the camera OFF
While the camera is on, you can press the Power button again at any point to turn your
camera OFF.
A “Goodbye” screen appears and then the camera will power off completely.
Note: Your digital camera also has an Auto Power Off feature that will automatically turn off your
camera after 1 minute.

11
Photo Capture Mode
The Photo Capture mode allows you to capture pictures with your digital camera.
This is the default mode when the camera is powered on.
Taking photos
1) Power on your camera. The default mode is Camera mode.
2) Hold the camera steady and compose your photo using the LCD screen.
3) Press the Shutter button and wait a moment for the photo to be taken.
If you have changed the camera mode and would like to return to the Photo Capture Mode:
1) Press the Menu button.
2) Press the Up/Down button and select MODE.
3) Press the Shutter button.
4) Press the Up/Down button and select SINGLE.
5) Press the Shutter button again to confirm. You are now in default camera mode.
Note: When the internal memory is full, the LCD screen will display “Memory Full! Insert a SD
Memory Card to Transfer and Take More Photos!” If you attempt to take photos or videos when
the camera’s internal memory is full, the camera will beep continuously. Please download the test
images to your computer using the Vivitar Experience Image Manager software as described
below in the section “Transfer photos and videos to your computer” as soon as possible or insert
an SD memory card in order to take more images!
Flash Options
Your camera has a built in flash function which enables you to take photos in poor lighting
conditions.
There are several Flash options available on your camera. The options appear on the Photo
Capture Mode LCD screen in sequence.
To change the Flash mode, press the Up /Flash until you arrive at your desired settings.

12
Important: When using Flash, stand between 8 to 10 feet away from the scene you would like to
capture.
Flash Type
Description
Forced Off (Default)
No flash will appear.
Use this when you do not want to activate Flash.
NOTE: A ‘Turn On Flash’ message appears when the camera
detects a need for flash. When this message appears, it is
recommended to press the Flash/Up button and select one of the
flash options: Auto Flash, Forced On or Red-Eye Reduction.
A
Auto Flash
When you want the camera to determine if Flash is needed, select
Auto Flash.
The flash will automatically turn on according to the lighting
conditions.
When the LED light stops blinking, the Flash is ready for use.
Note: In some cameras, an initial flash appears to test your
lighting conditions. If flash is needed, a second flash will appear
upon taking the photo.
Forced On
The flash is enabled for each photo.
Note: If you use this option in a well lit environment, your photo
may be appear too bright/light (overexposed).
Note: A “Low Power” message will appear on the LCD screen, if you select the flash function
when the battery power is insufficient. To continue using the camera with the flash, please install
new batteries.

13
Digital Zoom function
You can magnify your subject using the digital zoom.
Use the Tand Wbuttons to adjust the zoom.
1) Press the Tbutton to zoom in on your subject.
2) Press the Wbutton to zoom back out.
Self Timer
The Self Timer menu allows you to set a delay between the time that the camera’s Shutter button
is pressed and the actual capture of the picture.
This is an optimal feature if you don’t just want to take the picture but would also like to be in the
picture yourself. Just set the Self Timer delay, press the Shutter button on your camera and
position yourself in front of the camera as desired.
It is recommended that you use a tripod when you use the Self Timer.
1) Press the Menu button.
2) Press the Up/Down button and select MODE.
3) Press the Shutter button.
4) Press the Up/Down button and select SELF.
5) Press the Shutter button again to confirm. An icon will appear on the top left corner of the
LCD.
6) Press the Shutter button to begin taking the photo. Your camera will emit beeps and after a
count-down of 10 seconds the photo will be taken.
Change Image Resolution
The Image Resolution menu allows you to choose the desired size of the images taken by your
camera. Keep in mind that images with a higher resolution will also take up more of your
camera’s memory.
1) Press the Menu button.
2) Press the Up/Down button to select the RESOLUTION option.
3) Press the Shutter button.

14
4) Press the Up/Down button to select one of the following resolutions:
12M / 8M / 7M / 7MHD / 5M / 3M / 2M / 2MHD / VGA.
5) Press the Shutter button again to confirm your selection.
6) The corresponding icon will appear on the LCD screen.
Note:
Different image resolutions will affect the photo quality. High resolution photos will be of better
picture quality and therefore will take up more camera memory capacity than lower resolution
photos.
In order to change the image resolution setting to take high resolution photos, an SD memory
card needs to be inserted.
Frequency Settings
The options in the Frequency menu represent the frequency of the electrical current in
fluorescent lighting sources in your locale. If your camera is set to a frequency that does not
match your country’s electric current, you may see waves on the images taken by your camera.
50Hz –UK, Europe and Australia
60Hz –US, Canada and SouthAmerica
1) Press the Menu button.
2) Press the Up/Down button to select the FREQUENCY option.
3) Press the Shutter button.
4) Press the Up/Down button to select 50HZ or 60HZ.
5) Press the Shutter button to confirm.
Anti-Shake Function
The Anti-Shake feature reduces image distortion that can be caused by movement of the camera
while capturing the image.
1) Press the Menu button.

15
2) Press the Up/Down button and select the ANTI-SHAKE option.
3) Press the Shutter button.
4) Use the Up/Down button to select either:
“ON” to turn the Anti-Shake on.
“OFF” to leave or turn the Anti-Shake off.
5) Press the Shutter button to confirm.
Language Setting
You can select your camera’s language setting by selecting the desired language from the
Language menu.
1) Press the Menu button.
2) Press the Up/Down button and select LANGUAGE.
3) Press the Shutter button.
4) Press the Up/Down button to select from the following options:
English, French, Spanish, Portuguese, German Dutch, Italian, Russian, Turkish
5) Press the Shutter button to confirm.
Default Setting
Use this menu to reset your camera settings to the original Factory Default Settings.
1) Press the Menu button.
2) Press the Up/Down button and select DEFAULT.
3) Press the Shutter button.
4) Press the Up/Down button to select “Yes” or “No”.
5) Press the Shutter button to confirm.

16
Video Capture Mode
The Video Capture Mode allows you to capture videos with your digital camera.
When the camera is first powered ON, the camera will be in Photo Capture Mode.
To set your camera to Video Mode:
1) Power on your camera.
2) Press the Menu button.
3) Press the Up/Down button to select MODE.
4) Press the Shutter button.
5) Press the Up/Down button again to select the AVI option.
6) Press the Shutter button again to confirm. Avideo icon appears on the upper left corner
of the LCD.
7) Press the Shutter button to start shooting the video. The elapsed time appears on the
bottom right of the LCD. For the duration of the recording the LED indicator light will
continue to flicker and a red indicator blinks on the LCD screen.
8) Press the Shutter button to stop the recording.
9) The video will be saved as anAVI file on the SD memory card.
Note: “Memory Full Insert an SD Memory Card” appears on the LCD screen if you press the
Shutter button without having inserting the SD memory card into your camera.
To capture your videos, insert the SD memory card into your camera.
Change Image Resolution
1) Select the Video (AVI) Mode option (see steps above for instructions).
2) Press the Menu button.
3) Press the Up/Down button to select the RESOLUTION option.
4) Press the Shutter button.
5) Press the Up/Down button to select one of the following resolutions:
VGA or QVGA.

17
6) Press the Shutter button again to confirm your selection.
7) The corresponding icon appears on the LCD screen.
Note:
Different image resolutions will affect the video quality. High resolution videos will be of better
picture quality and therefore will take up more camera memory capacity than lower resolution
videos.
In order to change the image resolution setting to take high resolution photos, an SD memory
card needs to be inserted.

18
Playback Mode
The Playback Mode allows you to review and delete photos and videos that you’ve already taken
with your camera.
When you first turn on the camera, the camera will be in Photo Capture mode by default.
Press the Playback button to open the Playback Mode.
The latest captured image appears on the LCD screen. If there are no images stored, a
message (No File) appears.
1) Power on your camera.
2) Press the Down/Playback button to enter the Playback Mode.
3) The Playback icon appears on the upper left corner of the LCD.
4) Press the Shutter button to exit to return to Photo Capture Mode.
Preview Photos
To view your captured photos:
1) Press the Down/Playback button to enter Playback Mode.
2) Press the Up/Down button to select and view your photos (and videos).
3) “JPG” appears on the image if you have selected a photo.
“AVI” appears on the LCD when you select an AVI file.
4) To zoom into your selected photo:
Press the Tbutton to zoom.
Press the Wbutton to zoom out.
Press the Up/Down button to move up or down within your zoomed in photo.
Playback Video (AVI) files
1) Press the Down/Playback button to enter Playback Mode.
2) Select an AVI file in your SD memory card by pressing the Up/Down button.
3) Press the Menu button.
4) Press the Up/Down button to select the PLAY option.

19
5) Press the Shutter button to start playing.
6) Press the Shutter button again to stop playing.
Thumbnail View
Easily navigate and select the image you wish to view by using the Thumbnail View.
The images on your camera will be displayed in a 3 X 3 matrix where you can use the direction
buttons to scroll and select images from the thumbnails.
1) Press the W/Zoom Out button
All the images on your camera will appear in the Thumbnail View.
2) Use the Up/Down button to scroll and select the image you wish to view.
3) Press the Shutter button to enlarge the image to full size.
4) Once the selected video or photo is full size you can play and view the video or magnify the
photo.
Delete Photos and/or Videos
You may delete images directly from the memory card on your camera. The images can only be
deleted while in the Playback mode.
1) In Playback mode, select the image you would like to delete.
2) Press the Menu button.
3) Press the Up/Down button to select DELETE.
Press the Shutter button and select one of the following options:
“Delete One” in order to delete the selected image (photo or video).
“Delete All” to delete all the files (photos and videos) saved to your SD memory card.
4) Press the Shutter button.
5) Press the Up/Down button to select either “Yes” or “No”.
6) Press the Shutter button again to confirm your choice.
If you choose “Yes” the current file is permanently deleted. This action is irreversible.