Vivitar VIVICAM X026 User manual

ViviCam X026 Digital Camera
User Manual
© 2010 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.

1
Contents
Introduction.....................................................................................................................................................2
What Your Camera Includes............................................................................................................................2
Camera Technical Specifications.....................................................................................................................3
Computer System Requirements –Windows...................................................................................................4
Computer System Requirements –Macintosh.................................................................................................4
A Quick Look at your Digital Camera...............................................................................................................5
Charging the Lithium Battery...........................................................................................................................6
Initial Camera Setup........................................................................................................................................7
Using Your Digital Camera ..............................................................................................................................9
Changing Camera Mode .................................................................................................................................9
Navigating the Menus....................................................................................................................................11
Photo Capture Mode.....................................................................................................................................11
Photo Playback Mode ...................................................................................................................................30
Video Capture Mode .....................................................................................................................................36
Video Playback Mode....................................................................................................................................52
TV Out Function to Connect the Camera to a TV...........................................................................................55
Installing the Software...................................................................................................................................55
Connecting the Camera to the Computer ......................................................................................................58
Getting Photos and Videos from Your Camera to Your Computer..................................................................59
Get started! ...................................................................................................................................................60
Transfer media from my camera to my computer manually (Using Windows) ................................................61
Transfer media from my camera to my computer manually (Using Macintosh) ..............................................62
Camera Maintenance....................................................................................................................................62
Sakar Warranty Card.....................................................................................................................................63
Technical Support..........................................................................................................................................64
Troubleshooting.............................................................................................................................................65

2
Introduction
Thank you for purchasing this camera. Everything you need to take quality digital photos and videos is
included with your camera.
High Definition Resolutions and Water Resistant up to 10 feet /3 meters.
Vivitar makes capturing those special moments as easy as possible.
Note: Your camera needs an SD Memory card (up to 32GB) for normal use.
SD Memory cards are not included and need to be purchased separately.
Please read this manual carefully first in order to get the most out of your digital camera.
What Your Camera Includes
Digital Camera
Vivitar Experience Image Manager software Installation CD
USB cable
Lithium Battery
AC Adapter
Easy Guide
Strap
Warranty Certificate

3
Camera Technical Specifications
Image Sensor
CMOS Sensor
Image Resolution
4000x3000(12M),3264x2448(8M); 2592x1944(5M);2048x1536(3M);
640x480(VGA)
Video Resolution
640X480 pixels , 320X240 pixels
File Format
JPEG/AVI
Internal Memory
32MB
External Memory
SD Card (up to 32GB)
LCD Display
2.4 Inch TFT LCD
Lens
f=6.5mm F3.1
Zoom
4X Digital Zoom
Exposure
-3.0EV ~ +3.0EV
White Balance
Auto, Daylight, Cloudy, Incandescent , Fluorescent
ISO
Auto / 100 / 200 / 400
Scene
Auto / Scenery / Portrait / Night Scenery / Night Portrait / High Sensitivity
/ Sport / Beach / Party
Flash
Auto/Force/Red Eye/Off
Self-Timer
2,5or 10 sec delay
Anti-Shake
Yes
Print Photos
Yes
Multi Snapshots
Yes
Interface
USB 2.0
System Requirements
Windows XP and above / Mac OSX 10.5 and above
Battery
Lithium (3.7V)
Working Temperature
0~40 ℃

4
Computer System Requirements –Windows
To be able to download photos and videos to your PC, you will need the following minimum configuration:
Pentium 4 processor or above with Windows XP service pack 2, Windows Vista or Windows 7
512 MB RAM, with 100MB of free disk space
1024 x 768 Recommended screen resolution
16-bit color or higher display adaptor
CD-ROM Drive
QuickTime 6 or higher
Microsoft Internet Explorer 7 or higher
Windows Media Player 10 or higher
Internet connection required
Computer System Requirements –Macintosh
Macintosh with Intel processor running Mac OS X v10.5 or later
256 MB RAM, 100 MB free disk space
Display: 1024 x 768 or higher-resolution monitor
QuickTime 6 or higher
Internet connection required

5
A Quick Look at your Digital Camera
1. Strap Hole
2. Battery Cover
3. Shutter Button
4. Power Button
5. Lens
6. Flash Strobe
7. LCD Screen
8. Busy / Power Indicator LED
9. T / Zoom In Button
10. W / Zoom Out Button
11. Charger Indicator LED
12. Playback Button
13. Up / Display Button
14. Right / Flash Button
15. OK Button
16. Delete Button
17. Down / Mode Button
18. Menu Button
19. Left / Self-Timer Button
20. Tripod Socket
21. Microphone

6
Charging the Lithium Battery
Only use the Lithium Battery that is included in the packaging.
To charge the Lithium Battery insert the battery into the camera in the direction as shown.
Insert the battery with the positive (+) and negative (-) poles matching the directions indicated inside the
battery compartment.
1) Make sure the camera is powered off.
2) Plug in the AC Adapter included in the package and connect the other end to the USB slot of the camera.
3) Alternatively, connect the USB cable to the USB slot on the camera and to the USB port of your
computer.
4) The Charge LED on the back of the camera lights up.
5) When fully charged after a few hours the Charge LED will turn off.

7
Initial Camera Setup
When powering the camera ON for the first time the camera will take you through the initial camera setup.
Powering the Camera ON
1) Make sure the battery is fully charged before the first use.
2) Make sure an SD card has been inserted into your camera.
3) Make sure the battery cover is tightly closed and locked into place.
4) Press the POWER button to turn on the camera

8
Setting the Camera Language
1) You will first be prompted to select a language for the camera. The Language selection menu will appear.
Select the language of your choice and press the OK button to confirm the selection.
2) After selecting a language, you will be asked if you would like to continue with the initial camera setup. A
message will appear: “Continue with Camera Setup?” Select “Yes” to continue or “No” to exit the setup.
Note: If you select “No” and decide to leave the camera setup, the camera will be set to its default settings.
These settings can be adjusted at any time manually through the menus in the camera.
Setting the Date and Time
The next step in the initial camera setup is to set the date and time on the camera.
Set the Date and Time as Desired and press the OK button to confirm the selection and move to the next part
of the camera setup.

9
Using Your Digital Camera
Make sure the batteriy is fully charged before the first use.
Powering the camera ON
Press the Power button to turn your camera ON. The camera will be in Photo Capture mode to start.
Powering the camera OFF
While the camera is on, you can press the Power button again at any point to turn your camera OFF.
You will see a “Goodbye” splash screen and then the camera will power off completely.
Note: your digital camera also has an Auto Power Off feature that will automatically turn off your camera after
a specific period of time that your camera is left idle. The Auto Power Off settings can be set from the Auto
Power Off settings menu.
Changing Camera Mode
Your camera has three main modes:

10
1) Photo Capture Mode - Use this mode to capture photos with your camera.
2) Video Capture Mode - Use this mode to capture videos with your camera.
3) Playback Mode - Use this mode to view the photos and videos you have already taken with your camera.
When the camera is first powered ON, the Photo Capture Mode will be active. The icons that appear on the
LCD screen are the best default settings so that you can begin to capture and enjoy clear quality photos.
To change the active camera mode, make sure the camera is powered ON. Press the Down directional MODE
button to select the mode.
Press the Playback Button to open the Palyback mode.
When in Photo Capture Mode, this icon will display on the top-left corner of the LCD display
When in Video Capture Mode, this icon will display on the top-left corner of the LCD display
When in Playback Mode, this icon will display on the top-left corner of the LCD display

11
Navigating the Menus
Each camera mode has a set of menus specific to that mode. Press the MENU button to open the menus for
the current mode.
1) Press the LEFT or RIGHT direction control buttons to scroll between the various menus for the current
mode.
2) Press the UP or DOWN direction control buttons to highlight the desired menu selection.
3) Press the OK button to confirm and select the highlighted menu option.
4) If the selection can be remembered by the camera, a selection icon will appear to the right of the
selected menu option. Changes made to these options will remain as is until you decide to change them
again at a later time.
5) Some menu options are single-use functions that are not remembered by the camera and do not display
this icon when selected.
6) At any time you can press the MENU button to exit the menus and return to the previous screen.
Photo Capture Mode
The first mode to appear when the camera is first powered on is the Photo Capture mode.
Taking a Picture

12
1) While in Photo Capture mode, use the LCD display on the back of the camera to direct the camera at the
scene you would like to capture.
2) Click the T/Zoom In and W/Zoom Out buttons to zoom in/out if desired.
3) Click the Shutter button on the top of the camera to take the picture.
4) The picture will automatically be saved to the memory or SD card.
Photo Capture Mode Quick Function Buttons
Your digital camera has a four-directional pad that functions as Quick Function buttons:
Left
Self-Timer
Up
Display
Right
Flash
Down
Mode
Hide/Show the LCD Icons
The display of the icons on the LCD screen can be hidden or visible as desired.
1) Press the DISP button to hide the display of the icons on the screen.
2) Press the DISP button again for the screen to go blank.
3) Press the DISP button again to redisplay the icons on the screen.

13
Flash Options
There are several Flash options available on your camera. The options appear on the Photo Capture Mode
LCD screen in the sequence.
To change the Flash mode, press the Right Quick Function button until you arrive at your desired settings.
A
Forced Off (Default)
Red Eye
Auto Flash
Forced On
Self-Timer
Include yourself in the picture. Place the camera on a tripod or a flat and strudy surface.
1) Press the Right /Self-Timer button select the time delay.
2) Press the Shutter button and join the picture.
3) The camera will begin to emit beeps for every second of the 2, 5, or 10 seconds delay you selected.
4) The photo will be taken automatically.

14
Photo Capture Mode Menus
The following are the menus that appear in your camera‟s Photo Capture Mode:

15
Scene Menu
The Scene Menu allows you to choose scene settings that allow your camera to adapt properly to your current
environment.

16
1) Press the UP or DOWN direction control buttons to scroll through the menu options.
2) Press the OK button to select the desired option.
3) A selected option icon will appear on the selected item.
4) Press the LEFT or RIGHT button to select the next menu item.
5) Press the MENU button to exit the menu and return to your previous mode.
6) An icon reflecting your selection will display on the LCD screen.
7) Remember that this setting will be remembered by your camera until you manually change the setting or
restore the camera‟s default factory settings.
Image Resolution Menu
The Image Resolution menu allows you to choose the desired size of the images taken by your camera. Keep
in mind that images with a higher resolution will also take up more of your camera‟s memory.
1) Press the UP or DOWN direction control buttons to scroll through the menu options.
2) Press the OK button to select the desired option.
3) A selected option icon will appear on the selected item.
4) Press the LEFT or RIGHT button to select the next menu item.

17
5) Press the MENU button to exit the menu and return to your previous mode.
6) An icon reflecting your selection will display on the LCD screen.
7) Remember that this setting will be remembered by your camera until you manually change the setting or
restore the camera‟s default factory settings.
Image Quality Menu
The Image Quality menu allows you to select the desired quality level of the images taken by your camera.
Keep in mind that images with a higher image quality level will also take up more memory on your camera.
1) Press the UP or DOWN direction control buttons to scroll through the menu options.
2) Press the OK button to select the desired option.
3) A selected option icon will appear on the selected item.
4) Press the LEFT or RIGHT button to select the next menu item.
5) Press the MENU button to exit the menu and return to your previous mode.
6) An icon reflecting your selection will display on the LCD screen.
7) Remember that this setting will be remembered by your camera until you manually change the setting or
restore the camera‟s default factory settings.

18
Self-Timer Menu
The Self-Timer menu allows you to set a delay between the time that the camera‟s shutter button is pressed
and the actual capture of the picture.
This is an optimal feature if you don‟t just want to take the picture but would also would like to be in the picture
yourself. Just set the desired self-timer delay, press the shutter button on your camera and position yourself in
front of the camera as desired.
1) Press the UP or DOWN direction control buttons to scroll through the menu options.
2) Press the OK button to select the desired option.
3) A selected option icon will appear on the selected item.
4) Press the LEFT or RIGHT button to select the next menu item.
5) Press the MENU button to exit the menu and return to your previous mode.
6) An icon reflecting your selection will display on the LCD screen.
7) Remember that this setting will be remembered by your camera until you manually change the setting or
restore the camera‟s default factory settings.

19
Anti-Shake Menu
The Anti-Shake feature reduces image corruption that can be caused by movement of the camera while
capturing the image.
1) Press the UP or DOWN direction control buttons to scroll through the menu options.
2) Press the OK button to select the desired option.
3) A selected option icon will appear on the selected item
4) Press the MENU button to exit the menu and return to your previous mode.
5) An icon reflecting your selection will display on the LCD screen.
6) Remember that this setting will be remembered by your camera until you manually change the setting or
restore the camera‟s default factory settings.
White Balance Menu
The White Balance feature allows your camera to adjust the coloring of the captured images depending on the
type of light source in the current environment.
Properly adjusting the White Balance setting to match your current environment will allow the camera to
properly balance the colors in the images that are taken with your camera.