Vivitek H9080FD User manual

H9080FD
PROJECTOR
User’s Manual

2
Table of ConTenTs
Copyright Information...........................................................................................4
Copyright............................................................................................................................................................................... 4
Disclaimer .............................................................................................................................................................................4
About this manual..................................................................................................................................................................4
Important Safety Instructions..............................................................................5
FCC PART 15: ......................................................................................................................................................................6
INDUSTRY CANADA (ICES-003):....................................................................................................................................... 6
DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC EQUIPMENT............................................................................6
Introduction ..........................................................................................................7
1.1 About This Manual ............................................................................................................................................. 7
Target Audience .................................................................................................................................................................... 7
Textual and Graphic Conventions.........................................................................................................................................7
1.2 Using This Manual.............................................................................................................................................. 8
1.3 Description, Features and Benefits ..................................................................................................................... 9
Key Features and Benefits.....................................................................................................................................................9
Additional Features of the H9080FD..................................................................................................................................10
Parts List ............................................................................................................................................................................. 10
Controls and Functions ......................................................................................11
2.1 H9080FD at a Glance........................................................................................................................................ 11
2.2 H9080FD I/O Panel .......................................................................................................................................... 13
2.3 H9080FD Key Pad ............................................................................................................................................ 14
2.4 H9080FD Remote Control ................................................................................................................................ 15
Installation ..........................................................................................................16
3.1 Remote Control ................................................................................................................................................. 16
Notes on Batteries ...............................................................................................................................................................16
Notes on Remote Control Operation................................................................................................................................... 17
3.2 Installation Considerations................................................................................................................................ 18
Installation Type.................................................................................................................................................................. 18
Ambient Light ...................................................................................................................................................................... 18
Throw Distance ................................................................................................................................................................... 19
Vertical and Horizontal Position ........................................................................................................................................20
Folded Optics ...................................................................................................................................................................... 21
Other Considerations .......................................................................................................................................................... 21
Lens Shift.............................................................................................................................................................................22

3
Table of ConTenTs
3.3 Mounting the H9080FD .................................................................................................................................... 24
Floor Mounting (Upright)................................................................................................................................................... 24
Ceiling Mounting (Inverted)................................................................................................................................................24
Adjusting the Projection Angle ........................................................................................................................................... 24
3.4 Connections to the H9080FD............................................................................................................................ 25
Connecting Source Components to the H9080FD ..............................................................................................................25
RS-232 Controller Connection............................................................................................................................................ 29
Connecting an External IR Receiver................................................................................................................................... 30
Connecting to AC Power..................................................................................................................................................... 30
3.5 Turning on the Power........................................................................................................................................ 31
3.6 Changing the OSD Language............................................................................................................................ 31
3.7 Adjusting the Picture Orientation...................................................................................................................... 31
Rear Projection ................................................................................................................................................................... 31
Ceiling Mode.......................................................................................................................................................................31
3.8 Lens Adjustments.............................................................................................................................................. 32
Focus ...................................................................................................................................................................................32
Zoom ...................................................................................................................................................................................32
Lens Shift.............................................................................................................................................................................33
Operation ............................................................................................................34
4.1 Selecting an Aspect Ratio ................................................................................................................................. 34
4.2 Selecting An Input Source ................................................................................................................................ 34
4.3 Using the On-Screen Menus ............................................................................................................................. 34
GENERAL ...........................................................................................................................................................................36
IMAGE ................................................................................................................................................................................40
ADVANCED........................................................................................................................................................................48
SETUP................................................................................................................................................................................. 52
INFO ...................................................................................................................................................................................54
Maintenance and Troubleshooting.....................................................................55
5.1 Cleaning the Intake and Exhaust Vents ............................................................................................................ 55
Cleaning the Air Vents ........................................................................................................................................................55
5.2 Troubleshooting Tips ........................................................................................................................................ 56
Serial Interface Specifications...........................................................................57
6.1 Transfer Specifications...................................................................................................................................... 57
6.2 RS-232 Commands ........................................................................................................................................... 58
Specifications .....................................................................................................65
7.1 H9080FD Specifications ................................................................................................................................... 65
7.2 H9080FD Dimensions....................................................................................................................................... 67
7.3 Supported Timings............................................................................................................................................ 68
7.4 Projection Distance and Screen Size................................................................................................................. 70

4
Copyright
This publication, including all photographs, illustrations and software, is protected under international copyright laws,
with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without writ-
ten consent of the manufacturer.
The Vivitek logo is a trademark of “Vivitek Corporation.”
© Copyright 2009
Disclaimer
The information in this document is subject to change without notice. The manufacturer makes no representations or
warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or
fitness for any particular purpose. The manufacturer reserves the right to revise this publication and to make changes
from time to time in the content here without obligation of the manufacturer to notify any person of such revision or
changes.
About this manual
This manual is intended for end users and describes how to install and operate the DLP projector. Wherever possible,
relevant information such as an illustration and its description has been kept on one page. This printer-friendly format
is both for your convenience and to help save paper, thereby protecting the environment. It is suggested that you only
print sections that are relevant to your needs.
CopyrighT informaTion

5
Thank you for your purchase of this quality product! For best performance, please read this manual carefully as it is
your guide through the menus and operation.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the
third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician
for the replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the
point where they exit from the apparatus.
Only use the attachments/accessories specified by the manufacturer.
Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus to avoid injury from
tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the ap-
paratus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
The +12V trigger only outputs 12Vdc signal for triggering. Do not connect to any other power input or output.
This could cause damage to this unit.
Keep the packing material in case the equipment should ever need to be shipped.
This is a Class II LED Product. Never look into the lens when the projector is on.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
imporTanT safeTy
insTruCTions

6imporTanT safeTy insTruCTions
FCC PART 15:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or tele-
vision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
INDUSTRY CANADA (ICES-003):
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC EQUIPMENT
(Applicable throughout the European Union and other European countries with separate collection programs)
This symbol found on your product or on its packaging, indicates that this product should not be
treated as household waste when you wish to dispose of it. Instead, it should be handed over to
an applicable collection point for the recycling of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help prevent potential negative consequences to the
environment and human health, which could otherwise be caused by inappropriate disposal of this
product. The recycling of materials will help to conserve natural resources. This symbol is only
valid in the European Union. If you wish to discard this product, please contact your local authori-
ties or dealer and ask for the correct method of disposal.
•
•
•
•

7
inTroduCTion 1
1.1 About This Manual
This User’s Manual describes how to install, set up and operate the H9080FD.
Throughout this manual, the Projector is referred to as the “H9080FD.”
Target Audience
Vivitek has prepared this manual to help installers and end users get the most out of the H9080FD.
Vivitek has made every effort to ensure that this manual is accurate as of the date it was printed. However, because of
ongoing product improvements and customer feedback, it may require updating from time to time. You can always find
the latest version of this and other Vivitek product manuals on-line, at www.vivitekcorp.com.
Textual and Graphic Conventions
Text Conventions: The following conventions are used in this manual, in order to clarify the information and instruc-
tions provided:
Remote and built-in keypad button identifiers are set in upper-case bold type; for example, “Press ENTER to return
to the previous menu.”
<Enter> indicates that you may press the ENTER key on your key pad.
In addition to these conventions, underlining, boldface and/or italics are occasionally used to highlight important infor-
mation.
•
•

8
Graphic Conventions: These symbols appear in numerous places throughout the manual, to emphasize points that
you must keep in mind to avoid problems with your equipment or injury:
Tip
TIPS highlight time-saving short cuts and helpful guidelines for using certain features.
Note

supplemental information.
Caution
CAUTIONS alert users that a given action or omitted action can degrade performance or cause a
malfunction.
WARNING
WARNINGS appear when a given action or omitted action can result in damage to the equipment,

D
ANGER!

1.2 Using This Manual
Use the following table to locate the specific information you need in this manual.
If you need... ... Turn to page:
General information about the H9080FD 1080p DLP
Projector 9
Installation instructions 16
OSD Operation 35
Troubleshooting tips 56
Specifications for the H9080FD 1080p DLP Projector 65
inTroduCTion

9
inTroduCTion
1.3 Description, Features and Benefits
The Vivitek H9080FD provides state-of-the-art technology for 1080P picture performance, Full HD (1920 x 1080) native
resolution for crystal clear, pristine images. The H9080FD offers incredibly high definition images at today’s highest avail-
able resolutions.
Equipped with precision optics, the H9080FD includes zoom, focus and lens shift controls for a throw range of 1.85:1 to
2.40:1. For a smaller throw distance (1.56:1 to 1.86:1), the H9080FD can be fitted with a varying optics package (optional)
to meet different requirements.
Exceptional scaling and film-to-video (3:2 pull-down) conversion is easily achieved. Combined with Vivitek’s sophisticated
parameters for white balancing, the H9080FD’s proprietary de-interlacing technology provides the highest level of devel-
opment for gray-scale and color balancing and artifact-free images.
Completing this engineering marvel are discrete infrared (IR) and RS-232 control, power and source selection controls for
seamless, flexible operation.
Key Features and Benefits
The H9080FD offers these key features and benefits:
Native Resolution: 1920 x 1080 (16:9 Native Aspect Ratio)
DLP system using high-performance Digital Micromirror Device (DMD)
Two (2), HDMI 1.3 Inputs with High-bandwidth Digital Content Protection (HDCP)
HDTV Compatible
Wide Color Gamut: H9080FD can provide a 25% wider color gamut than NTSC or 77% wider than REC 709.
Excellent Video Processing on progressive and interlaced video inputs.
Green Product with:
Lead free solder used for soldering including circuit and component electronics.
Lead free glasses and coatings.
Recycled paper used in the user manuals and packing cartons.
Instant Hot Restart requires no cool down period before re-starting the projector.
Energy Saving: High efficiency power switching and less than 1W power consumption in standby mode.
•
•
•
•
•
•
•
•
•
•
•
•

10 inTroduCTion
Additional Features of the H9080FD
Horizontal and vertical lens shift
Parts List
Your H9080FD is shipped with the following items. If any items are missing or damaged, please contact your dealer or
Vivitek Customer Service.
H9080FD DLP Projector
Remote Control Unit and two (2) AA-size batteries
AC Power Cords
HDMI Cable
Allen Wrench (for lens shift adjustment)
Component Cable
Lens Cap
User manual (English Hard Copy)
CD
Warranty Card
Inspection Card (China Only)
Quick Guide
•
•
•
•
•
•
•
•
•
•
•
•
•

11
ConTrols and funCTions 2
2.1 H9080FD at a Glance
Figure 2-1 and Figure 2-2 show the key H9080FD components.
Zoom Ring
Focus Ring Projection Lens
Horizontal Lens Shift
Vertical Lens Shift
Exhaust VentIntake Vent
Figure 2-1: H9080FD Front/Side View
EXHAUST VENT
Warm air exits the projector through this vent. Ensure that it is not blocked.
INTAKE VENT
Internal fans draw cool air into the projector through this vent.
ZOOM RING
Rotate this to change the projected image size.
FOCUS RING
Rotate this to focus the projected image.
PROJECTION LENS
Standard throw range (1.85 to 2.40:1)
Short throw range (1.56 to 1.86:1) (Optional)
•
•
•
•
•
•
•

12 ConTrols and funCTions
Figure 2-2: H9080FD Top/ Rear/ Bottom View
KEY PAD
Initiate On Screen Display (OSD) menu and access control buttons for projector adjustment.
I/O PANEL
Connect input and output devices to these ports.
ADJUSTABLE FEET
Use these when the projector is installed in a table-top configuration to level the image and/or adjust the projection
angle.
CEILING MOUNT HOLES
Use these to attach the ceiling bracket to the projector.
1.
2.
3.
4.

13
ConTrols and funCTions
2.2 H9080FD I/O Panel
Figure 2-3 shows the H9080FD I/O panel.
1
2
11 910 8 5 67
4
3
Figure 2-3: H9080FD I/O Panel
HDMI 1 (Digital)
HDMI 2 (Digital)
HDCP-compliant digital video inputs for connecting an HDMI or DVI source.
POWER INPUT (100 to 240 VAC)
Connect the H9080FD to power here.
RGB
Provides a standard, 15-pin VGA-style connection to either an RGB or component high-definition source, or to a
personal computer. The H9080FD automatically detects the input signal resolution.
COMPONENT 2
Three BNCs for connecting component (YPbPr) video sources.
COMPONENT 1/SCART (RCA connectors)
Standard- or high-definition (480i/480p/576i/576p/720p/1080i/1080p) Component (YPbPr) input for connecting a
DVD/HD-DVD/BD player, HD set-top box or other SD/HD source. Also provides RGB input for RGBS sources.
VIDEO
Standard composite video input for connecting a VCR, laser disc player or other composite video source. Also pro-
vides composite sync input for RGBS sources.
S-VIDEO
A standard S-Video input for connecting a DVD player, satellite receiver or Super VHS (S-VHS) VCR.
IR INPUT
Wired input from a Niles- or Xantech-compatible, infrared (IR) repeater system.
TRIGGER 2 (3.5-mm, mini phono jack)
Provides 12 (+/- 1.5) volt switched output for screen relays with 250mA current capacity and short protection.
TRIGGER 1
Provides 12 (+/- 1.5) volt switched output for screen relays with 250mA current capacity and short protection.
RS-232
A female, 9-pin D-sub connector for interfacing with a PC or home theater automation/control system.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.

14 ConTrols and funCTions
2.3 H9080FD Key Pad
Figure 2-4 shows the H9080FD key pad, and the paragraphs that follow describe its functionality.
ENTER
MENU
SOURCE
1
2
3
4
Figure 2-4: H9080FD Key Pad
Cursor Keys ( , , , ):
Use these buttons to select items or settings, adjust
settings or switch display patterns.
ENTER: Press to select a highlighted menu item or
confirm a changed setting.
MENU:
Press this button to show or hide the OSD menu.
SOURCE:
Press to select a video source.
HDMI1, HDMI2, RGB, COMP1, COMP2, VIDEO or
S-VIDEO.
Power:
Use the button to turn on/off the projector.
1.
2.
3.
4.

15
ConTrols and funCTions
2.4 H9080FD Remote Control
Figure 2-5 shows the H9080FD remote control, and the paragraphs that follow describe its functionality.
8
9
10
11
12
13
14
15
Figure 2-5: H9080FD Remote Control
ON: Use this button to turn the projector on.
OFF: Use this button to turn the projector off.
Source Selection Buttons:
Press to select a video source.
HDMI1, HDMI2, RGB, COMP1, COMP2, VIDEO or
S-VIDEO.
Cursor Keys ( , , , ):
Use these buttons to select items or settings, adjust
settings or switch display patterns.
ENTER: Press to select a highlighted menu item or
confirm a changed setting.
Aspect Ratio Selection Button: Press this button re-
peatedly to select one of the following aspect ratios:
• 16 : 9: For viewing 16:9 DVDs or HDTV programs in
their native aspect ratio.
• Letterbox: For viewing LaserDisc movies or non-an-
amorphic DVDs on a 16:9 screen.
• 4 : 3: Scales the input signal to fit 4:3 sources in the
center of the screen.
• 4:3 Narrow: Scales the input signal to fit 4:3
sources in the center of the screen when using an
anamorphic lens.
• Native: Displays source image in its native resolu-
tion without re-sizing or overscan.
TEMP: Press this button to adjust the color temperature.
OS: Press this button to switch to the next Overscan mode.
NR: Press this button to show or hide the Noise
Reduction slider.
MP: Press this button to select where the OSD men-
us display on the screen.
SWAP: Press this button to swap the PIP image with
active source image.
PIP: Press this button to switch to the next PIP image.
GAMMA: Press this button to switch to the next
Gamma setting.
CONT, BRIGHT, SHARP:
Press these buttons to show or hide the Contrast,
Brightness, and Sharpness sliders.
USER 1, USER 2: Press these buttons to recall pre-
set User display settings 1 and 2.
MENU: Press this button to show or hide the OSD
menu.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.

16
3.1 Remote Control
To install batteries in the remote control:
Slide the battery compartment cover in the direction of the arrow to remove it.
Install two AA batteries with the correct polarity.
Replace the cover.
1. 2. 3.
Notes on Batteries
Make sure that the battery polarities are correct when installing the batteries.
Do not mix an old battery with a new one or different types of batteries.
If you will not use the remote control for a long time, remove the batteries to avoid damage from battery leakage.
1.
2.
3.
•
•
•
3insTallaTion

17
insTallaTion
Notes on Remote Control Operation
In most situations, you can simply point the remote control at the screen which will reflect the IR signal from the re-
mote back toward the IR receiver on the projector. In some cases, however, ambient conditions may prevent this. If
so, point the remote control at the projector and try again.
If the effective range of the remote control decreases, or it stops working, replace the batteries with new ones.
The remote control may fail to operate if the infrared remote sensor is exposed to bright sunlight or fluorescent lighting.
60
60
Figure 3-1: IR Reception Angles
•
•
•

18
3.2 Installation Considerations
Proper installation of your projector will ensure the quality of your display. Whether you are installing a projector tempo-
rarily or permanently, you should take the following into account to ensure your projector performs optimally.
Installation Type
Choose the installation type that best suits your needs: front or rear screen, floor mount or inverted mount. Table 3-1
compares these various installation methods.
Advantages Considerations
Front Screen, Floor Mount Installation
Easy to set up
Can be moved or changed quickly
Easy to access
•
•
•
Shares floor space with audience•
Front Screen, Inverted Mount (ceiling) Installation
Does not take up audience space
Projector is unobtrusive
Projector cannot be accidentally moved
•
•
•
Installation is more permanent
Projector access is more difficult
•
•
Rear Screen, Floor Mount Installation
Projector is completely hidden
Projector is easily accessed
Usually good ambient light rejection
•
•
•
Requires separate room
Installation cost is usually higher
•
•
Rear Screen, Inverted Mount (ceiling) Installation
Projector is completely hidden
Usually good ambient light rejection
•
•
Requires separate room
Installation cost is usually higher
•
•
Rear Screen, Floor Mount with Mirror
Projector is completely hidden
Usually good ambient light rejection
Requires less space behind screen than other rear
screen installations
•
•
•
Requires separate room
Installation cost is usually higher
•
•
Table 3-1: Projector Installation Options
Ambient Light
In general, minimize or eliminate light sources directed at the screen. Contrast ratio in your images will be noticeably
reduced if light directly strikes the screen, such as when a shaft of light from a window or floodlight falls on the image.
Images may then appear washed out and less vibrant.
insTallaTion

19
insTallaTion
Throw Distance
Throw distance is the distance measured from the front of the projector to the screen. This is an important calculation
in any projector installation as it determines whether or not you have enough room to install your projector with a de-
sired screen size and if your image will be the right size for your screen.
You can quickly estimate the throw distance by taking the width of the screen and multiplying it by the lens throw ratio;
see Figure 3-2. The result of this calculation tells you roughly how far back the projector should be positioned from the
screen in order to project a focused image large enough to fill the screen.
Estimated Throw Distance
Throw Distance (TD) = Screen Width (w) x Lens Throw Ratio
Screen width (W)
TD
Figure 3-2: Estimated Throw Distance
Two models of the H9080FD are available, one with 1.56-1.86:1 lens (PA03500-002) and the other with 1.85-2.40:1
lens (PA03500-001). With optional zoom adaptors throw ratios of 1.24 – 3.0 can be achieved.
The standard H9080FD offers throw ratios between 1.85:1 and 2.40:1.
With the optional, short-throw lens, the H9080FD offers throw ratios between 1.56:1 and 1.86:1.

20
Vertical and Horizontal Position
Proper placement of the projector relative to the screen will yield a rectangular, perfectly-centered image that com-
pletely fills the screen.
Ideally, the projector should be positioned perpendicular to the screen.
The lens center should be aligned with either the top or bottom edge of the screen areas. The lens should be centered
in the middle of the screen. See Figure 3-3.
Screen
Height Projection Distance
Ceiling
x
Lens CenterLens Center
Ceiling Installation
Screen
Height
Floor
Lens Center
Projection Distance
Floor Installation
Lens Center
x
Figure 3-3: Projector Placement
Note

For ceiling installations, use approved mounting hardware and M4 screws with a maximum screw
depth of 8 mm (0.31inch).
The construction of the ceiling mount must be of suitable shape and strength. The ceiling mount

be capable of withstanding three times the weight of the equipment (not less than 48 kg) over a
period of 60 seconds.
insTallaTion