Vivo CART-V02D User manual

Mobile Stand Up Workstation
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/cart-v02d
[email protected]om www.vivo-us.com 1-800-371-5654
SKU: CART-V02D

2 3
PACKAGE CONTENTS
WARNING!
A1 (x12)
M6x12
A2 (x4)
M6x25
A3 (x4)
M6x40
A4 (x6)
M6x35
A5 (x4)
M6x50
A6 (x1)
Allen Key
A7 (x1)
Wrench
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF CART.
• USE TIPOVER RESTRAINT OR ANCHOR CART TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
ASSEMBLY STEPS
STEP 1
Slip covers (G1) over legs (B1, B2).
STEP 2
Place leg (B2) on a at surface and attach the previous assembled leg and arms using bolts (A1) and
Allen key (A6). NOTE: Do not fully tighten screws.
G1 (x2)
Cover
G2 (x4)
Cover
G3 (x2)
Caster
STEP 3
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Lay leg (B1) down on a at surface and attach center arms (B3, B4) using bolts (A1) and Allen key (A6).
NOTE: Do not fully tighten screws.
G4 (x2)
Caster
G5 (x2)
Knob
B1 (x1)
Leg
B2 (x1)
Leg
B3 (x2)
Arm
B4 (x1)
Arm
B5 (x1)
Shelf
B6 (x2)
Shelf Bracket
B7 (x1)
Shelf
B8 (x1)
Shelf
B9 (x1)
Shelf
B1 B2
B4
B3x2
B7
B6x2
B8
B5
B9
B1
G1x2
B2
B1
B4
B3x2
A6
A1x2
A1x4
B2
A1x2 A1x4
33 lbs
(15 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Per Shelf

4 5
STEP 4
Tighten bolts (A1) using Allen key (A6). “L” dimensions should be equal.
STEP 5
Attach shelf (B5) to braces (B3) using bolts (A2).
STEP 6
Add covers (G2) to arms (B3).
STEP 7
Add wheels (G4, G3) using wrench (A7).
STEP 8
Secure the shelf (B7) to shelf brackets (B6)
using bolts (A4) and Allen key (A6).
STEP 9
Attach the shelf brackets (B6) to the top of legs
using bolts (A3) and Allen key (A6).
LL
G2x4
A2x4
B5
A3x4
B6x2
B7
A4x4
G4x2 A7
G3x2

6 7
STEP 10
Attach the shelf (B8) to the legs using bolts (A5).
STEP 11
Tighten bolts (A1) on center brace (B4) using the
Allen key (A6).
STEP 12
Adjust the worktable to verify smooth operation. Raise to the
maximum height and slowly lower it to the lowest position.
STEP 13
Attach the shelf (B9) to the center brace (B4) using bolts (A4) and Allen key (A6).
STEP 14
Adjust the worktable to the desired height, then
tighten the knobs (G5) to secure.
STEP 15
Turn the bottom nut counter-clockwise to loosen. Turn the top nut clockwise to tighten. NOTE: Make
sure all casters are at the same height. If the casters are not at the same height, they can be adjusted as
shown in the images.
B8 A5x4
B9
A4x2

Last Updated: 11/12/2018
If any parts are received damaged or defective, please contact us. We are happy to
replace parts to ensure you have a fully functioning product.
For more VIVO products, check out our website at:
www.vivo-us.com.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]om www.vivo-us.com 1-800-371-5654