Vivo STAND-V104C User manual

Quad Monitor Desk Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v104c
SKU: STAND-V104C
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2 3
ASSEMBLY STEPS
PACKAGE CONTENTS
TOOLS NEEDED
WARNING!
Phillips
Screwdriver
A(x1)
Arm
B(x4)
VESA Plate
D(x1)
Clamp
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
E(x1)
Pole
F (x1)
Pole
I (x2)
Cable Clip
N (x4)
Thumbscrew
L (x3)
M6x12
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
M-B (x16)
M4x16
M-C (x16)
M5x12
O (x1)
3mm Allen
Wrench
P(x1)
4mm Allen
Wrench
STEP 1
M-D (x2)
M5x16
Attach the pole cap (G) to the top of the upper pole (F).
M-E (x16)
D5 Washer
M-F (x16)
Spacer
Q(x1)
5mm Allen
Wrench
R (x1)
6mm Allen
Wrench
M-A (x16)
M4x12
C (x1)
Bracket
H (x1)
Pole
Connector
G (x1)
Pole Cap
Drill
15.4lbs
(7kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
PER ARM
STEP 2
OPTION A: Clamp Installation
Mount the lower pole (E) to the clamp (D)
using M6x12 bolts (K) with the 4mm Allen
wrench (P). Apply pads (K) evenly to the bot-
tom of the base, and clamp to the desktop.
M (x1)
Support Plate
J (x1)
Grommet
Base
K (x5)
Pad
OPTION B: Grommet Base Installation
Remove screw from clamp bolt, then
remove the clamp bolt from the clamp
(C). Apply pads (K) evenly to the bottom
of the grommet base (J). Align pin on top
of the grommet base with the small hole
on the bottom of lower pole (E), position
over a hole in the desktop (drill hole
using a 10mm or 3/8” bit if needed), and
secure to the desktop using the clamp
bolt and support plate (M).

4 5
STEP 3
Install the arm (A) and one cable clip (I) to
the lower pole (E). Fasten the bolt with the
5mm Allen wrench (Q).
OPTION A: Flat Back Monitor
Install the VESA plates (B) to the monitors using bolts (M-A or M-C) and washers (M-E).
STEP 4
Screw the pole connector (H) down onto the lower pole (E), then screw the upper pole (F) into the
pole connector (Note: pole connector set screws may need to be loosened first). Tighten the set
screws in the pole connector using the 3mm Allen wrench (O). Install the bracket (C) and second
cable clip (I) to the upper pole (F). Fasten the bolt with the 6mm Allen wrench (R).
OPTION B: Curved/Recessed Back Monitor
Install the VESA plates (B) to monitors using bolts (M-B or M-D), washers (M-E) and spacers
(M-F).
STEP 5

6 7
STEP 7
Tighten or loosen the tilt joints using the 6mm Allen wrench (R).
STEP 8
Manage cables using the installed cable clips (I).
STEP 9
Store the Allen wrenches in the cable clips
(I) for future use.
STEP 10
Adjust monitor alignment using 5mm Allen wrench (Q).
STEP 6
Slide the VESA plates (B) with monitors onto the heads of the arms (B) and bracket (C).
Install the thumb screws (N) to secure the monitors.

LAST UPDATED: 03/20/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303