
2 3
STEP 2 (Continued)
PACKAGE CONTENTS
TOOLS NEEDED
17.6lbs
(7.98kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
A (x4)
Bracket Arm
B(x4)
“L” Support
Holder
C(x4)
Plastic Cover
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
D(x8)
Nut
E(x8)
Carriage Bolt
F (x4)
M6x40
G(x4)
M6x60
H (x4)
M6x80
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
ASSEMBLY STEPS
STEP 1 STEP 3
With all holders facing up, place monitor on lower two holders and tighten lower two screws. Turn top
holders down and tighten top screws, then tighten nuts for the upper arms. Install covers (C) to holders.
Attach holders (B) to arms (A) using M6 monitor
screws (F, G, or H) depending on monitor
thickness. Do not tighten.
OPTION A
OPTION B
I (x1)
Wrench
Install arms to your VESA mount in one of the
four patterns shown (depending on the size and
shape of your monitor) using carriage bolts (E)
and nuts (D). Tighten nuts using wrench (I) for
lower two arms (A) only at this time.
OPTION C
C
A
B
F/G/ H
A
X
OPTION D
√
X
X
ED
I
75mm/100mm
75mm/100mm
STEP 2