Vivo STAND-VAD2 User manual

VES dapte Backet
Monito Mount Kit
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Model STN V2
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
ssembl Steps
Tools Requied
phillips screwdriver
ackage Contents
1
Step 1
a (x1)
Plate
b (x1)
VES Bracket
c (x8)
M4x12
d (x4)
M4x30
e (x4)
M4 Spacer
f (x4)
Washer
g (x4)
Nut
- -https//vivo us.com/poducts/stand vad2
Option  Flat Back Monito Option B Cuved Back Monito
Install the VESA Bracket (b) to
the Monitor/TV using screws (c).
Install the VESA Bracket (b) to
the Monitor/TV using screws (d)
and spacers (e).
b
b

2
Step 2
Step 4
Step 3
Slide VESA
Bracket (b)
down onto
Plate (a) until
you hear a
click.
To detach VESA Bracket (b), hold the lever on the Plate (a) down to
release the latch and lift the VESA bracket off.
Connect the Plate (a)
and VESA Bracket (b) of
Monitor/TV Mount
using screws (c),
washers (f), and nuts
(g).
a
a
b
a
Monitor Arm Not Included
If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Safet Waning
Contact us at
Last updated: 06/11/18