
1
SAFETY INFORMATION
Please read the following information carefully before installing and using. Failure to
observe these safety instructions may result in serious injury and will release VIVOSUN
of all liability and void all product warranties.
The input voltage of this fan is 110Vac-120Vac/60Hz. DO NOT use the fan under higher input
voltages.
DO NOT use in the environment of high concentrations of particles such as active carbon,
ferrous powders, etc. The environment temperature shall not exceed 45°C.
DO NOT block the fan by force or change the angle when it is oscillating.
DO NOT unplug the power cord directly when it is operating.
Fix the fan securely on an appropriate position on a pole or post before it turned on.
Check the fan regularly. Adjust or remove any obstructions affecting the fan when oscillating.
Direct spraying or cleaning by water or other liquid is forbidden. This may cause short circuit
or electric shock. DO NOT use chemicals like gasoline, benzene and diluent to clean the fan.
Avoiding air reflux via open air flue or other fired equipment.
DO NOT put fingers or other things into fans. Keep the product away from children.
DO NOT let water into motor or electric parts.
DO NOT cut off or reconnect the power cord. If the power cord is damaged, please contact
us. Any unauthorized modifications or disassembly will void the warranty immediately.
DO NOT use the product if it is damaged when received, please contact us for replacement.
-
-
-
-
-
-
-
-
-
-
-
-