Vizio VMB070 User manual
VMB070 – USER GUIDE
Congratulations on your new VIZIO VMB070 7" LED LCD Portable TV.
To get the most out of your new VIZIO product, read these instructions before using your product
and retain them for future reference.
For assistance, call 1-877-MYVIZIO (1-877-849-4623), or contact us at
www.VIZIO.com/support.
To purchase or inquire about accessories and installation services for your VIZIO product, visit our
website at www.VIZIO.com or call toll free at 1-888-849-4623.
We recommend you register your VIZIO product at:
• www.VIZIO.com
or
• Complete the enclosed registration card and mail it to:
VIZIO
39 Tesla
Irvine, CA 92618
For peace of mind and to protect your investment beyond the standard warranty, VIZIO offers
on-site extended warranty service plans. These plans provide additional coverage during the
standard warranty period. To purchase an extended warranty service plan, visit www.VIZIO.com.
ThanksagainforchoosingVIZIO.WearecondentyouwillenjoyyournewVIZIOTV.
Welcome!
Model Number: VMB070 7” LED LCD Portable TV
Serial Number:
Date of Purchase:
My Product Information
Enter your product information here for easy reference:
When you see this symbol, please read the accompanying important warning.
When you see this symbol, please read the accompanying helpful tip.
Your DTV is designed and manufactured to operate within dened design limits. Misuse
mayresultinelectricshockorre.TopreventyourDTVfrombeingdamaged,thefollowing
instructions should be observed for the installation, use, and maintenance of your DTV. Read
the following safety instructions before operating your DTV. Keep these instructions in a safe
place for future reference.
•Toreducetheriskofelectricshockorcomponentdamage,switchoffthepowerbefore
connecting other components to your DTV.
•UnplugtheAC/DCpoweradapterbeforecleaningyourDTV.Adampclothissufcientfor
cleaning your DTV. Do not use a liquid or a spray cleaner for cleaning your DTV. Do not
use abrasive cleaners.
•Alwaysusetheaccessoriesrecommendedbythemanufacturertoinsurecompatibility.
•WhenmovingyourDTVfromanareaoflowtemperaturetoanareaofhightemperature,
condensation may form in the housing. Wait before turning on your DTV to avoid causing
re,electricshock,orcomponentdamage.
•AdistanceofatleastthreefeetshouldbemaintainedbetweenyourDTVandanyheat
source,suchasaradiator,heater,oven,amplieretc.DonotinstallyourDTVcloseto
smoke.OperatingyourDTVclosetosmokeormoisturemaycausereorelectricshock.
•Slotsandopeningsinthebackandbottomofthecabinetareprovidedforventilation.To
ensure reliable operation of your DTV and to protect it from overheating, be sure these
openings are not blocked or covered. Do not place your DTV in a bookcase or cabinet
unless proper ventilation is provided.
•NeverpushanyobjectintotheslotsandopeningsonyourDTVcabinet.Donotplace
anyobjectsonthetopofyourDTV.Doingsocouldshortcircuitpartscausingareor
electric shock. Never spill liquids on your DTV.
•YourDTVshouldbeoperatedonlyfromthetypeofpowersourceindicatedonthelabel.
If you are not sure of the type of power supplied to your home, consult your dealer or
local power company.
•DonotapplypressureorthrowobjectsatyourDTV.Thismaycompromisetheintegrity
of the display. The manufacturer’s warranty does not cover user abuse or improper
installations.
•Thepowercordmustbereplacedwhenusingdifferentvoltagethanthevoltage
specied.Formoreinformation,contactyourdealer.
•Whenconnectedtoapoweroutlet,powerisalwaysowingintoyourDTV.Tototally
disconnect power, unplug the power cord.
•Donotoverloadpowerstripsandextensioncords.Overloadingcanresultinreor
electric shock.
•ThewallsocketshouldbeinstallednearyourDTVandeasilyaccessible.
•OnlypowerofthemarkedvoltagecanbeusedforyourDTV.Anyothervoltagethanthe
speciedvoltagemaycausereorelectricshock.
•Donottouchthepowercordduringlightning.Toavoidelectricshock,avoidhandlingthe
power cord during electrical storms.
•UnplugyourDTVduringalightningstormorwhenitwillnotbeusedforlongperiodof
time. This will protect your DTV from damage due to power surges.
Important Safety Instructions
•DonotattempttorepairorserviceyourDTVyourself.Openingorremovingthebackcovermay
expose you to high voltages, electric shock, and other hazards. If repair is required, contact your
dealerandreferallservicingtoqualiedservicepersonnel.
•KeepyourDTVawayfrommoisture.DonotexposeyourDTVtorainormoisture.Ifwater
penetrates into your DTV, unplug the power cord and contact your dealer. Continuous use in this
casemayresultinreorelectricshock.
•DonotuseyourDTVifanyabnormalityoccurs.Ifanysmokeorodorbecomesapparent,unplug
the power cord and contact your dealer immediately. Do not try to repair your DTV yourself.
•Avoidusingdroppedordamagedappliances.IfyourDTVisdroppedandthehousingis
damaged,theinternalcomponentsmayfunctionabnormally.Unplugthepowercordimmediately
andcontactyourdealerforrepair.ContinueduseofyourDTVmaycausereorelectricshock.
•DonotinstallyourDTVinanareawithheavydustorhighhumidity.OperatingyourDTVin
environmentswithheavydustorhighhumiditymaycausereorelectricshock.
•Toavoidinjury,usecarewhileantennaisextended.
•WhenunpluggingyourDTV,holdtheAC/DCpoweradapter,notthecord.Pullingonthepower
cordmaydamagethewiresinsidethecordandcausereorelectricshock.WhenyourDTVwill
not be used for an extended period of time, unplug the power cord.
•Toreduceriskofelectricshock,donottouchtheconnectorwithwethands.
•Insertbatteriesinaccordancewithinstructions.Incorrectpolaritiesmaycausethebatteriesto
leakwhichcandamagetheremotecontrolorinjuretheoperator.
•Ifanyofthefollowingoccurs,contactthedealer:
- The power cord fails or frays.
-LiquidspraysoranyobjectdropsintoyourDTV.
- Your DTV is exposed to rain or other moisture.
- Your DTV is dropped or damaged in any way.
- The performance of your DTV changes substantially.
If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that
the antenna or cable system is electrically grounded to provide some protection against voltage
surges and static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard
to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of the grounding conductors, location of antenna discharge unit,
connection to grounding electrodes, and requirements of the grounding electrode.
Lightning Protection
For added protection of the TV during a lightning storm or when it is left unattended or unused
for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable
system.
Television Antenna Connection Protection
The nationwide switch to digital television broadcasting will be complete on June 12, 2009,
but your local television stations may switch sooner. After the switch, analog-only television
sets that receive TV programming through an antenna will need a converter box to continue
toreceiveover-the-airTV.Watchyourlocalstationstondoutwhentheywillturnofftheir
analog signal and switch to digital-only broadcasting. Analog-only TVs should continue to
work as before to receive low power, Class A or translator television stations and with cable
and satellite TV services, gaming consoles, VCRs, DVD players, and similar products.
For additional information, please contact the parties listed below, as appropriate:
FCC (US Federal Communications Commission)
Web: www.fcc.gov
Phone: 1-888-CALL-FCC (1-888-225-5322)
TTY: 1-888-TELL-FCC (1-888-835-5322)
Fax: 1-866-418-0232
E-mail: [email protected]
NTIA (National Telecommunications and Information Administration)
Web: www.ntia.doc.gov
Phone: 1-888-DTV-2009 (1-888-388-2009)
ListofUSTelevisionStations:www.high-techproductions.com/usTVstations.htm
Note: Your TV comes with a built-in tuner capable of processing digital broadcasts. No extra
converter box is needed.
DTV Transition Advisory
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall into
such power lines or circuits. Remember, the screen of the coaxial cable is intended to be
connected to earth in the building installation.
Your VIZIO product has been carefully packed in a cardboard carton designed to protect
it from damage. When you have opened the package, check that all of the contents are
included and are in good condition.
Package Contents
The TV will not receive free-to-air television programs while in motion. Do not use this device
while operating a moving vehicle.
Package Contents
Remote Control 7” LED LCD Portable TV Carrying Pouch
Composite AV Cable Power Adapter RF Adapter
Save the carton and packing material. It may be useful if your device needs to be shipped for
warranty service.
The TV screen can be easily scratched or broken, so handle your TV gently. Never place the TV on
a surface screen-down.
• Remote Control
• 7” LED LCD Portable TV
• Carrying Pouch
• Quick Start Guide (not pictured)
• Composite AV Cable
• Power Adapter
• RF Adapter
• Registration Card (not pictured)
Controls & Connections
1
1
Chapter 1: Controls and Connections
Right Side Detail
RF Adapter Port
USB Port
Composite AV Port
On/Off Switch
RF Adapter Port Connect RF devices (use only the RF Adapter).
USB Port ConnectUSBstoragedevicesforphotosharing.
Composite AV Port Connect composite devices (use only the Composite AV Cable).
On/Off Switch Move switch to ON when using the DTV in battery mode.
Move switch to OFF when storing the DTV or using with the Power Adapter.
Before setting up your TV, take a few moments to familiarize yourself with the various controls
and connections. This will make the setup much faster and your experience with the TV much
moreenjoyable!
Controls & Connections
1
2
Left Side Detail
Headphone Port
Power Adapter Port
Headphone Port Connect headphones, earbuds, or external speakers.
Power Adapter Port Connect the Power Adapter.
Back/Top Detail
Power/Standby
Kickstand
Power/Standby Turn the DTV on or off. If the DTV is being powered by the battery, then
the On/Off Switch (see Right Side Detail) must be in the ON position for
this button to work.
Kickstand ExtendthekickstandandplacetheDTVonaatsurfacetousetheDTV
hands-free.
Controls & Connections
1
3
Touch-Sensitive Controls
Menu
Channel Up/Down
OK
Volume Up/Down
Using the Touch-Sensitive Controls
The touch-sensitive controls are located below the screen. When the DTV is on, the controls light up.
Tousethetouch-sensitivecontrols,placethetipofyourngerononeofthelitcontrolsymbols.
Donotpushonthecontrolsforcefully—makecompletecontactwithyourngerandtheDTVwill
respond.
The touch-sensitive controls will not function properly if you try to use them while wearing gloves.
Controls & Connections
1
4
Using the Remote Control
Your new TV includes a remote that allows you to control the TV from a distance. To use the remote,
point it at the DTV screen and press a button.
• There should be no obstacles between the remote control and the TV screen.
• The effective range of the remote control is approximately 30 feet.
Remote Control Buttons
(See opposite page for button descriptions.)
Info
Menu
Arrow
Guide
Mute
Volume Up/Down
Input
Power/Standby
Back
OK
Exit
Channel Up/Down
Last
Number Pad
Controls & Connections
1
5
Remote Control Buttons
Power/Standby Turn the DTV on or off. If the DTV is being powered by the battery, then
the On/Off Switch (see Right Side Detail) must be in the ON position for
this button to work.
Info Display channel information, time, and battery status.
Arrow UsetheArrowbuttonstonavigatetheon-screenmenuandchannel
guides.
OK Select the highlighted menu option.
Menu Display the on-screen menu. For details, see Chapter5:Usingthe
On-Screen Menu on page 17.
Exit Close the on-screen menu.
Back Go to the previous on-screen menu options.
Guide Display the episode guide (digital channels only). For details, see Using
the Digital Episode Guide on page 52.
Mute Turn the sound off or on. When mute is activated, the TV’s audio is turned
off.
Last Return to the channel last viewed.
Volume Up/Down Increase or decrease the loudness of the TV’s audio.
Channel Up/Down Change the channel. With each press of the button, the channel will
increase or decrease by one.
Number Pad Usethenumberpadtomanuallyenterachannel.
Input Change the input device. With each press of the button, the TV will display
a different input.
Replacing the Battery
1. Remove the battery cover.
2. Insert one Type CR2025 battery into the remote
control. Make sure that you match the (+) and (-)
symbols on the batteries with the (+) and (-) symbols
inside the battery compartment.
3. Replace the battery cover.
• Use only a quality battery.
• Inserting the battery incorrectly may result in cracking or leakage that may cause a fire or
result in injury.
• Dispose of old or dead batteries in accordance with local hazardous waste regulations.
• Keep batteries away from children and pets.
• Theremotecontrolshouldbekeptdryandawayfromheatsources.Avoidhumidity.
• IftheDTVrespondserraticallytotheremotecontrolordoesnotrespondatall,thebattery
mayneedtobereplaced.
• Whenstoringtheremotecontrol,removethebatteries.
• Donottakebatteriesapart,heatthem,orthrowthemintoare.
• Donotstrike,throw,ordroptheremotecontrol.
• Donotattempttocleantheremotecontrolwithavolatilesolvent.Tocleantheremote,
wipeitwithaclean,dampcloth.
First-Time Setup
2
7
Chapter 2: First-Time Setup
BeforeyoustartusingyourTV,youwillneedtocompletetherst-timesetup.
To make this easy, VIZIO has included a Setup Wizard that helps you complete the process. The
SetupWizardautomaticallystartsthersttimeyouturnontheTV.
TopreparetheTVforrst-timesetup:
1. Connect the power adapter to the power port on the
T V.
2. Plug the power adapter into an electrical outlet.
3. ExtendthekickstandandplacetheTVonaat
surface.
First-Time Setup
2
8
4. Remove the plastic tab from the remote.
5. Swing the paddle out.
6. Gently pull the paddle away from the body of the TV.
7. Swing the paddle up.
First-Time Setup
2
9
8. Gently pull the antenna from the paddle until it is fully
extended.
9. PlacetheDTVonaatsurfaceinanopenarea(forthe
best reception).
First-Time Setup
2
10
Completing the First-Time Setup with the Setup Wizard
1. Press the Power/Standby button on the remote. The
TV powers on and the Setup Wizard starts.
2. UsetheUp/Down Arrow buttons to select your
preferred language, then press Right Arrow.
3. UsetheUp/Down Arrow buttons to select your time
zone, then press Right Arrow.
4. UsetheUp/Down Arrow buttons to select Antenna,
then press Right Arrow. The channel scan begins.
First-Time Setup
2
11
5. Wait until the channel scan is 100% complete, then
press Right Arrow.
6. Press EXIT.
Connecting Your Devices to the TV
3
12
Your DTV can be easily connected to an external device:
• DVD or Blu-Ray player
• Video game console
• Cable box
• External antenna
• Or other device
ToconnectanexternaldevicetotheTV,youmustrstverifythattheexternaldevicehasoneof
the following types of ports:
Connecting a Device with an RF Port
To connect a device with an RF port, use the included RF adapter.
1. Connect a coaxial cable to the RF port on your external device.
Chapter 3: Connecting Your Devices to the TV
RF Port Composite Ports
Connecting Your Devices to the TV
3
13
2. Connect the other end of the coaxial cable to the RF port on the RF adapter.
3. Connect the RF adapter to the RF port on the side of the TV.
If you are connecting a device that uses channel information, such as an external antenna or a cable
TV connection (directly from the wall outlet), you may need to perform a channel scan. See Scanning
for Channels on page 23.
Connecting Your Devices to the TV
3
14
Connecting a Device with Composite Ports
To connect a device with composite ports, use the included composite AV cable.
1. Connect the yellow, red, and white compsite connectors on the compsite AV cable to the
corresponding yellow, red, and white compsite ports on your external device.
2. Connect the other end of the composite AV cable to the AV port on the side of the TV.
Other manuals for VMB070
2
Table of contents
Other Vizio Portable TV manuals
