Hermetic Camera AP-143G
AP-143G VIZIT
SAFETY INSTRUCTIONS
PARTS LIST
INSTALLATION
OPERATING INSTRUCTION
–
.
1
1
1.
*
is a dome colour camera for outdoor surveillance intended for use in video doorphones and access
control systems.
In order to protect the camera, avoid placing or using the product under direct sunlight.
Please ensure that the input voltage range is within the specifications
Do not attempt to service the camera by yourself. Please refer all services to qualified service personnel.
Camera pc.
Operating instruction pc.
Fastening kit pc
Choose the camera location with regard to the required field of view. See Fig. 3 for the best camera location and its
field of view.
···
Figure 1 - Hermetic Camera AP-143G
······
Metal case, vandal-proof
Weather-resistant
Wide range of operating temperatures
24 InfraRed LEDs for illumination
Illumination auto ON in dark environment
Colour image auto switch to B/W in dark environment
1.
2.
3.
.
4.
5.
2 -
Remove the mounting base by loosening two locking
screws (5) with the hex-nut wrench supplied.
Choose location* for the camera on a wall or the ceiling,
and attach the mounting base securely with screws
and concrete inserts supplied
Connect the camera to your monitor and power supply
unit. Check if the monitor shows picture from the camera.
To adjust the picture, set the ball camera to the suitable
position by rotating the ball and middle cover.
Fix the ball camera securely by fastening the locking
screws.
Figure Camera Installation
(1)
(6)
(7) .
Attach the locking cover (4), ball camera (2) and middle
cover (3) to the mounting base. Fasten the locking
screws so that with locking and middle covers fixed, the
ball be loose enough to rotate
1
2
3
4
5
6
7
Red
Black
Yellow
Black
