VocoPro RECODE-1 User manual
RECODE-1
Portable Analog to Digital Mp3 Recorder with
Anti-Distort Technology
3
Table of Contents
Safety Instructions
FCC Information
Listening for a Lifetime
Welcome
Features
Features
Connections
Memory
Getting Started
Getting Started
Returns and Warranty
Getting Connected
Connecting a Source to the RECODE-1
RECODE-1 Playback Mode
Recording with the RECODE-1
Utilizing Expandable SD Memory
Connecting the RECODE-1 to a PC or
MAC Computer
Descriptions & Functions
Front Panel
Rear Panel
Bottom Panel
Top Panel
Troubleshooting
4
6
8
9
10
11
12
15
18
22
4
Safety Instructions
CAUTION
RISK OF SHOCK
CAUTION: To reduce the risk of
electric shock, do not remove cover
(or back). No user-serviceable parts
inside. Only refer servicing to quali-
fied service personnel.
Explanation of Graphical Symbols
The lightning flash &
arrowhead symbol, within
an equilateral triangle, is
intended to alert you to
the presence of danger
The exclamation point
within an equiliteral
triangle is intended to
alert you to the presence
of important operating
and servicing instructions.
WARNING
To reduce the risk of fire or electric
shock, do not expose this unit to
rain or moisture.
1. Read Instructions - All the safety
and operating instructions should
be read before the appliance is
operated.
2. Retain Instructions - The safety
and operating instructions should
be retained for future reference.
3. Heed Warnings - All warnings on
the appliance and in the operating
instructions should be adhered
to.
4. Follow Instructions - All operat-
ing and use instructions should
be followed.
5. Attachments - Do not use attach
ments not recommended by the
product manufacturer as they
may cause hazards.
6. Water & Moisture - Do not use
this unit near water. For example,
near a bathtub or in a wet base-
ment and the like.
7. Carts & Stands - The appliance
should be used only with a cart
or stand that is recommended
by the manufacturer.
7 A. - An appliance and cart
combination should be
moved with care. Quick
stops, excessive force,
& uneven surface may cause an
over turn.
8. Ventilation - The appliance should
be situated so its location does
not interfere with its proper
ventilation. For example, the appli-
ance should not be situated on
a bed, sofa, rug, or similar sur-
face that may block the ventilation
slots.
9. Heat - The appliance should be
situated away from heat sources
such as radiators, heat registers,
stoves, or other appliances
(including amplifiers) that produce
heat.
10. Power Sources - The appliance
should be connected to a power
5
Safety cont.
power supply only of the type
described in the operating
instructions or as marked on
the appliance.
11. Grounding or Polarization
- Precautions should be taken
so that the grounding or polar-
ization means of an appliance is
not defeated
12. Power-Cord Protection -
Power-supply cords should be
routed so that they are not likely
to be walked on or pinched by
items place upon or against
them, paying particular atten-
tion to cords at plugs, conve-
nience receptacles, and the
point where they exit from the
appliance.
13. Cleaning - Unplug this unit from
the wall outlet before cleaning.
Do not use liquid cleaners or
aerosol cleaners. Use a damp
cloth for cleaning.
14. Power Liines - An outdoor
antenna should be located away
from power lines.
15. Non-use Periods - The power
cord of the appliance should be
unplugged from the outlet when
left unused for a long period
of time.
16. Object & Liquid Entry - Care
should be taken so that objects
do not fall and liquids are not
spilled into the enclosure
through openings.
17. Damage Requiring Service
- The appliance should be ser-
viced by qualified service person-
nel when:
A. The power supply cord or plug
has been damaged; or
B. Objects have fallen into the
appliance; or
C. The appliance has been exposed
to rain; or
D. The appliance does not appear
to operate normally or exhibits a
marked change in performance;
or
E. The appliance has been
dropped, or the enclosure
damaged.
18. Servicing - The user should not
attempt to service the appliance
beyond that described in the
operating instructions. All other
servicing should be referred to
qualified service personnel.
Note:
To CATV system installer’s (U.S.A.):
This reminder is provided to call the
CATV system installer’s attention to
Article 820-40 of the NEC that pro-
vides guidelines for proper grounding
and, in particular, specifies that the
cable ground shall be connected as
close to the point of cable entry as
practical.
6
FCC Information (U.S.A.)
1. IMPORTANT NOTICE: DO
NOT MODIFY THIS UNIT!: This
product, when installed as indicated
in the instructions contained in this
manual, meets FCC requirements.
Modifications not expressly approved
by Vocopro may void your authority,
granted by the FCC, to use this
product.
2. IMPORTANT: When connecting
this product to accessories and/or
another product use only high quality
shielded cables. Cable(s) supplied
with this product MUST be used.
Follow all installation instructions.
Failure to follow instructions could
void your FCC authorization to use
this product in the U.S.A.
3. NOTE: This product has been
tested and found to comply with the
requirements listed in FCC Regula-
tions, Part 15 for Class “B” digital
devices. Compliance with these
requirements provides a reasonable
level of assurances that your use
of this product in a residential en-
vironment will not result in harmful
interference with other electronic
devices. This equipment gener-
ates/uses radio frequencies and, if
not installed and used according to
the instructions found in the owner’s
manual, may cause interference
harmful to the operation of other
electronic devices. Compliance with
FCC regulations does not guarantee
that interference will not occur in all
installations. If this product is found
to be the source of interference,
which can be determined by turning
the unit “Off” and “On”, please try to
eliminate the problem by using one
of the following measures:
Relocate either this product or the
device that is being affected by the
interference.
Use power outlets that are on differ-
ent branch (circuit breaker or fuse)
circuits or install AC line filter(s).
In the case of radio or TV nterfer-
ence, relocate/reorient the
antenna. If the antenna lead-in is
300-ohm ribbon lead, change the
lead-in to coaxial type cable.
If these corrective measures do not
produce satisfactory results, please
contact your local retailer authorized
to distribute VocoPro products. If
you can not locate the appropriate
retailer, please contact VocoPro,
1728 Curtiss Court, La Verne, CA
91750.
CAUTION:
The apparatus is not disconnected
from the AC power source so long
as it is connected to the wall outlet,
even if the apparatus itself is turned
off. To fully insure that the apparatus
is indeed fully void if residual power,
leave unit disconnected from the AC
outlet for at least fifteen seconds.
CAUTION:
READ THIS BEFORE OPERATIING
YOUR UNIT
1. To ensure the finest performance
please read this manual carefully.
7
FCC Information cont.
Keep it in a safe place for future
reference.
2. Install your unit in a cool, dry,
clean place - away from windows,
heat sources, and too much
vibration, dust, moisture or cold.
Avoid sources of hum (transform-
ers, v motors). To prevent fire
or electrical shock, do not expose
to rain and water.
3. Do not operate the unit up side-
down.
4. Never open the cabinet. If a
foreign object drops into the set,
contact your dealer.
5. Place the unit in a location with
adequate air circulation. Do not
interfere with its proper ventila-
tion; this will cause the internal
temperature to rise and may
result in a failure.
6. Do not use force on switches,
knobs or cords. When moving
the unit, first turn the unit off.
Then gently disconnect the power
plug and the cords connecting to
other equipment. Never pull the
cord itself.
7. Do not attempt to clean the unit
with chemical solvents: this might
damage the finish. Use a clean,
dry cloth.
8. Be sure to read the “Trouble-
shooting” section on common
operating errors before conclud
ing that your unit is faulty.
9. This unit consumes a fair amount
of power even when the power
switch is turned off. We recom-
mend that you unplug the power
cord from the wall outlet if the
unit is not going to be used for a
long time. This will save electricity
and help prevent fire hazards. To
disconnect the cord, pull it out
by grasping the plug. Never pull
the cord itself.
10. To prevent lightning damage,
pull out the power cord and
remove the antenna cable
during an electrical storm.
11. The general digital signals may
interfere with other equipment
such as tuners or receivers.
Move the system farther away
from such equipment if interfer-
ence is observed.
NOTE.
Please check the copyright laws in
your country before recording from
records, compact discs, radio, etc.
Recording of copyrighted material
may infringe copyright laws.
Voltage Selector (General Model
Only)
Be sure to position the voltage
selector to match the voltage of your
local power lines before installing
the unit.
110V
8
Listening for a Lifetime
Selecting fine audio equipment such as the unit you’ve just purchased is only
the start of your musical enjoyment. Now it’s time to consider how you can
maximize the fun and excitement your equipment offers. VocoPro and the
Electronic Industries Association’s Consumer Electronics Group want you to
get the most out of your equipment by playing it at a safe level. One that lets
the sound come through loud and clear without annoying blaring or distortion
and, most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to a
higher volume of sound. So what sounds “normal” can actually be loud and
harmful to your hearing. Guard against this by setting your equipment at a
safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you hear it comfortably and clearly,
and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
• Pay attention to the different levels in various recordings.
Taking a minute to do this now will help to prevent hearing damage or loss in
the future. After all, we want you listening for a lifetime.
Used wisely, your new sound equipment will provide a lifetime of fun and
enjoyment. Since hearing damage from loud noise is often undetectable until
it is too late, this manufacturer and the Electronic Industries Association’s
Consumer Electronics Group recommend you avoid prolonged exposure to
excessive noise. This list of sound levels is included for your protection.
Some common decibel ranges:
Level Example
30 Quiet library, Soft whis-
pers
40 Living room, Refrigera-
tor, Bedroom away from
traffic
50 Light traffic, Normal
Conversation
60 Air Conditioner at 20
ft., Sewing machine
70 Vacuum cleaner, Hair
dryer, Noisy Restaurant
80 Average city traffic,
Garbage disposals,
Alarm clock at 2 ft.
The following noises can be dangerous
under contant exposure:
Level Example
90 Subway, Motorcycle, Truck
traffic, Lawn Mower
100 Garbage truck, Chainsaw,
Pneumatics drill
120 Rock band concert in front of
speakers
140 Gunshot blast, Jet plane
180 Rocket launching pad
- Information courtesy of the
Deafness Research Foundation
9
Welcome
Thank you for purchasing the RECODE-1 from VocoPro, the singer’s ulti-
mate choice. With years of experience in the music entertainment business,
VocoPro is a leading manufacturer of Karaoke equipment, and has been pro-
viding patrons of bars, churches, schools, clubs and individual consumers the
opportunity to sound like a star with full-scale club models, in-home systems
and mobile units. All our products offer solid performance and sound reliabil-
ity, and to further strengthen our commitment to customer satisfaction, we
have customer service and technical support professionals ready to assist you
with your needs. We have provided some contact information for you below.
VocoPro
1728 Curtiss Court
La Verne, CA 91750
Toll Free: 800-678-5348
TEL: 909-593-8893
FAX: 909-593-8890
VocoPro Company E-mail Directory
Customer Service & General Information
Tech Support
techsuppor[email protected]
Remember Our Website
Be sure to visit the VocoPro Website www.vocopro.com for the latest infor-
mation on new products, packages and promos. And while you’re there don’t
forget to check out our Club VocoPro for Karaoke news and events, chat
rooms, club directories and even a Service directory!
We look forward to hearing you sound like a PRO, with VocoPro, the singer’s
ultimate choice.
FOR YOUR RECORDS
Please record the model number and serial number below, for easy refer-
ence, in case of loss or theft. These numbers are located on the rear panel
of the unit. Space is also provided for other relevant information.
Model Number
Serial Number
Date of Purchase
Place of Purchase
10
Features
Features:
• 512 MB Internal Memory - Expandable with
SD Memory Card Reader (SD Card Not
Incuded)
• Anti-Distort Technology ensures flawless
recording
• Includes RCA to Stereo Cables
• Review your Mp3 recordings instantly with the
included Headphones
• Includes Carrying Bag
Connections:
• Audio Input: Stereo Line-in
• Audio Output: 1/8” headphone/line-out jack
• PC Connection: USB
Memory:
• Internal 512 MB, Expandable via SD Card
(SD Card Not Included)
11
Getting Started
Thank you for purchasing the RECODE-1. Take a few
minutes to look through this manual. Before setting
up, please make sure the following accessories are
included.
• RECODE-1 recorder/media player (1)
• CARRYING BAG for RECODE-1 (1)
• HEADPHONES (1)
• RCA to 1/8” Stereo Cable (2)
Returns and Warranty
In the unlikely event that the RECODE-1 would need
to be shipped for repair, it is recommended that
you keep all the product packaging and receipt. For
detailed warranty information, please visit www.
vocopro.com/warranty_extended.html. To find a
VocoPro Authorized Service Center near you, please
visit www.vocopro.com/servicecenter.html
12
Getting Connected
Connecting a Source to the RECODE-1
What you will need:
• RCA to 1/8” Stereo Cable (Included)
• Mixer or Audio Output Device
1. Connect one end of the cable to the output
of your mixer
2. Connect the other end of the cable to the
INPUT of the RECODE-1
Mixer
13
Getting Connected cont.
RECODE-1 Playback Mode
What you will need:
• 1/8” to RCA Cable
• Headphones
You are able to immediately review your tracks on
the RECODE-1 as soon as the recording is com-
plete
Using Headphones:
1. Connect the head
phones to the HEAD-
PHONE/LINE OUT
jack at the base of
the RECODE-1
2. Press PLAY to enable
playback and review
your track. Use the
PREV/NEXT to re-
turn to or skip ahead
tracks and the STOP
button to end play
back mode.
14
Getting Connected cont.
Using 1/8” to RCA Cable:
1. Connect the end of the 1/8” cable to the
HEADPHONE/LINE OUT on the RECODE-1’s
base and connect the RCA end to an input
device such as a STEREO/MIXER or AMP.
Mixer
15
Recording with the RECODE-1
The RECODE-1 has 512 MB of internal memory
that will provide approximately 8 hours of available
time (128 kbps).
1. Power on the RECODE-1 by holding the POWER
button, hold until POWER LED lights up
2. Ensure that the RECODE-1 is connected to your
source via the included 1/8” to RCA cable
3. Hold the RECORD button to initiate recording
mode, the RECORD INDICATOR will blink, and
then press PLAY to start recording.
4. Stop the recording with the STOP function and
power the unit OFF.
• Your source will be recorded as a 128
kbps Mp3 file. If the memory limit is reached
before recording is manually ended, the
RECODE-1 will stop recording and automati-
cally save your file. It is recommended that
you replace the battery before beginning a
new recording session.
If additional memory is required, utilize expandable
SD Memory Card (Not Included)
16
Recording cont.
Utilizing Expandable SD Memory
• SD Memory Card (Not Included)
1. Ensure that the RECODE-1
is OFF
2. Insert your SD Memory
Card into the slot on the
bottom of the RECODE-1
3. The RECODE-1 will now
record directly to the SD
Memory Card
4. When removing the card
from the RECODE-1,
ensure that the power is
OFF. To remove the SD
card, press the card in
to eject.
17
Recording cont.
Connecting the RECODE-1 to a PC or
MAC Computer
What you will need:
• PC (WINDOWS XP) or MAC (OSX) computer with
USB inputs
1. Press and Slide open the USB connector on the
RECODE-1
2. Connect to a USB INPUT on your PC or MAC
computer
3. The RECODE-1 will appear as a single drive if
there is no SD card present, two drives will
appear if there is an SD card present.
4. Use your file manager to drag and drop files on
and off the RECODE-1. Recordings made by the
RECODE-1 will be stored in the RECORD folder.
Each file will appear as RECXXXX.MP3.
18
Descriptions & Functions
FRONT VIEW
1. POWER - Hold the POWER button to turn the
unit on or off. The POWER INDICATOR will be lit
green if the unit is on.
2. RECORD - Hold the RECORD button to initiate
recording mode, the RECORD INDICATOR will
blink, and then press PLAY to start recording.
3. PLAY - Enable playback mode to review recorded
Mp3 files
4. STOP - Stops recording mode or playback
5. PREV/NEXT - Press PREV to jump to the
previous track and NEXT to jump to the next
track.
6. POWER INDICATOR - This will be lit green to
indicate when the unit is powered on.
7. PLAY INDICATOR - This will be lit orange to
indicate when playback mode is enabled. It will
also be lit during record mode.
8. RECORD INDICATOR - This will be lit red to
indicate record mode is enabled.
9. VOLUME LEVEL INDICATOR - These lights
indicate the volume output level of the RECODE-1.
The volume is at the maximum level when all of
19
Descriptions cont.
the red lights are lit. The level indicator will stay lit
after power on if battery power is low.
20
Descriptions cont.
REAR VIEW
10. BATTERY COMPARTMENT - Slide the cover
upwards to reveal the compartment for the
single AAA battery.
LEFT SIDE VIEW
11. USB SLIDER - Slide this upwards to reveal the
USB connector for transferring files to or from
your computer.
12. VOLUME CONTROL - Press the + side of the
button to
increase the
volume output,
press the -
to decrease
volume output.
Other manuals for RECODE-1
1
Table of contents
Other VocoPro Voice Recorder manuals
