Volanti Displays VD-6500-0B09-11V2 User manual

Monitor Information
• Volanti Display 65” F-line multi-touch 4K
resolution monitor. See Input note below.
• Windows 10-point multi-touch, HID compatible
so just plug & play, no additional drivers or
software required if using Windows 8 or 10.
• Apple OS-X, single-point touch, plug & play. For
multi-touch 3rd party driver required.
• Input: Use 4K, Ultra-HD (3840x2160) @60Hz for
optimal image quality. Lower resolution input will
be scaled to ll the display. The aspect ratiop of
the display is 16:9, other aspect ratios may result
in black bars on the sides, for example a 4:3
image source will result in black bars left & right.
Maintenance: Ensure inside edges of the bezel are
not obstructed.
www.volantidisplays.com
Quick Start - Front
65” F-line 10point Touch - P/N: VD-6500-0B09-11V2
Installation:
• Review this quick-start guide and familiarize
yourself with the monitor.
• Remove the box lid, add brackets, then continue
to unpack & mount the monitor on wall or cart.
• Connect video signal & USB touch cables to PC
or other appropriate input source.
• Connect power supply to the monitor then plug
into AC mains as nal step.
Note: The monitor default is to power on when
an active video source is connected. This can be
changed through the OSD menu.
In the Box
The Volanti 65” F-line touch monitors comes with:
• Volanti 65” F-line touch monitor.
• Remote control (with batteries).
• Power supply and power cord.
• HDMI cable
• USB cable
All manuals and user guides at all-guides.com
all-guides.com

Removable
handle
OSD menu
buttons
Connectors
shown below
Quick Start - Back
65” F-line 10point Touch - P/N: VD-6500-0B09-11V2
© 2018 Volanti Displays v1.0 Nov 2018
Accessory Mounting Holes: On each side
there are two threaded mounting holes,
these are for mounting accessories such as a
camera for web conferencing or a soundbar.
Screw size M5, max depth 5mm.
Removable Access Plates: There are a
number of access plates on the enclosure.
These are for qualied service technicians
only and must not be removed.
Power
DC input
Serial
DB9
Ethernet
RJ45
HDMI x 3
4K @60/30/30Hz
USB - Touch
Type B
DVI-I (dual link)
supports VGA
Displayport
Removable
handle
Removable
handle
Removable
handle
On/O
Down
Up
(not used)
Menu
- (decrease)
+ (increase)
OSD Menu Buttons
VESA 400mm x 400mm
M6 mounting screws
Power LED
IR receiver
All manuals and user guides at all-guides.com