Volanti Displays VD-654K-T User manual

Monitor Information
• Volanti Display 65” multi-touch 4K resolution
monitor. See Input note below.
• Windows 10-point multi-touch, HID compatible
so just plug & play, no additional drivers or
software required if using Windows 8 or 10.
• Input: Use 4K, Ultra-HD (3840x2160) @60Hz for
optimal image quality. Lower resolution input will
be scaled to ll the display. The aspect ratiop of
the display is 16:9, other aspect ratios may result
in black bars on the sides, for example a 4:3
image source will result in black bars left & right.
Maintenance: Ensure inside edges of the bezel are
not obstructed.
www.volantidisplays.com
Quick Start - Front
65” 10point Touch - P/N: VD-654K-T
Installation:
• Review this quick-start guide and familiarize
yourself with the monitor.
• Remove the box lid, add brackets, then continue
to unpack & mount the monitor on wall or cart.
• Connect video signal & USB touch cables to PC
or other appropriate input source.
• Connect power supply to the monitor then plug
into AC mains as nal step.
Note: The monitor default is to power on when
an active video source is connected. This can be
changed through the OSD menu.
In the Box
The Volanti 65”touch monitor comes with:
• Volanti 65” touch monitor.
• Remote control (with batteries).
• Power supply and power cord.
• HDMI cable
• USB cable

Removable
handle
OSD menu
buttons
Connectors
shown below
Quick Start - Back
65” 10point Touch - P/N: VD-654K-T
© 2020 Volanti Displays v1.0 Jun 2020
Power
DC input
Serial
DB9
Ethernet
RJ45
HDMI x 3
4K @60/30/30Hz
USB - Touch
Type B
DVI-I (dual link)
supports VGA
Displayport
Removable
handle
Removable
handle
Removable
handle
Down
Up
Menu/On-O
- (decrease)
+ (increase)
OSD Menu Buttons
VESA 400mm x 400mm
M6 mounting screws
Power LED
IR receiver
IR sensor
Inputs & connectors
Power
Audio
out