
Auto-Disconnect Functionality
• Plug the Lightning end of the supplied cable into the charging port on your
device, the blue LED indicator will flash 3 times fast.
• If your device requires charging, the blue LED indicator will slowly flash on
and off to indicate charging.
• When your device reaches approximately 80% charge, the blue LED light
will stay on.
• Once the device is fully charged, the cable will automatically disconnect
power. After 2 to 3 hours, the cable will check the device charge status and
if required, it will commence charging again.
Please note: In order for the LED Indicator functionality to function as stated
your device screen must be off and no apps must be running.
Safety Precautions
• Ensure responsible use of this cable.
• Unplug the cable when not in use.
• Do not attempt to use this cable when performing tasks that require your
full attention.
• Do not expose this cable or any of its components to water, fire, high
temperatures or damp areas.
• Keep out of reach of children.
• Operate between 0° - 40° C.
• Do not store in temperatures over 140° F (60° C).
Safety Precautions
• Cleaning: Wipe down the surface of your VolkanoX Smart Series using a
soft, slightly damp cloth.
• Do not use any harsh or abrasive cleaning chemicals or materials on your
VolkanoX Smart Series as doing so may damage or scratch the surface
finish.
3