Volt Polska COMFORT BREEZE 1,2L User manual

PRODUCT MANUAL
COMFORT BREEZE
1,2L - 3,2L
VOLT POLSKA Sp. z o.o.
ul. Bitwy pod Płowcami 76
81-771 Sopot
www.voltpolska.pl
HUMIDIFIER

Thank you for purchasing the humidifier BREEZE COMFORT (1,2L & 3,2L) by
VOLT Polska. Please read this user manual before starting the device.
WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK, ALWAYS MAKE SURE
THE PRODUCT IS UNPLUGGED FROM THE ELECTRICAL OUTLET BEFORE
ASSEMBLING, DISASSEMBLING, RELOCATING, SERVICING, OR CLEANING IT.
1. In order to make better use of this machine, first read the instructions carefully.
2. Do not unauthorized demolition, repair, alteration, the electrical appliances.
3. lf the supply cord is damaged, it must be replaced by the manufacturer, its
service department, or other similar personnel in order to avoid danger.
4. Clean or move , please turn off the power and unplug the plug.
5 . Do not turn on the electrical state in the electrical to avoid burning the internal
electronic components.
6. The work of the machine, please put the child cannot touch the range.
7. The work of the machine, not touch the sink in the various components.
8. Do not pull the power cord unplug the power plug or wet hands touch the
power plug.
9. This machine can only be used for indoor use.
10. The power cord do not bend or heavy pressure.
11. Thunderstorms or long – term, do not pull out the power plug.
12. Adults need to supervise children to ensure that children do not play with the
machine.
13. Please place in a flat and solid place, avoid tilt.
14. Do not add in the water is not the company production, supervision or to allow
the addition of substances.
15. Do not use the company’s production, supervision or permission to use the
material clean appliances.
16. Please keep away from heat sources, avoid direct sunlight and try to stay
away from furniture, household appliances to avoid damp.
17. Do not in the electrical outlet and electrical appliances below the books and
towels and other items placed.
18. Please use at normal room temperature (temperature 5 ~40 C，relative
humidity < 80 % RH ).
19. Do not move the product while working or when there is water in the sink.
20. Cleaning to avoid water within the product failure.

OVERVIEW THE HUMIDIFIER
1. Water Lid
2. LED Display
3. Power (ON/OFF)
4. Timer
5. LED Lighting
6. Misting
Technical Parameters
Operation
1. Open the water lid (1) of the humidifier and fill with tap water and purified
water.
2. Press the on-/off-button(3) on the control panel to start the appliance. The
environmental temperature in °C and the current relative air humidity in % are
shown on the LED display(2).
3. Press the Mist button (6)to choose the desired Mist speed speed.
4. Press the Timer Button (4)to select the desired runtime. This is possible to set
“2H”,”4H”,”6”or”8H”.
5. Press the LED lighting button(5), there are different color changes. (The actual
color shall prevail).

Make the water tank empty:
If you do not use it for a long time, pick up the cover, keep the tank tilted in line
with the base, please empty the water from the tank to avoid odor.
CLEANING AND MAINTENANCE
NOTED: Before cleaning the appliance always disconnect the power plug from
the receptacle.
1. DO NOT dip the device in water, or splash it with any other liquids.
2. DO NOT use solvents or any other chemical products for cleaning it. When you
do not use it, after cleaning it, store the fan in a dry place.
3. When you have finished using the fan at the end of the season, wipe off any
dust to maintain it in good working order for the next season; if necessary
disassemble the grille and remove the fan; clean them with a soft damp cloth.
4. Remove the water tank and clean it with lukewarm water; before replace the
water tank in the unit make sure it is completely dry.
SPECIFICATION
POWER: 20W (1,2L); 25W (3,1L)
VOLTAGE:100-240V~ 50Hz
DIMESION: 148/131/278mm
Failure inspection and elimination method
If your humidifier does not work, please before request maintenance service for
the following inspection.

The fault
phenomenon
Cause analysis
Method of exclusion
The indicator light is
not displayed
1.Power is not connected
2.The power switch is not
open
1. Turn on the power
2. Turn on the power
switch
Indicator light, with
the wind, no fog
The fog volume is set to
the minimum level
Set to the desired fog
position
Spray a small
amount
1. For energy - chip scale
2. Dirty water or water
storage time is long
3. Low water temperature
4. Fog volume set at the
minimum gear
1. Cleaning - for - chip
2. Add a small
amount of hot water
to the sink
3. The replacement of
clean water
4. Set to the required
fog
Fog spills from the
tank cover or
around the nozzle
1. The tank cover and tank
with a gap
2. Nozzle and tank cover
with a gap
1. Remove the tank
cover, back cover
2. The nozzle with
wetting
Abnormal noise
1. Less water, causing
resonance
2. Place the table to
resonate
1. Add water to the
tank
2. Placed in a firm
and stable surface
Indicator light ,
water tank, but
always show the
status of water (red)
The float is jammed
Pull the float, let the
activities from top to
bottom smooth

FILL IN IF NEEDEED
(*) Cross incorrect
I agree to pay the cost of inverter repair due to:
* expiration of the warranty period / * warranty void
Before proceeding with the repair, service will inform by phone
about the exact costs of the repair.
Please attach a copy of the purchase document (receipt or invoice)
to the complaint.
The full regulations of service repairs can be found on our website
www.voltpolska.pl
DATA OF PURCHASE
SHIPPING ADDRESS
SIGNATURE/STAMP
DAMAGE DESCRIPTION
SERVICE COMMENTS
WARRANTY CARD