Voltek VPCDN1 User manual

39C Churchill Way, Lomeshaye Ind. Est.. Nelson, Lancashire. BB9 6RT. England
Tel: [phone] Fax: [phone] Helpline 09066 191 133*
Email [email protected] Website www.voltek.co.uk
*Helpline call cost 60p/minute. Open 9am to 5pm, Mon to Fri.
Voltek reserves the right to change any product or specification without notice
(c) 2001 Voltek Automation Ltd. Issue 2
Page 4 I N S T R U C T I O N S
I N S TA L LAT I O N
PRODUCT FEATURES
Thank you for purchasing the VPCDN14.3 Day Night Camera Kit. Please study
theseinstructionscarefullybeforeattemptingtooperatethe unit.
The camera kit will connect to any Monitor, Television, DVR or Video Recorder that
has a Scart, Phono or BNC socket. The camera gives high quality pictures allowing
you to watch the desired area such as the drive way, garden, baby room, office etc.
Simpleplug-&-goconnections for a fast and simple installation.
Full pan and tilt adjustment so that you can watch your desired area
easily.
Easily connected into and aerial distribution system using the CT210
UHFmodulater,allowing you to see the camerapicture on any television
throughoutthe property.
Page 1
Accessories For Your Camera
CT200 4 Way Camera Switcher
CT210 Wide Band TV Modulator
CT230 Time & Date Generator
CT250 15 Metre Extension Lead
For any further information on Voltek camera products or accessories please
contact Voltek sales line.
PowerSupply Input Voltage 220/240Vac50/60Hz
OutputVoltage 12V dc
Output Current 300mA (max)
Weatherproofing IP30 (Indoor use only)
Camera Lead Cable Type 4 core alarm cable
SPECIFICATIONS
This product has a twelve month manufacturers parts and labour warranty. In the
unlikely event that you encounter a problem with this product, please telephone
the Voltek helpline on 09066 191 133*. Should the problem not be able to be
resolved over the telephone it should be returned to the place of purchase or direct
to Voltek.
WARRANTY
VPCDN1 KIT
Day Night Camera Kit
Please check all the parts before proceeding with the installation.
Camerawith
30CMPhono
lead
18metre
Phonolead 12VPower Supply Fixing Kit
PACKAGE CONTENTS
Scart
Connector 2 x BNC Connector
Camera OperatingVoltage 12V dc
CurrentConsumption 300 mA Max
CameraType 1/3 “ Sony Super HAD CCD
HorizontalResolution 380 TV lines,
Lens 4.3mm(78 ºviewing angle)
MinimumIllumination 0.3 Lux F1.2 / 0 Lux IR On 10m Max
IRLED 12Unit850nM
VideoSignal Output 1Vpk-pk CompColour PAL
OperatingTemperature -10ºC to +40ºC
Weatherproofing IP54

Before you install the camera and cables, we recommend that you temporarily
connectthe camera to yourMonitor/TV (television) or VCR(videocassette
recorder)to help determine the bestposition for the camera.
The camera will connect to a spare Scart socket or phono socket on your TV or
VCR.
If you do not have any spare sockets, you will need to purchase either aAV
Switcher; or a CT210 Channel Convertor available from all good audio/video
retailers. Please see the instructions supplied with the switcher / modulator for
details on how to connect the camera.
There are two main ways in which the Camera may be connected to your
TV / VCR. See the methods below and choose the method most suitable for
yourinstallation.
CONNECTION METHOD 1
Page 3
Toview thecamerapicture;
1. Switch on the TV, VCR and power to the camera.
2. Select the VCR channel on your TV ( the channel you normally use for watching
video tapes).
3. Select theAV input on your VCR to view the camera picture. Note some models of
VCR use channel 0 for theAV input. See the VCR instructructions for further details.
The camera is suitable for indoor or outdoor use. Please bear in mind the
following points when choosing a mounting position.
•The camera must be postioned so that it will not point directly into the sun (sunrise
and sunset) or any bright light.or any very bright light. This may cause damage to
the camera.
•The camera must be positioned so that it will no point directly into the sun (sunrise
or sunset) or any bright light. This may cause damage to the camera
•Thebestviewing angle is achieved when mounted at approx 3 to 4metreshigh,
with the camera pointing downwards.
• Avoid viewingareaswhere half the area isinbright sunlight and the otherhalf is
dark, such as in the shadow of a building.All types of cameras have difficulty in
‘seeing’ with such a large lux level variation.
• Ensure a light is fitted near to the camera for night-time operation.
•The camera cable supplied may be extended up to approximately 100 metres.
When laying the cable, please bear in mind the following points.
Keep the cable away from other cables where possible to reduce the risk of
picture and audio interference.
Avoid laying the cable next to anything which runs hot which could burn the
cable. If the cable is run along the ground, a protective covering must be used to
prevent damage to the cable.
POSITIONING THE CAMERA
CONNECTION METHOD 2
Yellow White
18 metre
Phono lead
12VPower
Supply
BNC
Connector
BNC Video
Socket
Monitor
Not
Connected
Yellow
White
18 metre
Phono lead
Scart
Connector
For use with Volek
Accessories
Scart Socket
VCR
Aerial
TV
12VPower
Supply
For use with Volek
Accessories
INSTALLING THE CAMERA
Camerawith
2metrelead
White
Not Connected
Black
Camerawith
2metrelead
White
Not Connected
Black