Vornado Breesi User manual

nursery air circulator
Breesi
Hello, i’m
Own’s Handbk
read & save these important instructions
manual del propietario
lea y guarde estas instrucciones importantes
mode d’emploi
lire et conserver ces instructions importantes
Hola, me llamo Breesi, circulador de aire para salas de cuna.
Bonjour, je suis le Breesi, ventilateur de chambre de bébé.

2English
Welce to Vnadobaby
Vornado began in 1945, continues to revolutionize airflow today and is now tailored for the nursery.
®
A THIRD
genati
NAME
Thank you for choosing to put a Vornadobaby product in your nursery. Our
goal is to provide healthy, comfortable air - through every season. Vornado has
been doing this for quite a while now. We’ve brought all our experience in air
health and comfort, and tailored it exclusively for your nursery.

3
English
Español p. 17
Français p. 30
Important Instructions............................................................................. 4
Safety......................................................................................................... 6
Breesi Controls......................................................................................... 7
Plug In & Placement ................................................................................ 8
How To Use............................................................................................. 10
Keeping Breesi Clean............................................................................ 11
Tips .......................................................................................................... 13
Troubleshoot .......................................................................................... 14
Warranty.................................................................................................. 15
Contents

4English
Please visually inspect all internal and external components
before connecting to electric current. If any damage is found,
DO NOT USE THIS UNIT and contact Vornado Air LLC at
1-800-234-0604.
This appliance has a polarized plug. (One blade is wider than
the other.) To reduce the risk of electrical shock, this plug is
intended to fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not attempt to defeat this
safety feature.
WARNING – To reduce the risk of fire or electrical shock, do
not use this product with any solid state speed control device.
To reduce the risk of fire or electric shock and injury to persons,
do not use in a window.
This product employs overload protection (fuse). A blown
fuse indicates an overload or short-circuit situation. If the fuse
blows, unplug the product from the outlet. Replace the fuse as
per the user servicing instructions (follow product marking for
proper fuse rating) and check the product. If the replacement
fuse blows, a short-circuit may be present and the product
should be discarded or returned to an authorized service facil-
ity for examination and/or repair.
When using electrical appliances, basic precautions should
always be followed to reduce the risk of fire, electric shock, and
injury to persons, including the following:
- Read all instructions before using this circulator.
- Do use common sense when using this product and/or any
electrical appliance.
- Do unplug your circulator before cleaning.
- Do clean your Vornado Air Circulator regularly. Refer to the
CLEANING instructions provided. Never clean the air circula-
tor in any manner other than as instructed in this manual.
- Do Not use gasoline, thinners, solvents, ammonias or other
chemicals for cleaning.
- Do Not immerse this product in water or allow water to drip
into the motor housing.
- Do Not use near furnaces, fireplaces, stoves or other high-
temperature heat sources.
- Always unplug when not in use or when leaving the dwelling
or premises for extended periods of time.
- Do Not carry this product by the cord, or use the cord as a
handle.
- Do Not operate any circulator with a damaged cord or
plug or after the circulator malfunctions, has been dropped
IMPORTANT
INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING.

5
English
or damaged in any manner. Discard circulator, or return to
authorized service facility for examination and/or repair.
- Do Not attempt to repair or replace parts.
- Do Not use outdoors.
- Do Not use this product on wet surfaces.
- Do Not use this product in a bathtub or shower.
- Do Not run cord under carpeting. Do not cover cord with
throw rugs, runners, or similar coverings. Do not route cord
under furniture or appliances. Arrange cord away from traffic
area and where it will not be tripped over.
- To disconnect circulator, turn controls to off, then remove plug
from outlet.
- Do Not position this product too close to draperies because
they may be drawn into the rear grill, cutting off airflow.
- Use this circulator only as described in this manual. Any other
use not recommended by the manufacturer may cause fire,
electric shock, or injury to persons.
- Operate this circulator only in its upright position.
- Do Not use this circulator on a circuit that has a variable
speed device operating, such as a blender or a variable
speed fan.
User Servicing Instructions
Grasp plug and remove from the receptacle or other outlet de-
vice. Do not unplug by pulling on cord. Open fuse cover (A.) by
sliding access cover on top of attachment plug towards blades.
Remove fuse carefully (B.) by gently prying out the ends of the
fuse from the receptacle.
Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.
Contact Vornado customer service for replacement fuse.
Phone: [phone], email: [e-mail]
Install replacement fuse (C.) by first placing the end of the fuse
into the fuse receptacle which is opposite of the blades of the
plug, then carefully push in the other end. Only push against
the metal end of the fuse, not the glass center portion. Close
the fuse access cover (D.) by sliding the cover back into the
plug until it is completely closed, latches and is flush with the
face of the plug. Risk of fire. Do not replace attachment plug.
Contains a safety device (fuse, AFCI, LCDI) that should not be
removed. Discard product if the attachment plug is damaged.
READ AND SAVE THESE INSTRUCTIONS
A. B. C. D.

6English
Plug It In Safely! Your Breesi has a 6 ft. power cord, covered for additional safety. Vornado
recommends placing product as close to an outlet as possible and securing the remaining cord.
Safety
Finger Friendly Design
Resists curious fingers.
Covered Power Cord
Storage
Safely store power cord inside
base of Breesi.
No Pinch Points or
Sharp Edges
To help protect a tumbling
toddler.
No Exposure to
Mechanical Parts
360° of protection.
Child Locking Switch
Keep Breesi Off when not
in use.

7
English
Power ( )
Breesi Controls
Fan ( - High, Low)
Control Lock ( )
1
2
3
1 2
3

8English
Power Cord Storage
For your convenience and safety the Power Cord
Storage keeps the power cord neat and out of
harms way.
1. Lift the Power Cord Storage flap to locate
plug, then unwind the power cord stored
inside.
Safety Tip: Power cords increase strangulation
risks. Secure as much excess cord as possible
inside the Power Cord Storage.
Plug In & Placement
Power Cord
Storage flap

9
English
Set Up
1. Position your Breesi so the vortex beam of air
is directed across the room, unobstructed.
2. Plug power cord into standard wall outlet.
Safety Tip: It is best to position the Breesi close
to the power outlet and store excess power cord
inside the Power Cord Storage.

10 English
Breesi features a child-resistant switch,
keeping the fan in parents’ desired setting.
Lockable Controls
1. Push down and slide the Control Lock to
power On and adjust fan speeds.
Operation
1. Select a desired Fan speed. Push and slide the
Control Lock to High speed ( ) or Low speed
( ).
2. Adjust the airflow direction by pivoting the
Breesi head.
3. Push down and slide the Control Lock to the
( ) position to power Breesi Off.
Note: When selecting speed, make sure the
switch is fully engaged into the High speed, Low
speed or Off setting.
How To Use

11
English
Cleaning the Grill
1. Power Breesi Off and unplug.
2. Using a Phillips Head screwdriver, remove the
screw located at the 6 o’clock position in the
front of the grill.
3. Twist Grill counterclockwise to unlock and pull
out.
4. Dust or vacuum the Grill and Blade.
Note: Do not use gasoline, thinners, solvents
or other chemicals for cleaning. Do not wash in
dishwasher.
Keeping Breesi Clean
Always unplug Breesi before starting any part of the cleaning process.
twist
counter-
clockwise
remove
screw

12 English
5. Reinstall Grill. Replace Grill onto Breesi and
twist clockwise until the Grill aligns with the
screw hole. Replace screw.
Cleaning the Blade
It is possible to remove the blade should
something accidentally get wrapped around the
motor shaft.
1. First, remove the nut
from the shaft. Turn the
nut clockwise to loosen.
Pull the Blade straight
out from the shaft.
2. When replacing, be
certain the flat side of
the shaft aligns directly
with the corresponding flat
side on the Blade’s socket.
Push the Blade all the way
on the shaft. Do not use a
hammer as this could result in
bearing damage. Reinstall nut
counter-clockwise until secure.
Keeping Breesi Clean
twist
clockwise

13
English
• During the off-season or after extended peri-
ods of non-use, you may choose to store your
Breesi. To ensure long life of the product, it is
recommended to store your Breesi by follow-
ing these instructions:
• Unplug power cord and wrap cord neatly
inside the Power Cord Storage.
• Thoroughly clean your Breesi. Use the
brush attachment on your household vac-
uum cleaner to vacuum any accumulated
dust on Breesi or wipe down the entire
surface with a soft cloth. You may also use a
can of compressed air for debris.
• Always set Power to Off and unplug Breesi
before cleaning.
• Cover, or place Breesi back into retail car-
ton if available. This will prevent Breesi
from accumulating dust over time.
• Store Breesi in a cool and dry location.
• The motor is permanently lubricated and re-
quires no oiling. Do not use gasoline, thinners,
solvents or other chemicals for cleaning.
• Your Breesi has no user serviceable parts. Do
not disassemble Breesi. This will void your
warranty. If service is required, return your
Breesi to Vornado (see WARRANTY for instruc-
tions).
Tips

14 English
Unit is not plugged in. Plug Power Cord into electrical outlet.
Ensure unit fan speed setting is fully engaged.
Plug fuse has blown. Replace fuse (See USER SERVICING INSTRUC-
TIONS on page 5).
Unit is damaged or in need of repair. Cease usage and unplug. Con-
tact Consumer Service for assistance.
The outlet is worn or damaged. Try another outlet or contact a qualified
electrician.
Unit set to a low speed setting. Adjust to a higher speed setting.
Airflow is blocked. Remove obstruction.
Adjust direction of airflow towards the user.
When selecting speed, make sure the switch is fully engaged into the
High speed or Low speed setting.
Unit fails to
power on.
Airflow is weak
or slow.
Troubleshoot