VP Recycled Plastic APT-05-071018-RF User manual

Nursery Picnic Table
with Sandbox
Assembly Guide
0808 1699 838
APT-05-071018-RF

Notes:
2

Tools required
17mm Spanner
6mm Allen Key
x1
x1
Parts and Fittings
Sand Box
Fittings
Two People required
for safe assembly
x8 x16
Bench Seat
3
Sand Box Lid
x2
Legs
x3
x2
x1
x8
90mm

Step
1
Place the sand box
slat face down on any
soft, flat surface.
Do not over-tighten bolts during assembly as
small adjustments will help parts fit.
Step
2
4
90mm
x4 x8x4
Use the Spanner and Allenkey
to attach the legs
x2
Legs

x2
Bench Seat
Step
3
x4
90mm
x4
x8
Step
4
5
Flip table using two people.
One person should hold the bench seat up in position.
The other person can then tighten nuts and bolts with a spanner and an allen key.
Repeat for other side. Ensure all nuts and bolts are fully tightened at this step.

6
Step
5
Fill sand box with sand and place lid over top
Enjoy your new Picnic Table with Sandbox

Notes:
7

8
CONTACT DETAILS:
Email: [email protected]
Web: www.vprecycledplastic.co.uk
Tel: [phone]
Value Products Ltd Unit B, Sharp Road, Poole, BH12 4BG
THANK YOU
FOR PURCHASING THIS PRODUCT
All Parts and Fixings checked by:
Print Name: Signature